From 3f2546b2ef55b661fd8dd69682b38992225e86f6 Mon Sep 17 00:00:00 2001 From: fishsoupisgood Date: Mon, 29 Apr 2019 01:17:54 +0100 Subject: Initial import of qemu-2.4.1 --- roms/u-boot/board/congatec/cgtqmx6eval/README | 28 +++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 roms/u-boot/board/congatec/cgtqmx6eval/README (limited to 'roms/u-boot/board/congatec/cgtqmx6eval/README') diff --git a/roms/u-boot/board/congatec/cgtqmx6eval/README b/roms/u-boot/board/congatec/cgtqmx6eval/README new file mode 100644 index 00000000..5e76d2ac --- /dev/null +++ b/roms/u-boot/board/congatec/cgtqmx6eval/README @@ -0,0 +1,28 @@ +U-Boot for the Congatec Conga-QEVAl Evaluation Carrier board with +qmx6 quad module. + +This file contains information for the port of U-Boot to the Congatec +Conga-QEVAl Evaluation Carrier board with qmx6 quad module. + +1. Boot source, boot from SD card +--------------------------------- + +By default, the Congatec board can boot only from the SPI-NOR. +But, with the u-boot version provided with the board you can write boot +registers to force the board to reboot and boot from the SD slot. If +"bmode" command is not available from your pre-installed u-boot, these +instruction will produce the same effect: + +conga-QMX6 U-Boot > mw.l 0x20d8040 0x3850 +conga-QMX6 U-Boot > mw.l 0x020d8044 0x10000000 +conga-QMX6 U-Boot > reset +resetting ... + +The the board will reboot and, if you have written your SD correctly +the board will use u-boot that live into the SD + +To copy the resulting u-boot.imx to the SD card: + + dd if=u-boot.imx of=/dev/xxx bs=512 seek=2 + +Note: Replace xxx with the device representing the SD card in your system. -- cgit v1.2.3