diff options
Diffstat (limited to 'tinyusb/hw/bsp/stm32f0')
| -rwxr-xr-x | tinyusb/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h | 93 | ||||
| -rwxr-xr-x | tinyusb/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk | 11 | ||||
| -rwxr-xr-x | tinyusb/hw/bsp/stm32f0/boards/stm32f070rbnucleo/stm32F070rbtx_flash.ld | 200 | ||||
| -rwxr-xr-x | tinyusb/hw/bsp/stm32f0/boards/stm32f072disco/STM32F072RBTx_FLASH.ld | 169 | ||||
| -rwxr-xr-x | tinyusb/hw/bsp/stm32f0/boards/stm32f072disco/board.h | 85 | ||||
| -rwxr-xr-x | tinyusb/hw/bsp/stm32f0/boards/stm32f072disco/board.mk | 11 | ||||
| -rwxr-xr-x | tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/STM32F072VBTx_FLASH.ld | 177 | ||||
| -rwxr-xr-x | tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/board.h | 102 | ||||
| -rwxr-xr-x | tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/board.mk | 11 | ||||
| -rwxr-xr-x | tinyusb/hw/bsp/stm32f0/family.c | 179 | ||||
| -rwxr-xr-x | tinyusb/hw/bsp/stm32f0/family.mk | 40 | ||||
| -rwxr-xr-x | tinyusb/hw/bsp/stm32f0/stm32f0xx_hal_conf.h | 321 |
12 files changed, 0 insertions, 1399 deletions
diff --git a/tinyusb/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h b/tinyusb/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h deleted file mode 100755 index 7c527e2c..00000000 --- a/tinyusb/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h +++ /dev/null @@ -1,93 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PORT GPIOA -#define LED_PIN GPIO_PIN_5 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_DEV USART2 -#define UART_CLK_EN __HAL_RCC_USART2_CLK_ENABLE -#define UART_GPIO_PORT GPIOA -#define UART_GPIO_AF GPIO_AF1_USART2 -#define UART_TX_PIN GPIO_PIN_2 -#define UART_RX_PIN GPIO_PIN_3 - -//--------------------------------------------------------------------+ -// RCC Clock -//--------------------------------------------------------------------+ -static inline void board_stm32f0_clock_init(void) -{ - /* Configure the system clock to 48 MHz */ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; - - /* Enable HSE Oscillator and activate PLL with 8 MHz HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6; - RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 - clocks dividers */ - RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1; - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1); - - - PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB; - PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLL; - HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) ; -} - -static inline void board_vbus_sense_init(void) -{ -} - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk b/tinyusb/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk deleted file mode 100755 index 9e636cd7..00000000 --- a/tinyusb/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -CFLAGS += -DSTM32F070xB - -LD_FILE = $(BOARD_PATH)/stm32F070rbtx_flash.ld - -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f070xb.s - -# For flash-jlink target -JLINK_DEVICE = stm32f070rb - -# flash target using on-board stlink -flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f0/boards/stm32f070rbnucleo/stm32F070rbtx_flash.ld b/tinyusb/hw/bsp/stm32f0/boards/stm32f070rbnucleo/stm32F070rbtx_flash.ld deleted file mode 100755 index 59e18f37..00000000 --- a/tinyusb/hw/bsp/stm32f0/boards/stm32f070rbnucleo/stm32F070rbtx_flash.ld +++ /dev/null @@ -1,200 +0,0 @@ -/* -****************************************************************************** -** -** File : LinkerScript.ld -** -** Author : Auto-generated by STM32CubeIDE -** -** Abstract : Linker script for STM32F070RBTx Device from STM32F0 series -** 128Kbytes FLASH -** 16Kbytes RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** Distribution: The file is distributed as is without any warranty -** of any kind. -** -***************************************************************************** -** @attention -** -** <h2><center>© COPYRIGHT(c) 2019 STMicroelectronics</center></h2> -** -** Redistribution and use in source and binary forms, with or without modification, -** are permitted provided that the following conditions are met: -** 1. Redistributions of source code must retain the above copyright notice, -** this list of conditions and the following disclaimer. -** 2. Redistributions in binary form must reproduce the above copyright notice, -** this list of conditions and the following disclaimer in the documentation -** and/or other materials provided with the distribution. -** 3. Neither the name of STMicroelectronics nor the names of its contributors -** may be used to endorse or promote products derived from this software -** without specific prior written permission. -** -** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20004000; /* end of "RAM" Ram type memory */ - -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Memories definition */ -MEMORY -{ - RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 16K - FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 128K -} - -/* Sections */ -SECTIONS -{ - /* The startup code into "FLASH" Rom type memory */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data into "FLASH" Rom type memory */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data into "FLASH" Rom type memory */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { - . = ALIGN(4); - *(.ARM.extab* .gnu.linkonce.armextab.*) - . = ALIGN(4); - } >FLASH - - .ARM : { - . = ALIGN(4); - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - . = ALIGN(4); - } >FLASH - - .preinit_array : - { - . = ALIGN(4); - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - . = ALIGN(4); - } >FLASH - - .init_array : - { - . = ALIGN(4); - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - . = ALIGN(4); - } >FLASH - - .fini_array : - { - . = ALIGN(4); - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - . = ALIGN(4); - } >FLASH - - /* Used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections into "RAM" Ram type memory */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - - } >RAM AT> FLASH - - /* Uninitialized data section into "RAM" Ram type memory */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - /* Remove information from the compiler libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} diff --git a/tinyusb/hw/bsp/stm32f0/boards/stm32f072disco/STM32F072RBTx_FLASH.ld b/tinyusb/hw/bsp/stm32f0/boards/stm32f072disco/STM32F072RBTx_FLASH.ld deleted file mode 100755 index 8d31f6a0..00000000 --- a/tinyusb/hw/bsp/stm32f0/boards/stm32f072disco/STM32F072RBTx_FLASH.ld +++ /dev/null @@ -1,169 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32F072RBTx Device with -** 128KByte FLASH, 16KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20004000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 128K -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 16K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} - - diff --git a/tinyusb/hw/bsp/stm32f0/boards/stm32f072disco/board.h b/tinyusb/hw/bsp/stm32f0/boards/stm32f072disco/board.h deleted file mode 100755 index 0b1824b8..00000000 --- a/tinyusb/hw/bsp/stm32f0/boards/stm32f072disco/board.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PORT GPIOC -#define LED_PIN GPIO_PIN_6 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 1 - -// UART -#define UART_DEV USART1 -#define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE -#define UART_GPIO_PORT GPIOA -#define UART_GPIO_AF GPIO_AF1_USART1 -#define UART_TX_PIN GPIO_PIN_9 -#define UART_RX_PIN GPIO_PIN_10 - -//--------------------------------------------------------------------+ -// RCC Clock -//--------------------------------------------------------------------+ -static inline void board_stm32f0_clock_init(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - - /* Select HSI48 Oscillator as PLL source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48; - RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI48; - RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV2; - RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL2; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Select PLL as system clock source and configure the HCLK and PCLK1 clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1); -} - -static inline void board_vbus_sense_init(void) -{ -} - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f0/boards/stm32f072disco/board.mk b/tinyusb/hw/bsp/stm32f0/boards/stm32f072disco/board.mk deleted file mode 100755 index 2ef0ee63..00000000 --- a/tinyusb/hw/bsp/stm32f0/boards/stm32f072disco/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -CFLAGS += -DSTM32F072xB - -LD_FILE = $(BOARD_PATH)/STM32F072RBTx_FLASH.ld - -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f072xb.s - -# For flash-jlink target -JLINK_DEVICE = stm32f072rb - -# flash target using on-board stlink -flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/STM32F072VBTx_FLASH.ld b/tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/STM32F072VBTx_FLASH.ld deleted file mode 100755 index 581613a5..00000000 --- a/tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/STM32F072VBTx_FLASH.ld +++ /dev/null @@ -1,177 +0,0 @@ -/** - ****************************************************************************** - * @file LinkerScript.ld - * @author Auto-generated by STM32CubeIDE - * Abstract : Linker script for STM32072B-EVAL Board embedding STM32F072VBTx Device from stm32f0 series - * 128Kbytes FLASH - * 16Kbytes RAM - * - * Set heap size, stack size and stack location according - * to application requirements. - * - * Set memory bank area and size if external memory is used - ****************************************************************************** - * @attention - * - * <h2><center>© Copyright (c) 2020 STMicroelectronics. - * All rights reserved.</center></h2> - * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ - -_Min_Heap_Size = 0x200 ; /* required amount of heap */ -_Min_Stack_Size = 0x400 ; /* required amount of stack */ - -/* Memories definition */ -MEMORY -{ - RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 16K - FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 128K -} - -/* Sections */ -SECTIONS -{ - /* The startup code into "FLASH" Rom type memory */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data into "FLASH" Rom type memory */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data into "FLASH" Rom type memory */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { - . = ALIGN(4); - *(.ARM.extab* .gnu.linkonce.armextab.*) - . = ALIGN(4); - } >FLASH - - .ARM : { - . = ALIGN(4); - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - . = ALIGN(4); - } >FLASH - - .preinit_array : - { - . = ALIGN(4); - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - . = ALIGN(4); - } >FLASH - - .init_array : - { - . = ALIGN(4); - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - . = ALIGN(4); - } >FLASH - - .fini_array : - { - . = ALIGN(4); - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - . = ALIGN(4); - } >FLASH - - /* Used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections into "RAM" Ram type memory */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - *(.RamFunc) /* .RamFunc sections */ - *(.RamFunc*) /* .RamFunc* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - - } >RAM AT> FLASH - - /* Uninitialized data section into "RAM" Ram type memory */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss section */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - /* Remove information from the compiler libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} diff --git a/tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/board.h b/tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/board.h deleted file mode 100755 index 8869d5dc..00000000 --- a/tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/board.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PORT GPIOD -#define LED_PIN GPIO_PIN_8 // LED1, GREEN -// #define LED_PIN GPIO_PIN_9 // LED2, ORANGE -// #define LED_PIN GPIO_PIN_10 // LED3, RED -// #define LED_PIN GPIO_PIN_11 // LED4, BLUE -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 // JOY_SEL -#define BUTTON_STATE_ACTIVE 1 - -// UART -#define UART_DEV USART2 -#define UART_CLK_EN __HAL_RCC_USART2_CLK_ENABLE -#define UART_GPIO_PORT GPIOD -#define UART_GPIO_AF GPIO_AF0_USART2 -#define UART_TX_PIN GPIO_PIN_5 -#define UART_RX_PIN GPIO_PIN_6 - -//--------------------------------------------------------------------+ -// RCC Clock -//--------------------------------------------------------------------+ -static inline void board_stm32f0_clock_init(void) -{ - RCC_OscInitTypeDef RCC_OscInitStruct = {0}; - RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; - RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; - - /** Initializes the RCC Oscillators according to the specified parameters - * in the RCC_OscInitTypeDef structure. - */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48; - RCC_OscInitStruct.HSEState = RCC_HSE_OFF; - RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; - RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6; - RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; - - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /** Initializes the CPU, AHB and APB buses clocks - */ - RCC_ClkInitStruct.ClockType = - RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1; - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; - - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1); - - PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB | RCC_PERIPHCLK_USART2; - PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1; - PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; - - HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit); -} - -static inline void board_vbus_sense_init(void) -{ -} - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/board.mk b/tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/board.mk deleted file mode 100755 index f7f8c84e..00000000 --- a/tinyusb/hw/bsp/stm32f0/boards/stm32f072eval/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -CFLAGS += -DSTM32F072xB -DLSI_VALUE=40000 - -LD_FILE = $(BOARD_PATH)/STM32F072VBTx_FLASH.ld - -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f072xb.s - -# For flash-jlink target -JLINK_DEVICE = stm32f072vb - -# flash target using on-board stlink -flash: flash-stlink diff --git a/tinyusb/hw/bsp/stm32f0/family.c b/tinyusb/hw/bsp/stm32f0/family.c deleted file mode 100755 index 853bb9d6..00000000 --- a/tinyusb/hw/bsp/stm32f0/family.c +++ /dev/null @@ -1,179 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "stm32f0xx_hal.h" -#include "bsp/board.h" -#include "board.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -UART_HandleTypeDef UartHandle; - -void board_init(void) -{ - board_stm32f0_clock_init(); - - // Enable All GPIOs clocks - __HAL_RCC_GPIOA_CLK_ENABLE(); - __HAL_RCC_GPIOB_CLK_ENABLE(); - __HAL_RCC_GPIOC_CLK_ENABLE(); - __HAL_RCC_GPIOD_CLK_ENABLE(); - __HAL_RCC_GPIOF_CLK_ENABLE(); - - // Enable UART Clock - UART_CLK_EN(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); - -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - - // LED - GPIO_InitTypeDef GPIO_InitStruct; - GPIO_InitStruct.Pin = LED_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); - - // Button - GPIO_InitStruct.Pin = BUTTON_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_PULLDOWN; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); - - // Uart - GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Alternate = UART_GPIO_AF; - HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct); - - UartHandle.Instance = UART_DEV; - UartHandle.Init.BaudRate = CFG_BOARD_UART_BAUDRATE; - UartHandle.Init.WordLength = UART_WORDLENGTH_8B; - UartHandle.Init.StopBits = UART_STOPBITS_1; - UartHandle.Init.Parity = UART_PARITY_NONE; - UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE; - UartHandle.Init.Mode = UART_MODE_TX_RX; - UartHandle.Init.OverSampling = UART_OVERSAMPLING_16; - HAL_UART_Init(&UartHandle); - - // USB Pins - // Configure USB DM and DP pins. This is optional, and maintained only for user guidance. - GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - // USB Clock enable - __HAL_RCC_USB_CLK_ENABLE(); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - HAL_UART_Transmit(&UartHandle, (uint8_t*) buf, len, 0xffff); - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -void HardFault_Handler (void) -{ - asm("bkpt"); -} - -#ifdef USE_FULL_ASSERT -/** - * @brief Reports the name of the source file and the source line number - * where the assert_param error has occurred. - * @param file: pointer to the source file name - * @param line: assert_param error line source number - * @retval None - */ -void assert_failed(uint8_t* file, uint32_t line) -{ - (void) file; (void) line; - /* USER CODE BEGIN 6 */ - /* User can add his own implementation to report the file name and line number, - tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ - /* USER CODE END 6 */ -} -#endif /* USE_FULL_ASSERT */ - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/tinyusb/hw/bsp/stm32f0/family.mk b/tinyusb/hw/bsp/stm32f0/family.mk deleted file mode 100755 index 08cbf562..00000000 --- a/tinyusb/hw/bsp/stm32f0/family.mk +++ /dev/null @@ -1,40 +0,0 @@ -UF2_FAMILY_ID = 0x647824b6 -ST_FAMILY = f0 -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) -ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -include $(TOP)/$(BOARD_PATH)/board.mk - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m0 \ - -mfloat-abi=soft \ - -nostdlib -nostartfiles \ - -DCFG_EXAMPLE_MSC_READONLY \ - -DCFG_TUSB_MCU=OPT_MCU_STM32F0 - -# suppress warning caused by vendor mcu driver -CFLAGS += -Wno-error=unused-parameter -Wno-error=cast-align - -SRC_C += \ - src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ - $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ - $(TOP)/$(ST_CMSIS)/Include \ - $(TOP)/$(ST_HAL_DRIVER)/Inc - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM0 diff --git a/tinyusb/hw/bsp/stm32f0/stm32f0xx_hal_conf.h b/tinyusb/hw/bsp/stm32f0/stm32f0xx_hal_conf.h deleted file mode 100755 index cfa66b36..00000000 --- a/tinyusb/hw/bsp/stm32f0/stm32f0xx_hal_conf.h +++ /dev/null @@ -1,321 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_hal_conf.h - * @author MCD Application Team - * @brief HAL configuration file. - ****************************************************************************** - * @attention - * - * <h2><center>© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.</center></h2> - * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F0xx_HAL_CONF_H -#define __STM32F0xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/*#define HAL_ADC_MODULE_ENABLED */ -/*#define HAL_CAN_MODULE_ENABLED */ -/*#define HAL_CEC_MODULE_ENABLED */ -/*#define HAL_COMP_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/*#define HAL_CRC_MODULE_ENABLED */ -/*#define HAL_DAC_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -#define HAL_FLASH_MODULE_ENABLED -#define HAL_GPIO_MODULE_ENABLED -/*#define HAL_EXTI_MODULE_ENABLED */ -/*#define HAL_I2C_MODULE_ENABLED */ -/*#define HAL_I2S_MODULE_ENABLED */ -/*#define HAL_IRDA_MODULE_ENABLED */ -/*#define HAL_IWDG_MODULE_ENABLED */ -#define HAL_PCD_MODULE_ENABLED -#define HAL_PWR_MODULE_ENABLED -#define HAL_RCC_MODULE_ENABLED -/*#define HAL_RTC_MODULE_ENABLED */ -/*#define HAL_SMARTCARD_MODULE_ENABLED */ -/*#define HAL_SMBUS_MODULE_ENABLED */ -/*#define HAL_SPI_MODULE_ENABLED */ -/*#define HAL_TIM_MODULE_ENABLED */ -/*#define HAL_TSC_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/*#define HAL_USART_MODULE_ENABLED */ -/*#define HAL_WWDG_MODULE_ENABLED */ - -/* ######################### Oscillator Values adaptation ################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -/** - * @brief In the following line adjust the External High Speed oscillator (HSE) Startup - * Timeout value - */ -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE 8000000U /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup - * Timeout value - */ -#if !defined (HSI_STARTUP_TIMEOUT) - #define HSI_STARTUP_TIMEOUT 5000U /*!< Time out for HSI start up */ -#endif /* HSI_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator for ADC (HSI14) value. - */ -#if !defined (HSI14_VALUE) - #define HSI14_VALUE 14000000U /*!< Value of the Internal High Speed oscillator for ADC in Hz. - The real value may vary depending on the variations - in voltage and temperature. */ -#endif /* HSI14_VALUE */ - -/** - * @brief Internal High Speed oscillator for USB (HSI48) value. - */ -#if !defined (HSI48_VALUE) - #define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB in Hz. - The real value may vary depending on the variations - in voltage and temperature. */ -#endif /* HSI48_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE 32000U -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -/** - * @brief Time out for LSE start up value in ms. - */ -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE 3300U /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)(1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority (lowest by default) */ - /* Warning: Must be set to higher priority for HAL_Delay() */ - /* and HAL_GetTick() usage under interrupt context */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 0U -#define DATA_CACHE_ENABLE 0U -#define USE_SPI_CRC 1U - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_TSC_REGISTER_CALLBACKS 0U /* TSC register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ - #define USE_FULL_ASSERT 1 - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f0xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f0xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f0xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f0xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f0xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f0xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f0xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f0xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_COMP_MODULE_ENABLED - #include "stm32f0xx_hal_comp.h" -#endif /* HAL_COMP_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f0xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f0xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f0xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f0xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f0xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f0xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f0xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f0xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f0xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f0xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f0xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32f0xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f0xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f0xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_TSC_MODULE_ENABLED - #include "stm32f0xx_hal_tsc.h" -#endif /* HAL_TSC_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f0xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f0xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f0xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F0xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - |