diff options
Diffstat (limited to 'tinyusb/hw/bsp/ea4088qs/ea4088qs.c')
| -rwxr-xr-x | tinyusb/hw/bsp/ea4088qs/ea4088qs.c | 190 |
1 files changed, 0 insertions, 190 deletions
diff --git a/tinyusb/hw/bsp/ea4088qs/ea4088qs.c b/tinyusb/hw/bsp/ea4088qs/ea4088qs.c deleted file mode 100755 index b25f9101..00000000 --- a/tinyusb/hw/bsp/ea4088qs/ea4088qs.c +++ /dev/null @@ -1,190 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "chip.h" -#include "../board.h" - -//--------------------------------------------------------------------+ -// USB Interrupt Handler -//--------------------------------------------------------------------+ -void USB_IRQHandler(void) -{ - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST - tuh_int_handler(0); - #endif - - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE - tud_int_handler(0); - #endif -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ -#define LED_PORT 2 -#define LED_PIN 19 - -#define BUTTON_PORT 2 -#define BUTTON_PIN 10 - -/* System oscillator rate and RTC oscillator rate */ -const uint32_t OscRateIn = 12000000; -const uint32_t RTCOscRateIn = 32768; - -/* Pin muxing configuration */ -static const PINMUX_GRP_T pinmuxing[] = -{ - // LED - {2, 19, (IOCON_FUNC0 | IOCON_MODE_INACT)}, - - // Button - {2, 10, (IOCON_FUNC0 | IOCON_MODE_INACT | IOCON_MODE_PULLUP)}, -}; - -static const PINMUX_GRP_T pin_usb_mux[] = -{ - // USB1 as Host - {0, 29, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // D+1 - {0, 30, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // D-1 - {1, 18, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // UP LED1 - {1, 19, (IOCON_FUNC2 | IOCON_MODE_INACT)}, // PPWR1 -// {2, 14, (IOCON_FUNC2 | IOCON_MODE_INACT)}, // VBUS1 -// {2, 15, (IOCON_FUNC2 | IOCON_MODE_INACT)}, // OVRCR1 - - // USB2 as Device - {0, 31, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // D+2 - {0, 13, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // UP LED - {0, 14, (IOCON_FUNC3 | IOCON_MODE_INACT)}, // CONNECT2 - - /* VBUS is not connected on this board, so leave the pin at default setting. */ - /*Chip_IOCON_PinMux(LPC_IOCON, 1, 30, IOCON_MODE_INACT, IOCON_FUNC2);*/ /* USB VBUS */ -}; - -// Invoked by startup code -void SystemInit(void) -{ -#ifdef __USE_LPCOPEN - extern void (* const g_pfnVectors[])(void); - unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; - *pSCB_VTOR = (unsigned int) g_pfnVectors; - -#if __FPU_USED == 1 - fpuInit(); -#endif -#endif // __USE_LPCOPEN - - Chip_IOCON_Init(LPC_IOCON); - Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); - - /* CPU clock source starts with IRC */ - /* Enable PBOOST for CPU clock over 100MHz */ - Chip_SYSCTL_EnableBoost(); - - Chip_SetupXtalClocking(); -} - -void board_init(void) -{ - SystemCoreClockUpdate(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - Chip_GPIO_Init(LPC_GPIO); - - // LED - Chip_GPIO_SetPinDIROutput(LPC_GPIO, LED_PORT, LED_PIN); - - // Button - Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); - - // UART - - //------------- USB -------------// - Chip_IOCON_SetPinMuxing(LPC_IOCON, pin_usb_mux, sizeof(pin_usb_mux) / sizeof(PINMUX_GRP_T)); - - // Port1 as Host, Port2: Device - Chip_USB_Init(); - - enum { - USBCLK_DEVCIE = 0x12, // AHB + Device - USBCLK_HOST = 0x19 , // AHB + OTG + Host - USBCLK_ALL = 0x1B // Host + Device + OTG + AHB - }; - - LPC_USB->OTGClkCtrl = USBCLK_ALL; - while ( (LPC_USB->OTGClkSt & USBCLK_ALL) != USBCLK_ALL ) {} - - // set portfunc: USB1 = host, USB2 = device - LPC_USB->StCtrl = 0x3; -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state); -} - -uint32_t board_button_read(void) -{ - // active low - return Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN) ? 0 : 1; -} - -int board_uart_read(uint8_t* buf, int len) -{ - //return UART_ReceiveByte(BOARD_UART_PORT); - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - //UART_Send(BOARD_UART_PORT, &c, 1, BLOCKING); - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif |