implement ADC functionality

1 files changed, 110 insertions, 7 deletions

diff --git a/watch-library/watch/watch_adc.c b/watch-library/watch/watch_adc.c
index ebb8bb60..4a7a44ff 100644
--- a/watch-library/watch/watch_adc.c
+++ b/watch-library/watch/watch_adc.c
@@ -22,24 +22,127 @@
  * SOFTWARE.
  */
 
- static bool ADC_0_ENABLED = false;
+void _watch_sync_adc() {
+    while (ADC->SYNCBUSY.reg);
+}
+
+uint16_t _watch_get_analog_value(uint16_t channel) {
+    if (ADC->INPUTCTRL.bit.MUXPOS != channel) {
+        ADC->INPUTCTRL.bit.MUXPOS = channel;
+        _watch_sync_adc();
+    }
+
+    ADC->SWTRIG.bit.START = 1;
+    while (!ADC->INTFLAG.bit.RESRDY);
+
+    return ADC->RESULT.reg;
+}
+
+void watch_enable_adc() {
+    MCLK->APBCMASK.reg |= MCLK_APBCMASK_ADC;
+    GCLK->PCHCTRL[ADC_GCLK_ID].reg = GCLK_PCHCTRL_GEN_GCLK0 | GCLK_PCHCTRL_CHEN;
+
+    uint16_t calib_reg = 0;
+    calib_reg = ADC_CALIB_BIASREFBUF((*(uint32_t *)ADC_FUSES_BIASREFBUF_ADDR >> ADC_FUSES_BIASREFBUF_Pos)) |
+                ADC_CALIB_BIASCOMP((*(uint32_t *)ADC_FUSES_BIASCOMP_ADDR >> ADC_FUSES_BIASCOMP_Pos));
 
-void watch_enable_analog(const uint8_t pin) {
-    if (!ADC_0_ENABLED) ADC_0_init();
-    ADC_0_ENABLED = true;
+    if (!ADC->SYNCBUSY.bit.SWRST) {
+        if (ADC->CTRLA.bit.ENABLE) {
+            ADC->CTRLA.bit.ENABLE = 0;
+            _watch_sync_adc();
+        }
+        ADC->CTRLA.bit.SWRST = 1;
+    }
+    _watch_sync_adc();
+
+    if (USB->DEVICE.CTRLA.bit.ENABLE) {
+        // if USB is enabled, we are running an 8 MHz clock.
+        // divide by 16 for a 500kHz ADC clock.
+        ADC->CTRLB.bit.PRESCALER = ADC_CTRLB_PRESCALER_DIV16_Val;
+    } else {
+        // otherwise it's 4 Mhz. divide by 8 for a 500kHz ADC clock.
+        ADC->CTRLB.bit.PRESCALER = ADC_CTRLB_PRESCALER_DIV8_Val;
+    }
+    ADC->CALIB.reg = calib_reg;
+    ADC->REFCTRL.bit.REFSEL = ADC_REFCTRL_REFSEL_INTVCC2_Val;
+    ADC->INPUTCTRL.bit.MUXNEG = ADC_INPUTCTRL_MUXNEG_GND_Val;
+    ADC->CTRLC.bit.RESSEL = ADC_CTRLC_RESSEL_16BIT_Val;
+    ADC->AVGCTRL.bit.SAMPLENUM = ADC_AVGCTRL_SAMPLENUM_16_Val;
+    ADC->SAMPCTRL.bit.SAMPLEN = 0;
+    ADC->INTENSET.reg = ADC_INTENSET_RESRDY;
+    ADC->CTRLA.bit.ENABLE = 1;
+    _watch_sync_adc();
+    // throw away one measurement after reference change (the channel doesn't matter).
+    _watch_get_analog_value(ADC_INPUTCTRL_MUXPOS_SCALEDCOREVCC);
+}
 
+void watch_enable_analog_input(const uint8_t pin) {
     gpio_set_pin_direction(pin, GPIO_DIRECTION_OFF);
     switch (pin) {
         case A0:
-            gpio_set_pin_function(A0, PINMUX_PB04B_ADC_AIN12);
+            gpio_set_pin_function(pin, PINMUX_PB04B_ADC_AIN12);
             break;
         case A1:
-            gpio_set_pin_function(A1, PINMUX_PB01B_ADC_AIN9);
+            gpio_set_pin_function(pin, PINMUX_PB01B_ADC_AIN9);
             break;
         case A2:
-            gpio_set_pin_function(A2, PINMUX_PB02B_ADC_AIN10);
+            gpio_set_pin_function(pin, PINMUX_PB02B_ADC_AIN10);
+            break;
+        case A3:
+            gpio_set_pin_function(pin, PINMUX_PB03B_ADC_AIN11);
+            break;
+        case A4:
+            gpio_set_pin_function(pin, PINMUX_PB00B_ADC_AIN8);
             break;
         default:
             return;
     }
 }
+
+uint16_t watch_get_analog_pin_level(const uint8_t pin) {
+    switch (pin) {
+        case A0:
+            return _watch_get_analog_value(ADC_INPUTCTRL_MUXPOS_AIN12_Val);
+        case A1:
+            return _watch_get_analog_value(ADC_INPUTCTRL_MUXPOS_AIN9_Val);
+        case A2:
+            return _watch_get_analog_value(ADC_INPUTCTRL_MUXPOS_AIN10_Val);
+        case A3:
+            return _watch_get_analog_value(ADC_INPUTCTRL_MUXPOS_AIN11_Val);
+        case A4:
+            return _watch_get_analog_value(ADC_INPUTCTRL_MUXPOS_AIN8_Val);
+        default:
+            return 0;
+    }
+}
+
+void watch_set_num_analog_samples(uint16_t samples) {
+    // ignore any input that's not a power of 2 (i.e. only one bit set)
+    if (__builtin_popcount(samples) != 1) return;
+    // if only one bit is set, counting the trailing zeroes is equivalent to log2(samples)
+    uint8_t sample_val = __builtin_ctz(samples);
+    // make sure the desired value is within range and set it, if so.
+    if (sample_val <= ADC_AVGCTRL_SAMPLENUM_1024_Val) {
+        ADC->AVGCTRL.bit.SAMPLENUM = sample_val;
+        _watch_sync_adc();
+    }
+}
+
+void watch_set_analog_sampling_length(uint8_t cycles) {
+    // for clarity the API asks the user how many cycles they want the measurement to take.
+    // but the ADC always needs at least one cycle; it just wants to know how many *extra* cycles we want.
+    // so we subtract one from the user-provided value, and clamp to the maximum.
+    ADC->SAMPCTRL.bit.SAMPLEN = (cycles - 1) & 0x3F;
+    _watch_sync_adc();
+}
+
+inline void watch_disable_analog_input(const uint8_t pin) {
+    gpio_set_pin_function(pin, GPIO_PIN_FUNCTION_OFF);
+}
+
+inline void watch_disable_adc() {
+    ADC->CTRLA.bit.ENABLE = 0;
+    _watch_sync_adc();
+
+    MCLK->APBCMASK.reg &= ~MCLK_APBCMASK_ADC;
+}