Sensor Watch Simulator (#35)

* Put something on screen

* Use the 32bit watch_date_time repr to pass from JS

* Implement periodic callbacks

* Clear display on enabling

* Hook up watch_set_led_color() to SVG (green-only)

* Make debug output full-width

* Remove default Emscripten canvas

* Implement sleep and button clicks

* Fix time zone conversion bug in beats-time app

* Clean up warnings

* Fix pin levels

* Set time zone to browser value (if available)

* Add basic backup data saving

* Silence format specifier warnings in both targets

* Remove unnecessary, copied files

* Use RTC pointer to clear callbacks (if available)

* Use preprocessor define to avoid hardcoding MOVEMENT_NUM_FACES

* Change each face to const preprocessor definition

* Remove Intl.DateTimeFormat usage

* Update shell.html title, header

* Add touch start/end event handlers on SVG buttons

* Update shell.html

* Update folder structure (shared, simulator, hardware under watch-library)

* Tease out shared components from watch_slcd

* Clean up simulator watch_slcd.c inline JS calls

* Fix missing newlines at end of file

* Add simulator warnings (except format, unused-paremter)

* Implement remaining watch_rtc functions

* Fix button bug on mouse down then drag out

* Implement remaining watch_slcd functions

* Link keyboard events to buttons (for keys A, L, M)

* Rewrite event handling (mouse, touch, keyboard) in C

* Set explicit text UTF-8 charset in shell.html

* Address PR comments

* Remove unused directories from include paths

1 files changed, 0 insertions, 185 deletions

diff --git a/watch-library/hal/include/hpl_gpio.h b/watch-library/hal/include/hpl_gpio.h
deleted file mode 100644
index 5cdd387b..00000000
--- a/watch-library/hal/include/hpl_gpio.h
+++ /dev/null
@@ -1,185 +0,0 @@
-/**
- * \file
- *
- * \brief Port related functionality declaration.
- *
- * Copyright (c) 2014-2018 Microchip Technology Inc. and its subsidiaries.
- *
- * \asf_license_start
- *
- * \page License
- *
- * Subject to your compliance with these terms, you may use Microchip
- * software and any derivatives exclusively with Microchip products.
- * It is your responsibility to comply with third party license terms applicable
- * to your use of third party software (including open source software) that
- * may accompany Microchip software.
- *
- * THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES,
- * WHETHER EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE,
- * INCLUDING ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY,
- * AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL MICROCHIP BE
- * LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL
- * LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND WHATSOEVER RELATED TO THE
- * SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS BEEN ADVISED OF THE
- * POSSIBILITY OR THE DAMAGES ARE FORESEEABLE.  TO THE FULLEST EXTENT
- * ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL CLAIMS IN ANY WAY
- * RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT OF FEES, IF ANY,
- * THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS SOFTWARE.
- *
- * \asf_license_stop
- *
- */
-
-#ifndef _HPL_GPIO_H_INCLUDED
-#define _HPL_GPIO_H_INCLUDED
-
-/**
- * \addtogroup HPL Port
- *
- * \section hpl_port_rev Revision History
- * - v1.0.0 Initial Release
- *
- *@{
- */
-
-#include <compiler.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-/**
- * \brief Macros for the pin and port group, lower 5
- * bits stands for pin number in the group, higher 3
- * bits stands for port group
- */
-#define GPIO_PIN(n) (((n)&0x1Fu) << 0)
-#define GPIO_PORT(n) ((n) >> 5)
-#define GPIO(port, pin) ((((port)&0x7u) << 5) + ((pin)&0x1Fu))
-#define GPIO_PIN_FUNCTION_OFF 0xffffffff
-
-/**
- * \brief PORT pull mode settings
- */
-enum gpio_pull_mode { GPIO_PULL_OFF, GPIO_PULL_UP, GPIO_PULL_DOWN };
-
-/**
- * \brief PORT direction settins
- */
-enum gpio_direction { GPIO_DIRECTION_OFF, GPIO_DIRECTION_IN, GPIO_DIRECTION_OUT };
-
-/**
- * \brief PORT group abstraction
- */
-
-enum gpio_port { GPIO_PORTA, GPIO_PORTB, GPIO_PORTC, GPIO_PORTD, GPIO_PORTE };
-
-/**
- * \name HPL functions
- */
-//@{
-/**
- * \brief Port initialization function
- *
- * Port initialization function should setup the port module based
- * on a static configuration file, this function should normally
- * not be called directly, but is a part of hal_init()
- */
-void _gpio_init(void);
-
-/**
- * \brief Set direction on port with mask
- *
- * Set data direction for each pin, or disable the pin
- *
- * \param[in] port      Ports are grouped into groups of maximum 32 pins,
- *                      GPIO_PORTA = group 0, GPIO_PORTB = group 1, etc
- * \param[in] mask      Bit mask where 1 means apply direction setting to the
- *                      corresponding pin
- * \param[in] direction GPIO_DIRECTION_OFF  = set pin direction to input
- *                      and disable input buffer to disable the pin
- *                      GPIO_DIRECTION_IN   = set pin direction to input
- *                      and enable input buffer to enable the pin
- *                      GPIO_DIRECTION_OUT  = set pin direction to output
- *                      and disable input buffer
- */
-static inline void _gpio_set_direction(const enum gpio_port port, const uint32_t mask,
-                                       const enum gpio_direction direction);
-
-/**
- * \brief Set output level on port with mask
- *
- * Sets output state on pin to high or low with pin masking
- *
- * \param[in] port  Ports are grouped into groups of maximum 32 pins,
- *                  GPIO_PORTA = group 0, GPIO_PORTB = group 1, etc
- * \param[in] mask  Bit mask where 1 means apply direction setting to
- *                  the corresponding pin
- * \param[in] level true  = pin level is set to 1
- *                  false = pin level is set to 0
- */
-static inline void _gpio_set_level(const enum gpio_port port, const uint32_t mask, const bool level);
-
-/**
- * \brief Change output level to the opposite with mask
- *
- * Change pin output level to the opposite with pin masking
- *
- * \param[in] port  Ports are grouped into groups of maximum 32 pins,
- *                  GPIO_PORTA = group 0, GPIO_PORTB = group 1, etc
- * \param[in] mask  Bit mask where 1 means apply direction setting to
- *                  the corresponding pin
- */
-static inline void _gpio_toggle_level(const enum gpio_port port, const uint32_t mask);
-
-/**
- * \brief Get input levels on all port pins
- *
- * Get input level on all port pins, will read IN register if configured to
- * input and OUT register if configured as output
- *
- * \param[in] port  Ports are grouped into groups of maximum 32 pins,
- *                  GPIO_PORTA = group 0, GPIO_PORTB = group 1, etc
- */
-static inline uint32_t _gpio_get_level(const enum gpio_port port);
-
-/**
- * \brief Set pin pull mode
- *
- * Set pull mode on a single pin
- *
- * \notice This function will automatically change pin direction to input
- *
- * \param[in] port      Ports are grouped into groups of maximum 32 pins,
- *                      GPIO_PORTA = group 0, GPIO_PORTB = group 1, etc
- * \param[in] pin       The pin in the group that pull mode should be selected
- *                      for
- * \param[in] pull_mode GPIO_PULL_OFF  = pull resistor on pin is disabled
- *                      GPIO_PULL_DOWN = pull resistor on pin will pull pin
- *                      level to ground level
- *                      GPIO_PULL_UP   = pull resistor on pin will pull pin
- *                      level to VCC
- */
-static inline void _gpio_set_pin_pull_mode(const enum gpio_port port, const uint8_t pin,
-                                           const enum gpio_pull_mode pull_mode);
-
-/**
- * \brief Set gpio function
- *
- * Select which function a gpio is used for
- *
- * \param[in] gpio     The gpio to set function for
- * \param[in] function The gpio function is given by a 32-bit wide bitfield
- *                     found in the header files for the device
- *
- */
-static inline void _gpio_set_pin_function(const uint32_t gpio, const uint32_t function);
-
-#include <hpl_gpio_base.h>
-//@}
-
-#ifdef __cplusplus
-}
-#endif
-/**@}*/
-#endif /* _HPL_GPIO_H_INCLUDED */