Sensor Watch Simulator (#35)

* Put something on screen

* Use the 32bit watch_date_time repr to pass from JS

* Implement periodic callbacks

* Clear display on enabling

* Hook up watch_set_led_color() to SVG (green-only)

* Make debug output full-width

* Remove default Emscripten canvas

* Implement sleep and button clicks

* Fix time zone conversion bug in beats-time app

* Clean up warnings

* Fix pin levels

* Set time zone to browser value (if available)

* Add basic backup data saving

* Silence format specifier warnings in both targets

* Remove unnecessary, copied files

* Use RTC pointer to clear callbacks (if available)

* Use preprocessor define to avoid hardcoding MOVEMENT_NUM_FACES

* Change each face to const preprocessor definition

* Remove Intl.DateTimeFormat usage

* Update shell.html title, header

* Add touch start/end event handlers on SVG buttons

* Update shell.html

* Update folder structure (shared, simulator, hardware under watch-library)

* Tease out shared components from watch_slcd

* Clean up simulator watch_slcd.c inline JS calls

* Fix missing newlines at end of file

* Add simulator warnings (except format, unused-paremter)

* Implement remaining watch_rtc functions

* Fix button bug on mouse down then drag out

* Implement remaining watch_slcd functions

* Link keyboard events to buttons (for keys A, L, M)

* Rewrite event handling (mouse, touch, keyboard) in C

* Set explicit text UTF-8 charset in shell.html

* Address PR comments

* Remove unused directories from include paths

1 files changed, 0 insertions, 201 deletions

diff --git a/watch-library/hal/include/hal_gpio.h b/watch-library/hal/include/hal_gpio.h
deleted file mode 100644
index fbfa2d4a..00000000
--- a/watch-library/hal/include/hal_gpio.h
+++ /dev/null
@@ -1,201 +0,0 @@
-/**
- * \file
- *
- * \brief Port
- *
- * Copyright (c) 2014-2018 Microchip Technology Inc. and its subsidiaries.
- *
- * \asf_license_start
- *
- * \page License
- *
- * Subject to your compliance with these terms, you may use Microchip
- * software and any derivatives exclusively with Microchip products.
- * It is your responsibility to comply with third party license terms applicable
- * to your use of third party software (including open source software) that
- * may accompany Microchip software.
- *
- * THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES,
- * WHETHER EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE,
- * INCLUDING ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY,
- * AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL MICROCHIP BE
- * LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL
- * LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND WHATSOEVER RELATED TO THE
- * SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS BEEN ADVISED OF THE
- * POSSIBILITY OR THE DAMAGES ARE FORESEEABLE.  TO THE FULLEST EXTENT
- * ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL CLAIMS IN ANY WAY
- * RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT OF FEES, IF ANY,
- * THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS SOFTWARE.
- *
- * \asf_license_stop
- */
-#ifndef _HAL_GPIO_INCLUDED_
-#define _HAL_GPIO_INCLUDED_
-
-#include <hpl_gpio.h>
-#include <utils_assert.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * \brief Set gpio pull mode
- *
- * Set pin pull mode, non existing pull modes throws an fatal assert
- *
- * \param[in] pin       The pin number for device
- * \param[in] pull_mode GPIO_PULL_DOWN = Pull pin low with internal resistor
- *                      GPIO_PULL_UP   = Pull pin high with internal resistor
- *                      GPIO_PULL_OFF  = Disable pin pull mode
- */
-static inline void gpio_set_pin_pull_mode(const uint8_t pin, const enum gpio_pull_mode pull_mode)
-{
-	_gpio_set_pin_pull_mode((enum gpio_port)GPIO_PORT(pin), pin & 0x1F, pull_mode);
-}
-
-/**
- * \brief Set pin function
- *
- * Select which function a pin will be used for
- *
- * \param[in] pin       The pin number for device
- * \param[in] function  The pin function is given by a 32-bit wide bitfield
- *                      found in the header files for the device
- *
- */
-static inline void gpio_set_pin_function(const uint32_t pin, uint32_t function)
-{
-	_gpio_set_pin_function(pin, function);
-}
-
-/**
- * \brief Set port data direction
- *
- * Select if the pin data direction is input, output or disabled.
- * If disabled state is not possible, this function throws an assert.
- *
- * \param[in] port      Ports are grouped into groups of maximum 32 pins,
- *                      GPIO_PORTA = group 0, GPIO_PORTB = group 1, etc
- * \param[in] mask      Bit mask where 1 means apply direction setting to the
- *                      corresponding pin
- * \param[in] direction GPIO_DIRECTION_IN  = Data direction in
- *                      GPIO_DIRECTION_OUT = Data direction out
- *                      GPIO_DIRECTION_OFF = Disables the pin
- *                      (low power state)
- */
-static inline void gpio_set_port_direction(const enum gpio_port port, const uint32_t mask,
-                                           const enum gpio_direction direction)
-{
-	_gpio_set_direction(port, mask, direction);
-}
-
-/**
- * \brief Set gpio data direction
- *
- * Select if the pin data direction is input, output or disabled.
- * If disabled state is not possible, this function throws an assert.
- *
- * \param[in] pin       The pin number for device
- * \param[in] direction GPIO_DIRECTION_IN  = Data direction in
- *                      GPIO_DIRECTION_OUT = Data direction out
- *                      GPIO_DIRECTION_OFF = Disables the pin
- *                      (low power state)
- */
-static inline void gpio_set_pin_direction(const uint8_t pin, const enum gpio_direction direction)
-{
-	_gpio_set_direction((enum gpio_port)GPIO_PORT(pin), 1U << GPIO_PIN(pin), direction);
-}
-
-/**
- * \brief Set port level
- *
- * Sets output level on the pins defined by the bit mask
- *
- * \param[in] port  Ports are grouped into groups of maximum 32 pins,
- *                  GPIO_PORTA = group 0, GPIO_PORTB = group 1, etc
- * \param[in] mask  Bit mask where 1 means apply port level to the corresponding
- *                  pin
- * \param[in] level true  = Pin levels set to "high" state
- *                  false = Pin levels set to "low" state
- */
-static inline void gpio_set_port_level(const enum gpio_port port, const uint32_t mask, const bool level)
-{
-	_gpio_set_level(port, mask, level);
-}
-
-/**
- * \brief Set gpio level
- *
- * Sets output level on a pin
- *
- * \param[in] pin       The pin number for device
- * \param[in] level true  = Pin level set to "high" state
- *                  false = Pin level set to "low" state
- */
-static inline void gpio_set_pin_level(const uint8_t pin, const bool level)
-{
-	_gpio_set_level((enum gpio_port)GPIO_PORT(pin), 1U << GPIO_PIN(pin), level);
-}
-
-/**
- * \brief Toggle out level on pins
- *
- * Toggle the pin levels on pins defined by bit mask
- *
- * \param[in] port  Ports are grouped into groups of maximum 32 pins,
- *                  GPIO_PORTA = group 0, GPIO_PORTB = group 1, etc
- * \param[in] mask  Bit mask where 1 means toggle pin level to the corresponding
- *                  pin
- */
-static inline void gpio_toggle_port_level(const enum gpio_port port, const uint32_t mask)
-{
-	_gpio_toggle_level(port, mask);
-}
-
-/**
- * \brief Toggle output level on pin
- *
- * Toggle the pin levels on pins defined by bit mask
- *
- * \param[in] pin       The pin number for device
- */
-static inline void gpio_toggle_pin_level(const uint8_t pin)
-{
-	_gpio_toggle_level((enum gpio_port)GPIO_PORT(pin), 1U << GPIO_PIN(pin));
-}
-
-/**
- * \brief Get input level on pins
- *
- * Read the input level on pins connected to a port
- *
- * \param[in] port  Ports are grouped into groups of maximum 32 pins,
- *                  GPIO_PORTA = group 0, GPIO_PORTB = group 1, etc
- */
-static inline uint32_t gpio_get_port_level(const enum gpio_port port)
-{
-	return _gpio_get_level(port);
-}
-
-/**
- * \brief Get level on pin
- *
- * Reads the level on pins connected to a port
- *
- * \param[in] pin       The pin number for device
- */
-static inline bool gpio_get_pin_level(const uint8_t pin)
-{
-	return (bool)(_gpio_get_level((enum gpio_port)GPIO_PORT(pin)) & (0x01U << GPIO_PIN(pin)));
-}
-/**
- * \brief Get current driver version
- */
-uint32_t gpio_get_version(void);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif