remove tinyusb directory

1 files changed, 0 insertions, 53 deletions

diff --git a/tinyusb/hw/bsp/stm32l0538disco/board.mk b/tinyusb/hw/bsp/stm32l0538disco/board.mk
deleted file mode 100755
index c46887f1..00000000
--- a/tinyusb/hw/bsp/stm32l0538disco/board.mk
+++ /dev/null
@@ -1,53 +0,0 @@
-ST_FAMILY = l0
-DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver
-
-ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY)
-ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver
-
-CFLAGS += \
-  -flto \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m0plus \
-  -mfloat-abi=soft \
-  -nostdlib -nostartfiles \
-  -DSTM32L053xx \
-  -DCFG_EXAMPLE_MSC_READONLY \
-  -DCFG_TUSB_MCU=OPT_MCU_STM32L0
-
-# mcu driver cause following warnings
-CFLAGS += -Wno-error=unused-parameter -Wno-error=maybe-uninitialized
-
-# All source paths should be relative to the top level.
-LD_FILE = hw/bsp/$(BOARD)/STM32L053C8Tx_FLASH.ld
-
-SRC_C += \
-  src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \
-  $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \
-  $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \
-  $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \
-  $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \
-  $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \
-  $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c
-
-SRC_S += \
-  $(ST_CMSIS)/Source/Templates/gcc/startup_stm32l053xx.s
-
-INC += \
-  $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \
-  $(TOP)/$(ST_CMSIS)/Include \
-  $(TOP)/$(ST_HAL_DRIVER)/Inc \
-  $(TOP)/hw/bsp/$(BOARD)
-
-# For freeRTOS port source
-FREERTOS_PORT = ARM_CM0
-
-# For flash-jlink target
-JLINK_DEVICE = STM32L053R8
-
-# Path to STM32 Cube Programmer CLI, should be added into system path 
-STM32Prog = STM32_Programmer_CLI
-
-# flash target using on-board stlink
-flash: $(BUILD)/$(PROJECT).elf
-	$(STM32Prog) --connect port=swd --write $< --go