diff options
| author | Joey Castillo <jose.castillo@gmail.com> | 2021-09-21 15:49:02 -0400 |
|---|---|---|
| committer | Joey Castillo <jose.castillo@gmail.com> | 2021-09-21 15:50:43 -0400 |
| commit | fd5e8046d0b328578b209a8e51d53f62cbdfdd06 (patch) | |
| tree | 3d2ddd446a1a5cdb082f91ccbe1e8cf1fea719b4 /boards/OSO-MISC-21-013 | |
| parent | 63322a3b7f7f5d5534fbd933576c7fcf69103afb (diff) | |
| download | Sensor-Watch-fd5e8046d0b328578b209a8e51d53f62cbdfdd06.tar.gz Sensor-Watch-fd5e8046d0b328578b209a8e51d53f62cbdfdd06.tar.bz2 Sensor-Watch-fd5e8046d0b328578b209a8e51d53f62cbdfdd06.zip | |
support alternate LCD pinouts
Diffstat (limited to 'boards/OSO-MISC-21-013')
| -rw-r--r-- | boards/OSO-MISC-21-013/pins.h | 36 |
1 files changed, 36 insertions, 0 deletions
diff --git a/boards/OSO-MISC-21-013/pins.h b/boards/OSO-MISC-21-013/pins.h index 66e4bdc2..a4e936a4 100644 --- a/boards/OSO-MISC-21-013/pins.h +++ b/boards/OSO-MISC-21-013/pins.h @@ -62,6 +62,42 @@ #define SLCD24 GPIO(GPIO_PORTA, 21) #define SLCD25 GPIO(GPIO_PORTA, 22) #define SLCD26 GPIO(GPIO_PORTA, 23) +// This board uses a slightly different pin mapping from the standard watch, and it's not enough to +// just declare the pins. We also have to set the LCD Pin Enable register with the SLCD pins we're +// using. These numbers are not port/pin numbers, but the "SLCD/LP[x]" numbers in the pinmux table. +// If not defined in pins.h, the LCD drover will fall back to the pin mapping in hpl_slcd_config.h. +// LPENL is for pins SLCD/LP[0..31]. +#define CONF_SLCD_LPENL (\ + (uint32_t)1 << 0 | \ + (uint32_t)1 << 1 | \ + (uint32_t)1 << 2 | \ + (uint32_t)1 << 3 | \ + (uint32_t)1 << 5 | \ + (uint32_t)1 << 6 | \ + (uint32_t)1 << 11 | \ + (uint32_t)1 << 12 | \ + (uint32_t)1 << 13 | \ + (uint32_t)1 << 14 | \ + (uint32_t)1 << 21 | \ + (uint32_t)1 << 22 | \ + (uint32_t)1 << 23 | \ + (uint32_t)1 << 24 | \ + (uint32_t)1 << 25 | \ + (uint32_t)1 << 30 | \ + (uint32_t)1 << 31 | 0) +// LPENH is for pins SLCD/LP[32..51], where bit 0 represents pin 32. +#define CONF_SLCD_LPENH (\ + (uint32_t)1 << (32 - 32) | \ + (uint32_t)1 << (33 - 32) | \ + (uint32_t)1 << (34 - 32) | \ + (uint32_t)1 << (35 - 32) | \ + (uint32_t)1 << (42 - 32) | \ + (uint32_t)1 << (43 - 32) | \ + (uint32_t)1 << (48 - 32) | \ + (uint32_t)1 << (49 - 32) | \ + (uint32_t)1 << (50 - 32) | \ + (uint32_t)1 << (51 - 32) | 0) + // 9-pin connector #define A0 GPIO(GPIO_PORTB, 4) |