1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
|
From efe391a3614b98a0f84fd49e63b4009185ff9a1a Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 2 May 2013 23:29:08 +0200
Subject: [PATCH 160/164] USB: phy: add ralink SoC driver
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/usb/phy/Kconfig | 8 ++
drivers/usb/phy/Makefile | 1 +
drivers/usb/phy/ralink-phy.c | 191 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 200 insertions(+)
create mode 100644 drivers/usb/phy/ralink-phy.c
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 9054938..b197c70 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -74,3 +74,11 @@ config SAMSUNG_USBPHY
help
Enable this to support Samsung USB phy controller for samsung
SoCs.
+
+config RALINK_USBPHY
+ bool "Ralink USB PHY controller Driver"
+ depends on MIPS && RALINK
+ select USB_OTG_UTILS
+ help
+ Enable this to support ralink USB phy controller for ralink
+ SoCs.
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index b13faa1..2df30f1 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -12,3 +12,4 @@ obj-$(CONFIG_MV_U3D_PHY) += mv_u3d_phy.o
obj-$(CONFIG_USB_EHCI_TEGRA) += tegra_usb_phy.o
obj-$(CONFIG_USB_RCAR_PHY) += rcar-phy.o
obj-$(CONFIG_SAMSUNG_USBPHY) += samsung-usbphy.o
+obj-$(CONFIG_RALINK_USBPHY) += ralink-phy.o
diff --git a/drivers/usb/phy/ralink-phy.c b/drivers/usb/phy/ralink-phy.c
new file mode 100644
index 0000000..3fbabea
--- /dev/null
+++ b/drivers/usb/phy/ralink-phy.c
@@ -0,0 +1,191 @@
+/*
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ *
+ * based on: Renesas R-Car USB phy driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/usb/otg.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/reset.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#define RT_SYSC_REG_SYSCFG1 0x014
+#define RT_SYSC_REG_CLKCFG1 0x030
+#define RT_SYSC_REG_USB_PHY_CFG 0x05c
+
+#define RT_RSTCTRL_UDEV BIT(25)
+#define RT_RSTCTRL_UHST BIT(22)
+#define RT_SYSCFG1_USB0_HOST_MODE BIT(10)
+
+#define MT7620_CLKCFG1_UPHY0_CLK_EN BIT(25)
+#define RT_CLKCFG1_UPHY1_CLK_EN BIT(20)
+#define RT_CLKCFG1_UPHY0_CLK_EN BIT(18)
+
+#define USB_PHY_UTMI_8B60M BIT(1)
+#define UDEV_WAKEUP BIT(0)
+
+static atomic_t usb_pwr_ref = ATOMIC_INIT(0);
+static struct reset_control *rstdev;
+static struct reset_control *rsthost;
+static u32 phy_clk;
+
+static void usb_phy_enable(int state)
+{
+ if (state)
+ rt_sysc_m32(0, phy_clk, RT_SYSC_REG_CLKCFG1);
+ else
+ rt_sysc_m32(phy_clk, 0, RT_SYSC_REG_CLKCFG1);
+ mdelay(100);
+}
+
+static int usb_power_on(struct usb_phy *phy)
+{
+ if (atomic_inc_return(&usb_pwr_ref) == 1) {
+ u32 t;
+
+ usb_phy_enable(1);
+
+ reset_control_assert(rstdev);
+ reset_control_assert(rsthost);
+
+ if (OTG_STATE_B_HOST) {
+ rt_sysc_m32(0, RT_SYSCFG1_USB0_HOST_MODE, RT_SYSC_REG_SYSCFG1);
+ reset_control_deassert(rsthost);
+ } else {
+ rt_sysc_m32(RT_SYSCFG1_USB0_HOST_MODE, 0, RT_SYSC_REG_SYSCFG1);
+ reset_control_deassert(rstdev);
+ }
+ mdelay(100);
+
+ t = rt_sysc_r32(RT_SYSC_REG_USB_PHY_CFG);
+ dev_info(phy->dev, "remote usb device wakeup %s\n",
+ (t & UDEV_WAKEUP) ? ("enabbled") : ("disabled"));
+ if (t & USB_PHY_UTMI_8B60M)
+ dev_info(phy->dev, "UTMI 8bit 60MHz\n");
+ else
+ dev_info(phy->dev, "UTMI 16bit 30MHz\n");
+ }
+
+ return 0;
+}
+
+static void usb_power_off(struct usb_phy *phy)
+{
+ if (atomic_dec_return(&usb_pwr_ref) == 0) {
+ usb_phy_enable(0);
+ reset_control_assert(rstdev);
+ reset_control_assert(rsthost);
+ }
+}
+
+static int usb_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+ otg->gadget = NULL;
+ otg->host = host;
+
+ return 0;
+}
+
+static int usb_set_peripheral(struct usb_otg *otg,
+ struct usb_gadget *gadget)
+{
+ otg->host = NULL;
+ otg->gadget = gadget;
+
+ return 0;
+}
+
+static const struct of_device_id ralink_usbphy_dt_match[] = {
+ { .compatible = "ralink,rt3xxx-usbphy", .data = (void *) (RT_CLKCFG1_UPHY1_CLK_EN | RT_CLKCFG1_UPHY0_CLK_EN) },
+ { .compatible = "ralink,mt7620a-usbphy", .data = (void *) MT7620_CLKCFG1_UPHY0_CLK_EN },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ralink_usbphy_dt_match);
+
+static int usb_phy_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ struct device *dev = &pdev->dev;
+ struct usb_otg *otg;
+ struct usb_phy *phy;
+ int ret;
+
+ match = of_match_device(ralink_usbphy_dt_match, &pdev->dev);
+ phy_clk = (int) match->data;
+
+ rsthost = devm_reset_control_get(&pdev->dev, "host");
+ if (IS_ERR(rsthost))
+ return PTR_ERR(rsthost);
+
+ rstdev = devm_reset_control_get(&pdev->dev, "device");
+ if (IS_ERR(rstdev))
+ return PTR_ERR(rstdev);
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy) {
+ dev_err(&pdev->dev, "unable to allocate memory for USB PHY\n");
+ return -ENOMEM;
+ }
+
+ otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
+ if (!otg) {
+ dev_err(&pdev->dev, "unable to allocate memory for USB OTG\n");
+ return -ENOMEM;
+ }
+
+ phy->dev = dev;
+ phy->label = dev_name(dev);
+ phy->init = usb_power_on;
+ phy->shutdown = usb_power_off;
+ otg->set_host = usb_set_host;
+ otg->set_peripheral = usb_set_peripheral;
+ otg->phy = phy;
+ phy->otg = otg;
+ ret = usb_add_phy(phy, USB_PHY_TYPE_USB2);
+
+ if (ret < 0) {
+ dev_err(dev, "usb phy addition error\n");
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, phy);
+
+ dev_info(&pdev->dev, "loaded\n");
+
+ return ret;
+}
+
+static int usb_phy_remove(struct platform_device *pdev)
+{
+ struct usb_phy *phy = platform_get_drvdata(pdev);
+
+ usb_remove_phy(phy);
+
+ return 0;
+}
+
+static struct platform_driver usb_phy_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "rt3xxx-usbphy",
+ .of_match_table = of_match_ptr(ralink_usbphy_dt_match),
+ },
+ .probe = usb_phy_probe,
+ .remove = usb_phy_remove,
+};
+
+module_platform_driver(usb_phy_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Ralink USB phy");
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
--
1.7.10.4
|
