1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
|
From 2551dc9e398c37a15e52122d385c29a8b06be45f Mon Sep 17 00:00:00 2001
From: Maxime Chevallier <maxime.chevallier@bootlin.com>
Date: Fri, 26 Nov 2021 12:20:56 +0100
Subject: net: mvneta: Add TC traffic shaping offload
The mvneta controller is able to do some tocken-bucket per-queue traffic
shaping. This commit adds support for setting these using the TC mqprio
interface.
The token-bucket parameters are customisable, but the current
implementation configures them to have a 10kbps resolution for the
rate limitation, since it allows to cover the whole range of max_rate
values from 10kbps to 5Gbps with 10kbps increments.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/marvell/mvneta.c | 120 +++++++++++++++++++++++++++++++++-
1 file changed, 119 insertions(+), 1 deletion(-)
(limited to 'drivers/net/ethernet/marvell/mvneta.c')
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -248,12 +248,39 @@
#define MVNETA_TXQ_SENT_DESC_MASK 0x3fff0000
#define MVNETA_PORT_TX_RESET 0x3cf0
#define MVNETA_PORT_TX_DMA_RESET BIT(0)
+#define MVNETA_TXQ_CMD1_REG 0x3e00
+#define MVNETA_TXQ_CMD1_BW_LIM_SEL_V1 BIT(3)
+#define MVNETA_TXQ_CMD1_BW_LIM_EN BIT(0)
+#define MVNETA_REFILL_NUM_CLK_REG 0x3e08
+#define MVNETA_REFILL_MAX_NUM_CLK 0x0000ffff
#define MVNETA_TX_MTU 0x3e0c
#define MVNETA_TX_TOKEN_SIZE 0x3e14
#define MVNETA_TX_TOKEN_SIZE_MAX 0xffffffff
+#define MVNETA_TXQ_BUCKET_REFILL_REG(q) (0x3e20 + ((q) << 2))
+#define MVNETA_TXQ_BUCKET_REFILL_PERIOD_MASK 0x3ff00000
+#define MVNETA_TXQ_BUCKET_REFILL_PERIOD_SHIFT 20
+#define MVNETA_TXQ_BUCKET_REFILL_VALUE_MAX 0x0007ffff
#define MVNETA_TXQ_TOKEN_SIZE_REG(q) (0x3e40 + ((q) << 2))
#define MVNETA_TXQ_TOKEN_SIZE_MAX 0x7fffffff
+/* The values of the bucket refill base period and refill period are taken from
+ * the reference manual, and adds up to a base resolution of 10Kbps. This allows
+ * to cover all rate-limit values from 10Kbps up to 5Gbps
+ */
+
+/* Base period for the rate limit algorithm */
+#define MVNETA_TXQ_BUCKET_REFILL_BASE_PERIOD_NS 100
+
+/* Number of Base Period to wait between each bucket refill */
+#define MVNETA_TXQ_BUCKET_REFILL_PERIOD 1000
+
+/* The base resolution for rate limiting, in bps. Any max_rate value should be
+ * a multiple of that value.
+ */
+#define MVNETA_TXQ_RATE_LIMIT_RESOLUTION (NSEC_PER_SEC / \
+ (MVNETA_TXQ_BUCKET_REFILL_BASE_PERIOD_NS * \
+ MVNETA_TXQ_BUCKET_REFILL_PERIOD))
+
#define MVNETA_LPI_CTRL_0 0x2cc0
#define MVNETA_LPI_CTRL_1 0x2cc4
#define MVNETA_LPI_REQUEST_ENABLE BIT(0)
@@ -4945,11 +4972,74 @@ static void mvneta_map_vlan_prio_to_rxq(
mvreg_write(pp, MVNETA_VLAN_PRIO_TO_RXQ, val);
}
+static int mvneta_enable_per_queue_rate_limit(struct mvneta_port *pp)
+{
+ unsigned long core_clk_rate;
+ u32 refill_cycles;
+ u32 val;
+
+ core_clk_rate = clk_get_rate(pp->clk);
+ if (!core_clk_rate)
+ return -EINVAL;
+
+ refill_cycles = MVNETA_TXQ_BUCKET_REFILL_BASE_PERIOD_NS /
+ (NSEC_PER_SEC / core_clk_rate);
+
+ if (refill_cycles > MVNETA_REFILL_MAX_NUM_CLK)
+ return -EINVAL;
+
+ /* Enable bw limit algorithm version 3 */
+ val = mvreg_read(pp, MVNETA_TXQ_CMD1_REG);
+ val &= ~(MVNETA_TXQ_CMD1_BW_LIM_SEL_V1 | MVNETA_TXQ_CMD1_BW_LIM_EN);
+ mvreg_write(pp, MVNETA_TXQ_CMD1_REG, val);
+
+ /* Set the base refill rate */
+ mvreg_write(pp, MVNETA_REFILL_NUM_CLK_REG, refill_cycles);
+
+ return 0;
+}
+
+static void mvneta_disable_per_queue_rate_limit(struct mvneta_port *pp)
+{
+ u32 val = mvreg_read(pp, MVNETA_TXQ_CMD1_REG);
+
+ val |= (MVNETA_TXQ_CMD1_BW_LIM_SEL_V1 | MVNETA_TXQ_CMD1_BW_LIM_EN);
+ mvreg_write(pp, MVNETA_TXQ_CMD1_REG, val);
+}
+
+static int mvneta_setup_queue_rates(struct mvneta_port *pp, int queue,
+ u64 min_rate, u64 max_rate)
+{
+ u32 refill_val, rem;
+ u32 val = 0;
+
+ /* Convert to from Bps to bps */
+ max_rate *= 8;
+
+ if (min_rate)
+ return -EINVAL;
+
+ refill_val = div_u64_rem(max_rate, MVNETA_TXQ_RATE_LIMIT_RESOLUTION,
+ &rem);
+
+ if (rem || !refill_val ||
+ refill_val > MVNETA_TXQ_BUCKET_REFILL_VALUE_MAX)
+ return -EINVAL;
+
+ val = refill_val;
+ val |= (MVNETA_TXQ_BUCKET_REFILL_PERIOD <<
+ MVNETA_TXQ_BUCKET_REFILL_PERIOD_SHIFT);
+
+ mvreg_write(pp, MVNETA_TXQ_BUCKET_REFILL_REG(queue), val);
+
+ return 0;
+}
+
static int mvneta_setup_mqprio(struct net_device *dev,
struct tc_mqprio_qopt_offload *mqprio)
{
struct mvneta_port *pp = netdev_priv(dev);
- int rxq, tc;
+ int rxq, txq, tc, ret;
u8 num_tc;
if (mqprio->qopt.hw != TC_MQPRIO_HW_OFFLOAD_TCS)
@@ -4963,6 +5053,7 @@ static int mvneta_setup_mqprio(struct ne
mvneta_clear_rx_prio_map(pp);
if (!num_tc) {
+ mvneta_disable_per_queue_rate_limit(pp);
netdev_reset_tc(dev);
return 0;
}
@@ -4983,6 +5074,33 @@ static int mvneta_setup_mqprio(struct ne
}
}
+ if (mqprio->shaper != TC_MQPRIO_SHAPER_BW_RATE) {
+ mvneta_disable_per_queue_rate_limit(pp);
+ return 0;
+ }
+
+ if (mqprio->qopt.num_tc > txq_number)
+ return -EINVAL;
+
+ ret = mvneta_enable_per_queue_rate_limit(pp);
+ if (ret)
+ return ret;
+
+ for (tc = 0; tc < mqprio->qopt.num_tc; tc++) {
+ for (txq = mqprio->qopt.offset[tc];
+ txq < mqprio->qopt.count[tc] + mqprio->qopt.offset[tc];
+ txq++) {
+ if (txq >= txq_number)
+ return -EINVAL;
+
+ ret = mvneta_setup_queue_rates(pp, txq,
+ mqprio->min_rate[tc],
+ mqprio->max_rate[tc]);
+ if (ret)
+ return ret;
+ }
+ }
+
return 0;
}
|
