1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
|
From 6c4efe83a0acf6f06c89ae17b885fa5739eb5be7 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Mon, 2 Dec 2019 18:20:22 +0000
Subject: [PATCH 4/4] net: sfp: re-attempt probing for phy
Some 1000BASE-T PHY modules take a while for the PHY to wake up.
Retry the probe a number of times before deciding that the module has
no PHY.
Tested with:
Sourcephotonics SPGBTXCNFC - PHY takes less than 50ms to respond.
Champion One 1000SFPT - PHY takes about 200ms to respond.
Mikrotik S-RJ01 - no PHY
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/sfp.c | 59 ++++++++++++++++++++++++++++++++++++---------------
1 file changed, 42 insertions(+), 17 deletions(-)
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -62,6 +62,7 @@ enum {
SFP_S_FAIL,
SFP_S_WAIT,
SFP_S_INIT,
+ SFP_S_INIT_PHY,
SFP_S_INIT_TX_FAULT,
SFP_S_WAIT_LOS,
SFP_S_LINK_UP,
@@ -126,6 +127,7 @@ static const char * const sm_state_strin
[SFP_S_FAIL] = "fail",
[SFP_S_WAIT] = "wait",
[SFP_S_INIT] = "init",
+ [SFP_S_INIT_PHY] = "init_phy",
[SFP_S_INIT_TX_FAULT] = "init_tx_fault",
[SFP_S_WAIT_LOS] = "wait_los",
[SFP_S_LINK_UP] = "link_up",
@@ -180,6 +182,12 @@ static const enum gpiod_flags gpio_flags
#define N_FAULT_INIT 5
#define N_FAULT 5
+/* T_PHY_RETRY is the time interval between attempts to probe the PHY.
+ * R_PHY_RETRY is the number of attempts.
+ */
+#define T_PHY_RETRY msecs_to_jiffies(50)
+#define R_PHY_RETRY 12
+
/* SFP module presence detection is poor: the three MOD DEF signals are
* the same length on the PCB, which means it's possible for MOD DEF 0 to
* connect before the I2C bus on MOD DEF 1/2.
@@ -236,6 +244,7 @@ struct sfp {
unsigned char sm_dev_state;
unsigned short sm_state;
unsigned char sm_fault_retries;
+ unsigned char sm_phy_retries;
struct sfp_eeprom_id id;
unsigned int module_power_mW;
@@ -1432,10 +1441,8 @@ static int sfp_sm_probe_phy(struct sfp *
int err;
phy = get_phy_device(sfp->i2c_mii, SFP_PHY_ADDR, is_c45);
- if (phy == ERR_PTR(-ENODEV)) {
- dev_info(sfp->dev, "no PHY detected\n");
- return 0;
- }
+ if (phy == ERR_PTR(-ENODEV))
+ return PTR_ERR(phy);
if (IS_ERR(phy)) {
dev_err(sfp->dev, "mdiobus scan returned %ld\n", PTR_ERR(phy));
return PTR_ERR(phy);
@@ -1962,6 +1969,7 @@ static void sfp_sm_module(struct sfp *sf
static void sfp_sm_main(struct sfp *sfp, unsigned int event)
{
unsigned long timeout;
+ int ret;
/* Some events are global */
if (sfp->sm_state != SFP_S_DOWN &&
@@ -2035,22 +2043,39 @@ static void sfp_sm_main(struct sfp *sfp,
sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
sfp->sm_fault_retries == N_FAULT_INIT);
} else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
- init_done: /* TX_FAULT deasserted or we timed out with TX_FAULT
- * clear. Probe for the PHY and check the LOS state.
- */
- if (sfp_sm_probe_for_phy(sfp)) {
- sfp_sm_next(sfp, SFP_S_FAIL, 0);
- break;
- }
- if (sfp_module_start(sfp->sfp_bus)) {
- sfp_sm_next(sfp, SFP_S_FAIL, 0);
+ init_done:
+ sfp->sm_phy_retries = R_PHY_RETRY;
+ goto phy_probe;
+ }
+ break;
+
+ case SFP_S_INIT_PHY:
+ if (event != SFP_E_TIMEOUT)
+ break;
+ phy_probe:
+ /* TX_FAULT deasserted or we timed out with TX_FAULT
+ * clear. Probe for the PHY and check the LOS state.
+ */
+ ret = sfp_sm_probe_for_phy(sfp);
+ if (ret == -ENODEV) {
+ if (--sfp->sm_phy_retries) {
+ sfp_sm_next(sfp, SFP_S_INIT_PHY, T_PHY_RETRY);
break;
+ } else {
+ dev_info(sfp->dev, "no PHY detected\n");
}
- sfp_sm_link_check_los(sfp);
-
- /* Reset the fault retry count */
- sfp->sm_fault_retries = N_FAULT;
+ } else if (ret) {
+ sfp_sm_next(sfp, SFP_S_FAIL, 0);
+ break;
}
+ if (sfp_module_start(sfp->sfp_bus)) {
+ sfp_sm_next(sfp, SFP_S_FAIL, 0);
+ break;
+ }
+ sfp_sm_link_check_los(sfp);
+
+ /* Reset the fault retry count */
+ sfp->sm_fault_retries = N_FAULT;
break;
case SFP_S_INIT_TX_FAULT:
|
