blob: 6d8444394553aa46e33ed81248dc50fca5934a14 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
|
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -559,4 +559,8 @@ config MTD_NAND_RB4XX
Enables support for the NAND flash chip on Mikrotik Routerboard
RB4xx series.
+config MTD_NAND_RB91X
+ tristate "MikroTik RB91x NAND driver support"
+ depends on ATH79 && MTD_RAW_NAND
+
endif # MTD_RAW_NAND
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_MTD_NAND_STM32_FMC2) += stm
obj-$(CONFIG_MTD_NAND_MESON) += meson_nand.o
obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nand.o
obj-$(CONFIG_MTD_NAND_RB4XX) += nand_rb4xx.o
+obj-$(CONFIG_MTD_NAND_RB91X) += rb91x_nand.o
nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o
nand-objs += nand_onfi.o
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -130,6 +130,10 @@ config GPIO_ATH79
Select this option to enable GPIO driver for
Atheros AR71XX/AR724X/AR913X SoC devices.
+config GPIO_LATCH
+ tristate "MikroTik RouterBOARD GPIO latch support"
+ depends on ATH79
+
config GPIO_RASPBERRYPI_EXP
tristate "Raspberry Pi 3 GPIO Expander"
default RASPBERRYPI_FIRMWARE
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -67,6 +67,7 @@ obj-$(CONFIG_GPIO_IT87) += gpio-it87.o
obj-$(CONFIG_GPIO_IXP4XX) += gpio-ixp4xx.o
obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o
+obj-$(CONFIG_GPIO_LATCH) += gpio-latch.o
obj-$(CONFIG_GPIO_LOONGSON1) += gpio-loongson1.o
obj-$(CONFIG_GPIO_LOONGSON) += gpio-loongson.o
obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o
|
