From 855c99aff4c1fb440a679cc8481947daf95643b8 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Wed, 13 Mar 2013 09:29:37 +0100 Subject: [PATCH 28/31] SPI: MIPS: lantiq: adds spi-xway This patch adds support for the SPI core found on several Lantiq SoCs. The Driver has been runtime tested in combination with m25p80 Flash Devices on Amazon_SE and VR9. Signed-off-by: Daniel Schwierzeck Signed-off-by: John Crispin --- drivers/spi/Kconfig | 8 + drivers/spi/Makefile | 1 + drivers/spi/spi-xway.c | 977 ++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 986 insertions(+) create mode 100644 drivers/spi/spi-xway.c diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 581ee2a..b2cd93c 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -527,6 +527,14 @@ config SPI_NUC900 help SPI driver for Nuvoton NUC900 series ARM SoCs +config SPI_XWAY + tristate "Lantiq XWAY SPI controller" + depends on LANTIQ && SOC_TYPE_XWAY + select SPI_BITBANG + help + This driver supports the Lantiq SoC SPI controller in master + mode. + # # Add new SPI master controllers in alphabetical order above this line # diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 95af48d..82d3799 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -79,3 +79,4 @@ obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o obj-$(CONFIG_SPI_TXX9) += spi-txx9.o obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o +obj-$(CONFIG_SPI_XWAY) += spi-xway.o diff --git a/drivers/spi/spi-xway.c b/drivers/spi/spi-xway.c new file mode 100644 index 0000000..61532e3 --- /dev/null +++ b/drivers/spi/spi-xway.c @@ -0,0 +1,977 @@ +/* + * Lantiq SoC SPI controller + * + * Copyright (C) 2011 Daniel Schwierzeck + * Copyright (C) 2012 John Crispin + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define LTQ_SPI_CLC 0x00 /* Clock control */ +#define LTQ_SPI_PISEL 0x04 /* Port input select */ +#define LTQ_SPI_ID 0x08 /* Identification */ +#define LTQ_SPI_CON 0x10 /* Control */ +#define LTQ_SPI_STAT 0x14 /* Status */ +#define LTQ_SPI_WHBSTATE 0x18 /* Write HW modified state */ +#define LTQ_SPI_TB 0x20 /* Transmit buffer */ +#define LTQ_SPI_RB 0x24 /* Receive buffer */ +#define LTQ_SPI_RXFCON 0x30 /* Receive FIFO control */ +#define LTQ_SPI_TXFCON 0x34 /* Transmit FIFO control */ +#define LTQ_SPI_FSTAT 0x38 /* FIFO status */ +#define LTQ_SPI_BRT 0x40 /* Baudrate timer */ +#define LTQ_SPI_BRSTAT 0x44 /* Baudrate timer status */ +#define LTQ_SPI_SFCON 0x60 /* Serial frame control */ +#define LTQ_SPI_SFSTAT 0x64 /* Serial frame status */ +#define LTQ_SPI_GPOCON 0x70 /* General purpose output control */ +#define LTQ_SPI_GPOSTAT 0x74 /* General purpose output status */ +#define LTQ_SPI_FGPO 0x78 /* Forced general purpose output */ +#define LTQ_SPI_RXREQ 0x80 /* Receive request */ +#define LTQ_SPI_RXCNT 0x84 /* Receive count */ +#define LTQ_SPI_DMACON 0xEC /* DMA control */ +#define LTQ_SPI_IRNEN 0xF4 /* Interrupt node enable */ +#define LTQ_SPI_IRNICR 0xF8 /* Interrupt node interrupt capture */ +#define LTQ_SPI_IRNCR 0xFC /* Interrupt node control */ + +#define LTQ_SPI_CLC_SMC_SHIFT 16 /* Clock divider for sleep mode */ +#define LTQ_SPI_CLC_SMC_MASK 0xFF +#define LTQ_SPI_CLC_RMC_SHIFT 8 /* Clock divider for normal run mode */ +#define LTQ_SPI_CLC_RMC_MASK 0xFF +#define LTQ_SPI_CLC_DISS BIT(1) /* Disable status bit */ +#define LTQ_SPI_CLC_DISR BIT(0) /* Disable request bit */ + +#define LTQ_SPI_ID_TXFS_SHIFT 24 /* Implemented TX FIFO size */ +#define LTQ_SPI_ID_TXFS_MASK 0x3F +#define LTQ_SPI_ID_RXFS_SHIFT 16 /* Implemented RX FIFO size */ +#define LTQ_SPI_ID_RXFS_MASK 0x3F +#define LTQ_SPI_ID_REV_MASK 0x1F /* Hardware revision number */ +#define LTQ_SPI_ID_CFG BIT(5) /* DMA interface support */ + +#define LTQ_SPI_CON_BM_SHIFT 16 /* Data width selection */ +#define LTQ_SPI_CON_BM_MASK 0x1F +#define LTQ_SPI_CON_EM BIT(24) /* Echo mode */ +#define LTQ_SPI_CON_IDLE BIT(23) /* Idle bit value */ +#define LTQ_SPI_CON_ENBV BIT(22) /* Enable byte valid control */ +#define LTQ_SPI_CON_RUEN BIT(12) /* Receive underflow error enable */ +#define LTQ_SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */ +#define LTQ_SPI_CON_AEN BIT(10) /* Abort error enable */ +#define LTQ_SPI_CON_REN BIT(9) /* Receive overflow error enable */ +#define LTQ_SPI_CON_TEN BIT(8) /* Transmit overflow error enable */ +#define LTQ_SPI_CON_LB BIT(7) /* Loopback control */ +#define LTQ_SPI_CON_PO BIT(6) /* Clock polarity control */ +#define LTQ_SPI_CON_PH BIT(5) /* Clock phase control */ +#define LTQ_SPI_CON_HB BIT(4) /* Heading control */ +#define LTQ_SPI_CON_RXOFF BIT(1) /* Switch receiver off */ +#define LTQ_SPI_CON_TXOFF BIT(0) /* Switch transmitter off */ + +#define LTQ_SPI_STAT_RXBV_MASK 0x7 +#define LTQ_SPI_STAT_RXBV_SHIFT 28 +#define LTQ_SPI_STAT_BSY BIT(13) /* Busy flag */ +#define LTQ_SPI_STAT_RUE BIT(12) /* Receive underflow error flag */ +#define LTQ_SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */ +#define LTQ_SPI_STAT_AE BIT(10) /* Abort error flag */ +#define LTQ_SPI_STAT_RE BIT(9) /* Receive error flag */ +#define LTQ_SPI_STAT_TE BIT(8) /* Transmit error flag */ +#define LTQ_SPI_STAT_MS BIT(1) /* Master/slave select bit */ +#define LTQ_SPI_STAT_EN BIT(0) /* Enable bit */ + +#define LTQ_SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */ +#define LTQ_SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */ +#define LTQ_SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */ +#define LTQ_SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */ +#define LTQ_SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error + flag */ +#define LTQ_SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */ +#define LTQ_SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */ +#define LTQ_SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */ +#define LTQ_SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */ +#define LTQ_SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */ +#define LTQ_SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */ +#define LTQ_SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */ +#define LTQ_SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */ +#define LTQ_SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */ +#define LTQ_SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */ +#define LTQ_SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */ +#define LTQ_SPI_WHBSTATE_CLR_ERRORS 0x0F50 + +#define LTQ_SPI_RXFCON_RXFITL_SHIFT 8 /* FIFO interrupt trigger level */ +#define LTQ_SPI_RXFCON_RXFITL_MASK 0x3F +#define LTQ_SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */ +#define LTQ_SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */ + +#define LTQ_SPI_TXFCON_TXFITL_SHIFT 8 /* FIFO interrupt trigger level */ +#define LTQ_SPI_TXFCON_TXFITL_MASK 0x3F +#define LTQ_SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */ +#define LTQ_SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */ + +#define LTQ_SPI_FSTAT_RXFFL_MASK 0x3f +#define LTQ_SPI_FSTAT_RXFFL_SHIFT 0 +#define LTQ_SPI_FSTAT_TXFFL_MASK 0x3f +#define LTQ_SPI_FSTAT_TXFFL_SHIFT 8 + +#define LTQ_SPI_GPOCON_ISCSBN_SHIFT 8 +#define LTQ_SPI_GPOCON_INVOUTN_SHIFT 0 + +#define LTQ_SPI_FGPO_SETOUTN_SHIFT 8 +#define LTQ_SPI_FGPO_CLROUTN_SHIFT 0 + +#define LTQ_SPI_RXREQ_RXCNT_MASK 0xFFFF /* Receive count value */ +#define LTQ_SPI_RXCNT_TODO_MASK 0xFFFF /* Recevie to-do value */ + +#define LTQ_SPI_IRNEN_F BIT(3) /* Frame end interrupt request */ +#define LTQ_SPI_IRNEN_E BIT(2) /* Error end interrupt request */ +#define LTQ_SPI_IRNEN_T BIT(1) /* Transmit end interrupt request */ +#define LTQ_SPI_IRNEN_R BIT(0) /* Receive end interrupt request */ +#define LTQ_SPI_IRNEN_ALL 0xF + +struct ltq_spi { + struct spi_bitbang bitbang; + struct completion done; + spinlock_t lock; + + struct device *dev; + void __iomem *base; + struct clk *fpiclk; + struct clk *spiclk; + + int status; + int irq[3]; + + const u8 *tx; + u8 *rx; + u32 tx_cnt; + u32 rx_cnt; + u32 len; + struct spi_transfer *curr_transfer; + + u32 (*get_tx) (struct ltq_spi *); + + u16 txfs; + u16 rxfs; + unsigned dma_support:1; + unsigned cfg_mode:1; +}; + +static inline struct ltq_spi *ltq_spi_to_hw(struct spi_device *spi) +{ + return spi_master_get_devdata(spi->master); +} + +static inline u32 ltq_spi_reg_read(struct ltq_spi *hw, u32 reg) +{ + return ioread32be(hw->base + reg); +} + +static inline void ltq_spi_reg_write(struct ltq_spi *hw, u32 val, u32 reg) +{ + iowrite32be(val, hw->base + reg); +} + +static inline void ltq_spi_reg_setbit(struct ltq_spi *hw, u32 bits, u32 reg) +{ + u32 val; + + val = ltq_spi_reg_read(hw, reg); + val |= bits; + ltq_spi_reg_write(hw, val, reg); +} + +static inline void ltq_spi_reg_clearbit(struct ltq_spi *hw, u32 bits, u32 reg) +{ + u32 val; + + val = ltq_spi_reg_read(hw, reg); + val &= ~bits; + ltq_spi_reg_write(hw, val, reg); +} + +static void ltq_spi_hw_enable(struct ltq_spi *hw) +{ + u32 clc; + + /* Power-up module */ + clk_enable(hw->spiclk); + + /* + * Set clock divider for run mode to 1 to + * run at same frequency as FPI bus + */ + clc = (1 << LTQ_SPI_CLC_RMC_SHIFT); + ltq_spi_reg_write(hw, clc, LTQ_SPI_CLC); +} + +static void ltq_spi_hw_disable(struct ltq_spi *hw) +{ + /* Set clock divider to 0 and set module disable bit */ + ltq_spi_reg_write(hw, LTQ_SPI_CLC_DISS, LTQ_SPI_CLC); + + /* Power-down module */ + clk_disable(hw->spiclk); +} + +static void ltq_spi_reset_fifos(struct ltq_spi *hw) +{ + u32 val; + + /* + * Enable and flush FIFOs. Set interrupt trigger level to + * half of FIFO count implemented in hardware. + */ + if (hw->txfs > 1) { + val = hw->txfs << (LTQ_SPI_TXFCON_TXFITL_SHIFT - 1); + val |= LTQ_SPI_TXFCON_TXFEN | LTQ_SPI_TXFCON_TXFLU; + ltq_spi_reg_write(hw, val, LTQ_SPI_TXFCON); + } + + if (hw->rxfs > 1) { + val = hw->rxfs << (LTQ_SPI_RXFCON_RXFITL_SHIFT - 1); + val |= LTQ_SPI_RXFCON_RXFEN | LTQ_SPI_RXFCON_RXFLU; + ltq_spi_reg_write(hw, val, LTQ_SPI_RXFCON); + } +} + +static inline int ltq_spi_wait_ready(struct ltq_spi *hw) +{ + u32 stat; + unsigned long timeout; + + timeout = jiffies + msecs_to_jiffies(200); + + do { + stat = ltq_spi_reg_read(hw, LTQ_SPI_STAT); + if (!(stat & LTQ_SPI_STAT_BSY)) + return 0; + + cond_resched(); + } while (!time_after_eq(jiffies, timeout)); + + dev_err(hw->dev, "SPI wait ready timed out stat: %x\n", stat); + + return -ETIMEDOUT; +} + +static void ltq_spi_config_mode_set(struct ltq_spi *hw) +{ + if (hw->cfg_mode) + return; + + /* + * Putting the SPI module in config mode is only safe if no + * transfer is in progress as indicated by busy flag STATE.BSY. + */ + if (ltq_spi_wait_ready(hw)) { + ltq_spi_reset_fifos(hw); + hw->status = -ETIMEDOUT; + } + ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLREN, LTQ_SPI_WHBSTATE); + + hw->cfg_mode = 1; +} + +static void ltq_spi_run_mode_set(struct ltq_spi *hw) +{ + if (!hw->cfg_mode) + return; + + ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_SETEN, LTQ_SPI_WHBSTATE); + + hw->cfg_mode = 0; +} + +static u32 ltq_spi_tx_word_u8(struct ltq_spi *hw) +{ + const u8 *tx = hw->tx; + u32 data = *tx++; + + hw->tx_cnt++; + hw->tx++; + + return data; +} + +static u32 ltq_spi_tx_word_u16(struct ltq_spi *hw) +{ + const u16 *tx = (u16 *) hw->tx; + u32 data = *tx++; + + hw->tx_cnt += 2; + hw->tx += 2; + + return data; +} + +static u32 ltq_spi_tx_word_u32(struct ltq_spi *hw) +{ + const u32 *tx = (u32 *) hw->tx; + u32 data = *tx++; + + hw->tx_cnt += 4; + hw->tx += 4; + + return data; +} + +static void ltq_spi_bits_per_word_set(struct spi_device *spi) +{ + struct ltq_spi *hw = ltq_spi_to_hw(spi); + u32 bm; + u8 bits_per_word = spi->bits_per_word; + + /* + * Use either default value of SPI device or value + * from current transfer. + */ + if (hw->curr_transfer && hw->curr_transfer->bits_per_word) + bits_per_word = hw->curr_transfer->bits_per_word; + + if (bits_per_word <= 8) + hw->get_tx = ltq_spi_tx_word_u8; + else if (bits_per_word <= 16) + hw->get_tx = ltq_spi_tx_word_u16; + else if (bits_per_word <= 32) + hw->get_tx = ltq_spi_tx_word_u32; + + /* CON.BM value = bits_per_word - 1 */ + bm = (bits_per_word - 1) << LTQ_SPI_CON_BM_SHIFT; + + ltq_spi_reg_clearbit(hw, LTQ_SPI_CON_BM_MASK << + LTQ_SPI_CON_BM_SHIFT, LTQ_SPI_CON); + ltq_spi_reg_setbit(hw, bm, LTQ_SPI_CON); +} + +static void ltq_spi_speed_set(struct spi_device *spi) +{ + struct ltq_spi *hw = ltq_spi_to_hw(spi); + u32 br, max_speed_hz, spi_clk; + u32 speed_hz = spi->max_speed_hz; + + /* + * Use either default value of SPI device or value + * from current transfer. + */ + if (hw->curr_transfer && hw->curr_transfer->speed_hz) + speed_hz = hw->curr_transfer->speed_hz; + + /* + * SPI module clock is derived from FPI bus clock dependent on + * divider value in CLC.RMS which is always set to 1. + */ + spi_clk = clk_get_rate(hw->fpiclk); + + /* + * Maximum SPI clock frequency in master mode is half of + * SPI module clock frequency. Maximum reload value of + * baudrate generator BR is 2^16. + */ + max_speed_hz = spi_clk / 2; + if (speed_hz >= max_speed_hz) + br = 0; + else + br = (max_speed_hz / speed_hz) - 1; + + if (br > 0xFFFF) + br = 0xFFFF; + + ltq_spi_reg_write(hw, br, LTQ_SPI_BRT); +} + +static void ltq_spi_clockmode_set(struct spi_device *spi) +{ + struct ltq_spi *hw = ltq_spi_to_hw(spi); + u32 con; + + con = ltq_spi_reg_read(hw, LTQ_SPI_CON); + + /* + * SPI mode mapping in CON register: + * Mode CPOL CPHA CON.PO CON.PH + * 0 0 0 0 1 + * 1 0 1 0 0 + * 2 1 0 1 1 + * 3 1 1 1 0 + */ + if (spi->mode & SPI_CPHA) + con &= ~LTQ_SPI_CON_PH; + else + con |= LTQ_SPI_CON_PH; + + if (spi->mode & SPI_CPOL) + con |= LTQ_SPI_CON_PO; + else + con &= ~LTQ_SPI_CON_PO; + + /* Set heading control */ + if (spi->mode & SPI_LSB_FIRST) + con &= ~LTQ_SPI_CON_HB; + else + con |= LTQ_SPI_CON_HB; + + ltq_spi_reg_write(hw, con, LTQ_SPI_CON); +} + +static void ltq_spi_xmit_set(struct ltq_spi *hw, struct spi_transfer *t) +{ + u32 con; + + con = ltq_spi_reg_read(hw, LTQ_SPI_CON); + + if (t) { + if (t->tx_buf && t->rx_buf) { + con &= ~(LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF); + } else if (t->rx_buf) { + con &= ~LTQ_SPI_CON_RXOFF; + con |= LTQ_SPI_CON_TXOFF; + } else if (t->tx_buf) { + con &= ~LTQ_SPI_CON_TXOFF; + con |= LTQ_SPI_CON_RXOFF; + } + } else + con |= (LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF); + + ltq_spi_reg_write(hw, con, LTQ_SPI_CON); +} + +static void ltq_spi_internal_cs_activate(struct spi_device *spi) +{ + struct ltq_spi *hw = ltq_spi_to_hw(spi); + u32 fgpo; + + fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_CLROUTN_SHIFT)); + ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO); +} + +static void ltq_spi_internal_cs_deactivate(struct spi_device *spi) +{ + struct ltq_spi *hw = ltq_spi_to_hw(spi); + u32 fgpo; + + fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_SETOUTN_SHIFT)); + ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO); +} + +static void ltq_spi_chipselect(struct spi_device *spi, int cs) +{ + struct ltq_spi *hw = ltq_spi_to_hw(spi); + + switch (cs) { + case BITBANG_CS_ACTIVE: + ltq_spi_bits_per_word_set(spi); + ltq_spi_speed_set(spi); + ltq_spi_clockmode_set(spi); + ltq_spi_run_mode_set(hw); + ltq_spi_internal_cs_activate(spi); + break; + + case BITBANG_CS_INACTIVE: + ltq_spi_internal_cs_deactivate(spi); + ltq_spi_config_mode_set(hw); + break; + } +} + +static int ltq_spi_setup_transfer(struct spi_device *spi, + struct spi_transfer *t) +{ + struct ltq_spi *hw = ltq_spi_to_hw(spi); + u8 bits_per_word = spi->bits_per_word; + + hw->curr_transfer = t; + + if (t && t->bits_per_word) + bits_per_word = t->bits_per_word; + + if (bits_per_word > 32) + return -EINVAL; + + ltq_spi_config_mode_set(hw); + + return 0; +} + +static int ltq_spi_setup(struct spi_device *spi) +{ + struct ltq_spi *hw = ltq_spi_to_hw(spi); + u32 gpocon, fgpo; + + /* Set default word length to 8 if not set */ + if (!spi->bits_per_word) + spi->bits_per_word = 8; + + if (spi->bits_per_word > 32) + return -EINVAL; + + /* + * Up to six GPIOs can be connected to the SPI module + * via GPIO alternate function to control the chip select lines. + */ + gpocon = (1 << (spi->chip_select + + LTQ_SPI_GPOCON_ISCSBN_SHIFT)); + + if (spi->mode & SPI_CS_HIGH) + gpocon |= (1 << spi->chip_select); + + fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_SETOUTN_SHIFT)); + + ltq_spi_reg_setbit(hw, gpocon, LTQ_SPI_GPOCON); + ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO); + + return 0; +} + +static void ltq_spi_cleanup(struct spi_device *spi) +{ + +} + +static void ltq_spi_txfifo_write(struct ltq_spi *hw) +{ + u32 fstat, data; + u16 fifo_space; + + /* Determine how much FIFOs are free for TX data */ + fstat = ltq_spi_reg_read(hw, LTQ_SPI_FSTAT); + fifo_space = hw->txfs - ((fstat >> LTQ_SPI_FSTAT_TXFFL_SHIFT) & + LTQ_SPI_FSTAT_TXFFL_MASK); + + if (!fifo_space) + return; + + while (hw->tx_cnt < hw->len && fifo_space) { + data = hw->get_tx(hw); + ltq_spi_reg_write(hw, data, LTQ_SPI_TB); + fifo_space--; + } +} + +static void ltq_spi_rxfifo_read(struct ltq_spi *hw) +{ + u32 fstat, data, *rx32; + u16 fifo_fill; + u8 rxbv, shift, *rx8; + + /* Determine how much FIFOs are filled with RX data */ + fstat = ltq_spi_reg_read(hw, LTQ_SPI_FSTAT); + fifo_fill = ((fstat >> LTQ_SPI_FSTAT_RXFFL_SHIFT) + & LTQ_SPI_FSTAT_RXFFL_MASK); + + if (!fifo_fill) + return; + + /* + * The 32 bit FIFO is always used completely independent from the + * bits_per_word value. Thus four bytes have to be read at once + * per FIFO. + */ + rx32 = (u32 *) hw->rx; + while (hw->len - hw->rx_cnt >= 4 && fifo_fill) { + *rx32++ = ltq_spi_reg_read(hw, LTQ_SPI_RB); + hw->rx_cnt += 4; + hw->rx += 4; + fifo_fill--; + } + + /* + * If there are remaining bytes, read byte count from STAT.RXBV + * register and read the data byte-wise. + */ + while (fifo_fill && hw->rx_cnt < hw->len) { + rxbv = (ltq_spi_reg_read(hw, LTQ_SPI_STAT) >> + LTQ_SPI_STAT_RXBV_SHIFT) & LTQ_SPI_STAT_RXBV_MASK; + data = ltq_spi_reg_read(hw, LTQ_SPI_RB); + + shift = (rxbv - 1) * 8; + rx8 = hw->rx; + + while (rxbv) { + *rx8++ = (data >> shift) & 0xFF; + rxbv--; + shift -= 8; + hw->rx_cnt++; + hw->rx++; + } + + fifo_fill--; + } +} + +static void ltq_spi_rxreq_set(struct ltq_spi *hw) +{ + u32 rxreq, rxreq_max, rxtodo; + + rxtodo = ltq_spi_reg_read(hw, LTQ_SPI_RXCNT) & LTQ_SPI_RXCNT_TODO_MASK; + + /* + * In RX-only mode the serial clock is activated only after writing + * the expected amount of RX bytes into RXREQ register. + * To avoid receive overflows at high clocks it is better to request + * only the amount of bytes that fits into all FIFOs. This value + * depends on the FIFO size implemented in hardware. + */ + rxreq = hw->len - hw->rx_cnt; + rxreq_max = hw->rxfs << 2; + rxreq = min(rxreq_max, rxreq); + + if (!rxtodo && rxreq) + ltq_spi_reg_write(hw, rxreq, LTQ_SPI_RXREQ); +} + +static inline void ltq_spi_complete(struct ltq_spi *hw) +{ + complete(&hw->done); +} + +irqreturn_t ltq_spi_tx_irq(int irq, void *data) +{ + struct ltq_spi *hw = data; + unsigned long flags; + int completed = 0; + + spin_lock_irqsave(&hw->lock, flags); + + if (hw->tx_cnt < hw->len) + ltq_spi_txfifo_write(hw); + + if (hw->tx_cnt == hw->len) + completed = 1; + + spin_unlock_irqrestore(&hw->lock, flags); + + if (completed) + ltq_spi_complete(hw); + + return IRQ_HANDLED; +} + +irqreturn_t ltq_spi_rx_irq(int irq, void *data) +{ + struct ltq_spi *hw = data; + unsigned long flags; + int completed = 0; + + spin_lock_irqsave(&hw->lock, flags); + + if (hw->rx_cnt < hw->len) { + ltq_spi_rxfifo_read(hw); + + if (hw->tx && hw->tx_cnt < hw->len) + ltq_spi_txfifo_write(hw); + } + + if (hw->rx_cnt == hw->len) + completed = 1; + else if (!hw->tx) + ltq_spi_rxreq_set(hw); + + spin_unlock_irqrestore(&hw->lock, flags); + + if (completed) + ltq_spi_complete(hw); + + return IRQ_HANDLED; +} + +irqreturn_t ltq_spi_err_irq(int irq, void *data) +{ + struct ltq_spi *hw = data; + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + + /* Disable all interrupts */ + ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN); + + /* Clear all error flags */ + ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE); + + /* Flush FIFOs */ + ltq_spi_reg_setbit(hw, LTQ_SPI_RXFCON_RXFLU, LTQ_SPI_RXFCON); + ltq_spi_reg_setbit(hw, LTQ_SPI_TXFCON_TXFLU, LTQ_SPI_TXFCON); + + hw->status = -EIO; + spin_unlock_irqrestore(&hw->lock, flags); + + ltq_spi_complete(hw); + + return IRQ_HANDLED; +} + +static int ltq_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) +{ + struct ltq_spi *hw = ltq_spi_to_hw(spi); + u32 irq_flags = 0; + + hw->tx = t->tx_buf; + hw->rx = t->rx_buf; + hw->len = t->len; + hw->tx_cnt = 0; + hw->rx_cnt = 0; + hw->status = 0; + INIT_COMPLETION(hw->done); + + ltq_spi_xmit_set(hw, t); + + /* Enable error interrupts */ + ltq_spi_reg_setbit(hw, LTQ_SPI_IRNEN_E, LTQ_SPI_IRNEN); + + if (hw->tx) { + /* Initially fill TX FIFO with as much data as possible */ + ltq_spi_txfifo_write(hw); + irq_flags |= LTQ_SPI_IRNEN_T; + + /* Always enable RX interrupt in Full Duplex mode */ + if (hw->rx) + irq_flags |= LTQ_SPI_IRNEN_R; + } else if (hw->rx) { + /* Start RX clock */ + ltq_spi_rxreq_set(hw); + + /* Enable RX interrupt to receive data from RX FIFOs */ + irq_flags |= LTQ_SPI_IRNEN_R; + } + + /* Enable TX or RX interrupts */ + ltq_spi_reg_setbit(hw, irq_flags, LTQ_SPI_IRNEN); + wait_for_completion_interruptible(&hw->done); + + /* Disable all interrupts */ + ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN); + + /* + * Return length of current transfer for bitbang utility code if + * no errors occured during transmission. + */ + if (!hw->status) + hw->status = hw->len; + + return hw->status; +} + +static const struct ltq_spi_irq_map { + char *name; + irq_handler_t handler; +} ltq_spi_irqs[] = { + { "spi_rx", ltq_spi_rx_irq }, + { "spi_tx", ltq_spi_tx_irq }, + { "spi_err", ltq_spi_err_irq }, +}; + +static int ltq_spi_probe(struct platform_device *pdev) +{ + struct resource irqres[3]; + struct spi_master *master; + struct resource *r; + struct ltq_spi *hw; + int ret, i; + u32 data, id; + + if (of_irq_to_resource_table(pdev->dev.of_node, irqres, 3) != 3) { + dev_err(&pdev->dev, "IRQ settings missing in device tree\n"); + return -EINVAL; + } + + master = spi_alloc_master(&pdev->dev, sizeof(struct ltq_spi)); + if (!master) { + dev_err(&pdev->dev, "spi_alloc_master\n"); + ret = -ENOMEM; + goto err; + } + + hw = spi_master_get_devdata(master); + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (r == NULL) { + dev_err(&pdev->dev, "platform_get_resource\n"); + ret = -ENOENT; + goto err_master; + } + + r = devm_request_mem_region(&pdev->dev, r->start, resource_size(r), + pdev->name); + if (!r) { + dev_err(&pdev->dev, "failed to request memory region\n"); + ret = -ENXIO; + goto err_master; + } + + hw->base = devm_ioremap_nocache(&pdev->dev, r->start, resource_size(r)); + if (!hw->base) { + dev_err(&pdev->dev, "failed to remap memory region\n"); + ret = -ENXIO; + goto err_master; + } + + memset(hw->irq, 0, sizeof(hw->irq)); + for (i = 0; i < ARRAY_SIZE(ltq_spi_irqs); i++) { + hw->irq[i] = irqres[i].start; + ret = request_irq(hw->irq[i], ltq_spi_irqs[i].handler, + 0, ltq_spi_irqs[i].name, hw); + if (ret) { + dev_err(&pdev->dev, "failed to request %s irq (%d)\n", + ltq_spi_irqs[i].name, hw->irq[i]); + goto err_irq; + } + } + + hw->fpiclk = clk_get_fpi(); + if (IS_ERR(hw->fpiclk)) { + dev_err(&pdev->dev, "failed to get fpi clock\n"); + ret = PTR_ERR(hw->fpiclk); + goto err_clk; + } + + hw->spiclk = clk_get(&pdev->dev, NULL); + if (IS_ERR(hw->spiclk)) { + dev_err(&pdev->dev, "failed to get spi clock gate\n"); + ret = PTR_ERR(hw->spiclk); + goto err_clk; + } + + hw->bitbang.master = spi_master_get(master); + hw->bitbang.chipselect = ltq_spi_chipselect; + hw->bitbang.setup_transfer = ltq_spi_setup_transfer; + hw->bitbang.txrx_bufs = ltq_spi_txrx_bufs; + + if (of_machine_is_compatible("lantiq,ase")) + master->num_chipselect = 3; + else + master->num_chipselect = 6; + master->bus_num = pdev->id; + master->setup = ltq_spi_setup; + master->cleanup = ltq_spi_cleanup; + master->dev.of_node = pdev->dev.of_node; + + hw->dev = &pdev->dev; + init_completion(&hw->done); + spin_lock_init(&hw->lock); + + ltq_spi_hw_enable(hw); + + /* Read module capabilities */ + id = ltq_spi_reg_read(hw, LTQ_SPI_ID); + hw->txfs = (id >> LTQ_SPI_ID_TXFS_SHIFT) & LTQ_SPI_ID_TXFS_MASK; + hw->rxfs = (id >> LTQ_SPI_ID_TXFS_SHIFT) & LTQ_SPI_ID_TXFS_MASK; + hw->dma_support = (id & LTQ_SPI_ID_CFG) ? 1 : 0; + + ltq_spi_config_mode_set(hw); + + /* Enable error checking, disable TX/RX, set idle value high */ + data = LTQ_SPI_CON_RUEN | LTQ_SPI_CON_AEN | + LTQ_SPI_CON_TEN | LTQ_SPI_CON_REN | + LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF | LTQ_SPI_CON_IDLE; + ltq_spi_reg_write(hw, data, LTQ_SPI_CON); + + /* Enable master mode and clear error flags */ + ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_SETMS | + LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE); + + /* Reset GPIO/CS registers */ + ltq_spi_reg_write(hw, 0x0, LTQ_SPI_GPOCON); + ltq_spi_reg_write(hw, 0xFF00, LTQ_SPI_FGPO); + + /* Enable and flush FIFOs */ + ltq_spi_reset_fifos(hw); + + ret = spi_bitbang_start(&hw->bitbang); + if (ret) { + dev_err(&pdev->dev, "spi_bitbang_start failed\n"); + goto err_bitbang; + } + + platform_set_drvdata(pdev, hw); + + pr_info("Lantiq SoC SPI controller rev %u (TXFS %u, RXFS %u, DMA %u)\n", + id & LTQ_SPI_ID_REV_MASK, hw->txfs, hw->rxfs, hw->dma_support); + + return 0; + +err_bitbang: + ltq_spi_hw_disable(hw); + +err_clk: + if (hw->fpiclk) + clk_put(hw->fpiclk); + if (hw->spiclk) + clk_put(hw->spiclk); + +err_irq: + clk_put(hw->fpiclk); + + for (; i > 0; i--) + free_irq(hw->irq[i], hw); + +err_master: + spi_master_put(master); + +err: + return ret; +} + +static int ltq_spi_remove(struct platform_device *pdev) +{ + struct ltq_spi *hw = platform_get_drvdata(pdev); + int ret, i; + + ret = spi_bitbang_stop(&hw->bitbang); + if (ret) + return ret; + + platform_set_drvdata(pdev, NULL); + + ltq_spi_config_mode_set(hw); + ltq_spi_hw_disable(hw); + + for (i = 0; i < ARRAY_SIZE(hw->irq); i++) + if (0 < hw->irq[i]) + free_irq(hw->irq[i], hw); + + if (hw->fpiclk) + clk_put(hw->fpiclk); + if (hw->spiclk) + clk_put(hw->spiclk); + + spi_master_put(hw->bitbang.master); + + return 0; +} + +static const struct of_device_id ltq_spi_match[] = { + { .compatible = "lantiq,spi-xway" }, + {}, +}; +MODULE_DEVICE_TABLE(of, ltq_spi_match); + +static struct platform_driver ltq_spi_driver = { + .probe = ltq_spi_probe, + .remove = ltq_spi_remove, + .driver = { + .name = "spi-xway", + .owner = THIS_MODULE, + .of_match_table = ltq_spi_match, + }, +}; + +module_platform_driver(ltq_spi_driver); + +MODULE_DESCRIPTION("Lantiq SoC SPI controller driver"); +MODULE_AUTHOR("Daniel Schwierzeck "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:spi-xway"); -- 1.7.10.4