From: Alexey Brodkin Subject: usb: Remove annoying warning about bogus URB When ath9k-htc Wi-Fi dongle is used with generic OHCI controller infinite stream of warnings appears in debug console like this: -------------------------->8---------------------- usb 1-1: new full-speed USB device number 2 using ohci-platform usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested usb 1-1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 19 at drivers/usb/core/urb.c:449 usb_submit_urb+0x1b4/0x498() usb 1-1: BOGUS urb xfer, pipe 1 != type 3 Modules linked in: CPU: 0 PID: 19 Comm: kworker/0:1 Not tainted 4.4.0-rc4-00017-g00e2d79-dirty #3 Workqueue: events request_firmware_work_func Stack Trace: arc_unwind_core.constprop.1+0xa4/0x110 ---[ end trace 649ef8c342817fc2 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 19 at drivers/usb/core/urb.c:449 usb_submit_urb+0x1b4/0x498() usb 1-1: BOGUS urb xfer, pipe 1 != type 3 Modules linked in: CPU: 0 PID: 19 Comm: kworker/0:1 Tainted: G W 4.4.0-rc4-00017-g00e2d79-dirty #3 Workqueue: events request_firmware_work_func Stack Trace: arc_unwind_core.constprop.1+0xa4/0x110 ---[ end trace 649ef8c342817fc3 ]--- ------------[ cut here ]------------ -------------------------->8---------------------- There're some discussions in mailing lists proposing to disable that particular check alltogether and magically all seem to work fine with muted warning. Anyways new thread on that regard could be found here: http://lists.infradead.org/pipermail/linux-snps-arc/2016-July/001310.html Let's see what comes out of that new discussion, hopefully patching of generic USB stuff won't be required then. Signed-off-by: Alexey Brodkin --- drivers/leds/Makefile | 1 + drivers/leds/trigger/Kconfig | 7 +++++++ 2 files changed, 8 insertions(+) diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 3965070190f5..6273d7e29eab 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -77,3 +77,4 @@ obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o # LED Triggers obj-$(CONFIG_LEDS_TRIGGERS) += trigger/ +obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o diff --git a/drivers/leds/trigger/Kconfig b/drivers/leds/trigger/Kconfig index 3f9ddb9fafa7..4ec185389324 100644 --- a/drivers/leds/trigger/Kconfig +++ b/drivers/leds/trigger/Kconfig @@ -126,4 +126,11 @@ config LEDS_TRIGGER_PANIC a different trigger. If unsure, say Y. +config LEDS_TRIGGER_NETDEV + tristate "LED Netdev Trigger" + depends on NET && LEDS_TRIGGERS + help + This allows LEDs to be controlled by network device activity. + If unsure, say Y. + endif # LEDS_TRIGGERS -- 2.11.0