From 789d3eeb2367f92193a0882f7cdab03f0f9d6930 Mon Sep 17 00:00:00 2001 From: Thomas Perrot Date: Thu, 16 Dec 2021 13:42:27 +0530 Subject: [PATCH] bus: mhi: pci_generic: Introduce Sierra EM919X support Add support for EM919X modems, this modem series is based on SDX55 qcom chip. It is mandatory to use the same ring for control+data and diag events. Link: https://lore.kernel.org/r/20211123081541.648426-1-thomas.perrot@bootlin.com Tested-by: Aleksander Morgado Reviewed-by: Manivannan Sadhasivam Signed-off-by: Thomas Perrot Signed-off-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20211216081227.237749-11-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/bus/mhi/pci_generic.c | 43 +++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) --- a/drivers/bus/mhi/pci_generic.c +++ b/drivers/bus/mhi/pci_generic.c @@ -406,6 +406,46 @@ static const struct mhi_pci_dev_info mhi .mru_default = 32768, }; +static const struct mhi_channel_config mhi_sierra_em919x_channels[] = { + MHI_CHANNEL_CONFIG_UL_SBL(2, "SAHARA", 32, 0), + MHI_CHANNEL_CONFIG_DL_SBL(3, "SAHARA", 256, 0), + MHI_CHANNEL_CONFIG_UL(4, "DIAG", 32, 0), + MHI_CHANNEL_CONFIG_DL(5, "DIAG", 32, 0), + MHI_CHANNEL_CONFIG_UL(12, "MBIM", 128, 0), + MHI_CHANNEL_CONFIG_DL(13, "MBIM", 128, 0), + MHI_CHANNEL_CONFIG_UL(14, "QMI", 32, 0), + MHI_CHANNEL_CONFIG_DL(15, "QMI", 32, 0), + MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0), + MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0), + MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0", 512, 1), + MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0", 512, 2), +}; + +static struct mhi_event_config modem_sierra_em919x_mhi_events[] = { + /* first ring is control+data and DIAG ring */ + MHI_EVENT_CONFIG_CTRL(0, 2048), + /* Hardware channels request dedicated hardware event rings */ + MHI_EVENT_CONFIG_HW_DATA(1, 2048, 100), + MHI_EVENT_CONFIG_HW_DATA(2, 2048, 101) +}; + +static const struct mhi_controller_config modem_sierra_em919x_config = { + .max_channels = 128, + .timeout_ms = 24000, + .num_channels = ARRAY_SIZE(mhi_sierra_em919x_channels), + .ch_cfg = mhi_sierra_em919x_channels, + .num_events = ARRAY_SIZE(modem_sierra_em919x_mhi_events), + .event_cfg = modem_sierra_em919x_mhi_events, +}; + +static const struct mhi_pci_dev_info mhi_sierra_em919x_info = { + .name = "sierra-em919x", + .config = &modem_sierra_em919x_config, + .bar_num = MHI_PCI_DEFAULT_BAR_NUM, + .dma_data_width = 32, + .sideband_wake = false, +}; + static const struct mhi_channel_config mhi_telit_fn980_hw_v1_channels[] = { MHI_CHANNEL_CONFIG_UL(14, "QMI", 32, 0), MHI_CHANNEL_CONFIG_DL(15, "QMI", 32, 0), @@ -480,6 +520,9 @@ static const struct mhi_pci_dev_info mhi }; static const struct pci_device_id mhi_pci_id_table[] = { + /* EM919x (sdx55), use the same vid:pid as qcom-sdx55m */ + { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, 0x18d7, 0x0200), + .driver_data = (kernel_ulong_t) &mhi_sierra_em919x_info }, /* Telit FN980 hardware revision v1 */ { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, 0x1C5D, 0x2000), .driver_data = (kernel_ulong_t) &mhi_telit_fn980_hw_v1_info },