From 63f4970ce038e60455a6225b317d0b259e046c94 Mon Sep 17 00:00:00 2001 From: Jacopo Mondi Date: Tue, 16 Jun 2020 16:12:39 +0200 Subject: [PATCH] media: pxa_camera: Use the new set_mbus_config op Upstream https://patchwork.linuxtv.org/patch/64671/ Move the PXA camera driver to use the new set_mbus_config pad operation. For this platform the change is not only cosmetic, as the pxa driver is currently the only driver in mainline to make use of the g_mbus_config and s_mbus_config video operations. The existing driver semantic is the following: - Collect all supported mbus config flags from the remote end - Match them with the supported PXA mbus configuration flags - If the remote subdevice allows multiple options for for VSYNC, HSYNC and PCLK polarity, use platform data requested settings The semantic of the new get_mbus_config and set_mbus_config differs from the corresponding video ops, particularly in the fact get_mbus_config reports the current mbus configuration and not the set of supported configuration options, with set_mbus_config always reporting the actual mbus configuration applied to the remote subdevice. Adapt the driver to perform the following - Set the remote subdevice mbus configuration according to the PXA platform data preferences. - If the applied configuration differs from the requested one (i.e. the remote subdevice does not allow changing one setting) make sure that - The remote end does not claim for DATA_ACTIVE_LOW, which seems not supported by the platform - The bus mastering roles match While at there remove a few checks performed on the media bus configuration at get_format() time as they do not belong there. Compile-tested only. Signed-off-by: Jacopo Mondi --- drivers/media/platform/pxa_camera.c | 189 ++++++++-------------------- 1 file changed, 51 insertions(+), 138 deletions(-) --- a/drivers/media/platform/pxa_camera.c +++ b/drivers/media/platform/pxa_camera.c @@ -605,42 +605,6 @@ static const struct pxa_mbus_pixelfmt *p return pxa_mbus_find_fmtdesc(code, mbus_fmt, ARRAY_SIZE(mbus_fmt)); } -static unsigned int pxa_mbus_config_compatible(const struct v4l2_mbus_config *cfg, - unsigned int flags) -{ - unsigned long common_flags; - bool hsync = true, vsync = true, pclk, data, mode; - bool mipi_lanes, mipi_clock; - - common_flags = cfg->flags & flags; - - switch (cfg->type) { - case V4L2_MBUS_PARALLEL: - hsync = common_flags & (V4L2_MBUS_HSYNC_ACTIVE_HIGH | - V4L2_MBUS_HSYNC_ACTIVE_LOW); - vsync = common_flags & (V4L2_MBUS_VSYNC_ACTIVE_HIGH | - V4L2_MBUS_VSYNC_ACTIVE_LOW); - /* fall through */ - case V4L2_MBUS_BT656: - pclk = common_flags & (V4L2_MBUS_PCLK_SAMPLE_RISING | - V4L2_MBUS_PCLK_SAMPLE_FALLING); - data = common_flags & (V4L2_MBUS_DATA_ACTIVE_HIGH | - V4L2_MBUS_DATA_ACTIVE_LOW); - mode = common_flags & (V4L2_MBUS_MASTER | V4L2_MBUS_SLAVE); - return (!hsync || !vsync || !pclk || !data || !mode) ? - 0 : common_flags; - case V4L2_MBUS_CSI2_DPHY: - mipi_lanes = common_flags & V4L2_MBUS_CSI2_LANES; - mipi_clock = common_flags & (V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK | - V4L2_MBUS_CSI2_CONTINUOUS_CLOCK); - return (!mipi_lanes || !mipi_clock) ? 0 : common_flags; - default: - WARN_ON(1); - return -EINVAL; - } - return 0; -} - /** * struct pxa_camera_format_xlate - match between host and sensor formats * @code: code of a sensor provided format @@ -1231,31 +1195,6 @@ static irqreturn_t pxa_camera_irq(int ir return IRQ_HANDLED; } -static int test_platform_param(struct pxa_camera_dev *pcdev, - unsigned char buswidth, unsigned long *flags) -{ - /* - * Platform specified synchronization and pixel clock polarities are - * only a recommendation and are only used during probing. The PXA270 - * quick capture interface supports both. - */ - *flags = (pcdev->platform_flags & PXA_CAMERA_MASTER ? - V4L2_MBUS_MASTER : V4L2_MBUS_SLAVE) | - V4L2_MBUS_HSYNC_ACTIVE_HIGH | - V4L2_MBUS_HSYNC_ACTIVE_LOW | - V4L2_MBUS_VSYNC_ACTIVE_HIGH | - V4L2_MBUS_VSYNC_ACTIVE_LOW | - V4L2_MBUS_DATA_ACTIVE_HIGH | - V4L2_MBUS_PCLK_SAMPLE_RISING | - V4L2_MBUS_PCLK_SAMPLE_FALLING; - - /* If requested data width is supported by the platform, use it */ - if ((1 << (buswidth - 1)) & pcdev->width_flags) - return 0; - - return -EINVAL; -} - static void pxa_camera_setup_cicr(struct pxa_camera_dev *pcdev, unsigned long flags, __u32 pixfmt) { @@ -1598,99 +1537,78 @@ static int pxa_camera_init_videobuf2(str */ static int pxa_camera_set_bus_param(struct pxa_camera_dev *pcdev) { + unsigned int bus_width = pcdev->current_fmt->host_fmt->bits_per_sample; struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,}; u32 pixfmt = pcdev->current_fmt->host_fmt->fourcc; - unsigned long bus_flags, common_flags; + int mbus_config; int ret; - ret = test_platform_param(pcdev, - pcdev->current_fmt->host_fmt->bits_per_sample, - &bus_flags); - if (ret < 0) - return ret; - - ret = sensor_call(pcdev, video, g_mbus_config, &cfg); - if (!ret) { - common_flags = pxa_mbus_config_compatible(&cfg, - bus_flags); - if (!common_flags) { - dev_warn(pcdev_to_dev(pcdev), - "Flags incompatible: camera 0x%x, host 0x%lx\n", - cfg.flags, bus_flags); - return -EINVAL; - } - } else if (ret != -ENOIOCTLCMD) { - return ret; - } else { - common_flags = bus_flags; + if (!((1 << (bus_width - 1)) & pcdev->width_flags)) { + dev_err(pcdev_to_dev(pcdev), "Unsupported bus width %u", + bus_width); + return -EINVAL; } pcdev->channels = 1; /* Make choices, based on platform preferences */ - if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) && - (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) { - if (pcdev->platform_flags & PXA_CAMERA_HSP) - common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_HIGH; - else - common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_LOW; - } - - if ((common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) && - (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) { - if (pcdev->platform_flags & PXA_CAMERA_VSP) - common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_HIGH; - else - common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_LOW; - } - - if ((common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) && - (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)) { - if (pcdev->platform_flags & PXA_CAMERA_PCP) - common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_RISING; - else - common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_FALLING; - } - - cfg.flags = common_flags; - ret = sensor_call(pcdev, video, s_mbus_config, &cfg); - if (ret < 0 && ret != -ENOIOCTLCMD) { - dev_dbg(pcdev_to_dev(pcdev), - "camera s_mbus_config(0x%lx) returned %d\n", - common_flags, ret); - return ret; - } + mbus_config = 0; + if (pcdev->platform_flags & PXA_CAMERA_MASTER) + mbus_config |= V4L2_MBUS_MASTER; + else + mbus_config |= V4L2_MBUS_SLAVE; - pxa_camera_setup_cicr(pcdev, common_flags, pixfmt); + if (pcdev->platform_flags & PXA_CAMERA_HSP) + mbus_config |= V4L2_MBUS_HSYNC_ACTIVE_HIGH; + else + mbus_config |= V4L2_MBUS_HSYNC_ACTIVE_LOW; - return 0; -} + if (pcdev->platform_flags & PXA_CAMERA_VSP) + mbus_config |= V4L2_MBUS_VSYNC_ACTIVE_HIGH; + else + mbus_config |= V4L2_MBUS_VSYNC_ACTIVE_LOW; -static int pxa_camera_try_bus_param(struct pxa_camera_dev *pcdev, - unsigned char buswidth) -{ - struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,}; - unsigned long bus_flags, common_flags; - int ret = test_platform_param(pcdev, buswidth, &bus_flags); + if (pcdev->platform_flags & PXA_CAMERA_PCP) + mbus_config |= V4L2_MBUS_PCLK_SAMPLE_RISING; + else + mbus_config |= V4L2_MBUS_PCLK_SAMPLE_FALLING; + mbus_config |= V4L2_MBUS_DATA_ACTIVE_HIGH; - if (ret < 0) + cfg.flags = mbus_config; + ret = sensor_call(pcdev, pad, set_mbus_config, 0, &cfg); + if (ret < 0 && ret != -ENOIOCTLCMD) { + dev_err(pcdev_to_dev(pcdev), + "Failed to call set_mbus_config: %d\n", ret); return ret; + } + + /* + * If the requested media bus configuration has not been fully applied + * make sure it is supported by the platform. + * + * PXA does not support V4L2_MBUS_DATA_ACTIVE_LOW and the bus mastering + * roles should match. + */ + if (cfg.flags != mbus_config) { + unsigned int pxa_mbus_role = mbus_config & (V4L2_MBUS_MASTER | + V4L2_MBUS_SLAVE); + if (pxa_mbus_role != (cfg.flags & (V4L2_MBUS_MASTER | + V4L2_MBUS_SLAVE))) { + dev_err(pcdev_to_dev(pcdev), + "Unsupported mbus configuration: bus mastering\n"); + return -EINVAL; + } - ret = sensor_call(pcdev, video, g_mbus_config, &cfg); - if (!ret) { - common_flags = pxa_mbus_config_compatible(&cfg, - bus_flags); - if (!common_flags) { - dev_warn(pcdev_to_dev(pcdev), - "Flags incompatible: camera 0x%x, host 0x%lx\n", - cfg.flags, bus_flags); + if (cfg.flags & V4L2_MBUS_DATA_ACTIVE_LOW) { + dev_err(pcdev_to_dev(pcdev), + "Unsupported mbus configuration: DATA_ACTIVE_LOW\n"); return -EINVAL; } - } else if (ret == -ENOIOCTLCMD) { - ret = 0; } - return ret; + pxa_camera_setup_cicr(pcdev, cfg.flags, pixfmt); + + return 0; } static const struct pxa_mbus_pixelfmt pxa_camera_formats[] = { @@ -1738,11 +1656,6 @@ static int pxa_camera_get_formats(struct return 0; } - /* This also checks support for the requested bits-per-sample */ - ret = pxa_camera_try_bus_param(pcdev, fmt->bits_per_sample); - if (ret < 0) - return 0; - switch (code.code) { case MEDIA_BUS_FMT_UYVY8_2X8: formats++;