#!/bin/sh
append DRIVERS "atheros"

scan_atheros() {
	local device="$1"
	local wds
	local adhoc sta ap
	
	config_get vifs "$device" vifs
	for vif in $vifs; do
	
		config_get ifname "$vif" ifname
		config_set "$vif" ifname "${ifname:-ath}"
		
		config_get mode "$vif" mode
		case "$mode" in
			adhoc|ahdemo|sta|ap|monitor)
				append $mode "$vif"
			;;
			wds)
				config_get ssid "$vif" ssid
				[ -z "$ssid" ] && continue

				config_set "$vif" wds 1
				config_set "$vif" mode sta
				mode="sta"
				addr="$ssid"
				${addr:+append $mode "$vif"}
			;;
			*) echo "$device($vif): Invalid mode, ignored."; continue;;
		esac
	done

	case "${adhoc:+1}:${sta:+1}:${ap:+1}" in
		# valid mode combinations
		1::) wds="";;
		1::1);;
		:1:1)config_set "$device" nosbeacon 1;; # AP+STA, can't use beacon timers for STA
		:1:);;
		::1);;
		::);;
		*) echo "$device: Invalid mode combination in config"; return 1;;
	esac

	config_set "$device" vifs "${sta:+$sta }${ap:+$ap }${adhoc:+$adhoc }${ahdemo:+$ahdemo }${wds:+$wds }${monitor:+$monitor}"
}


disable_atheros() (
	local device="$1"

	set_wifi_down "$device"
	
	include /lib/network
	cd /proc/sys/net
	for dev in *; do
		grep "$device" "$dev/%parent" >/dev/null 2>/dev/null && {
			[ -f "/var/run/wifi-${dev}.pid" ] &&
				kill "$(cat "/var/run/wifi-${dev}.pid")"
			ifconfig "$dev" down
			unbridge "$dev"
			wlanconfig "$dev" destroy
		}
	done
	return 0
)

enable_atheros() {
	local device="$1"
	# Can only set the country code to one setting for the entire system. The last country code is the one that will be applied.
	config_get country "$device" country
	[ -z "$country" ] && country="0"
	local cc="0"
	[ -e /proc/sys/dev/$device/countrycode ] && cc="$(cat /proc/sys/dev/$device/countrycode)"
	if [ ! "$cc" = "$country" ] ; then
		rmmod ath_pci
		insmod ath_pci countrycode=$country
	fi
	config_get channel "$device" channel
	config_get vifs "$device" vifs
	config_get txpower "$device" txpower

	[ auto = "$channel" ] && channel=0

	local first=1
	for vif in $vifs; do
		local start_hostapd vif_txpower
		nosbeacon=
		config_get ifname "$vif" ifname
		config_get enc "$vif" encryption
		config_get eap_type "$vif" eap_type
		config_get mode "$vif" mode
		
		case "$mode" in
			sta) config_get nosbeacon "$device" nosbeacon;;
			adhoc) config_get nosbeacon "$vif" sw_merge;;
		esac
		
		config_get ifname "$vif" ifname
		ifname=$(wlanconfig "$ifname" create wlandev "$device" wlanmode "$mode" ${nosbeacon:+nosbeacon})
		[ $? -ne 0 ] && {
			echo "enable_atheros($device): Failed to set up $mode vif $ifname" >&2
			continue
		}
		config_set "$vif" ifname "$ifname"

		# only need to change freq band and channel on the first vif
		config_get hwmode "$device" hwmode
		[ -z "$hwmode" ] && config_get hwmode "$device" mode

		pureg=0
		case "$hwmode" in
			*b) hwmode=11b;;
			*bg) hwmode=11g;;
			*g) hwmode=11g; pureg=1;;
			*gdt) hwmode=11gdt;;
			*a) hwmode=11a;;
			*adt) hwmode=11adt;;
			*ast) hwmode=11ast;;
			*fh) hwmode=fh;;
			*) hwmode=auto;;
		esac
		iwpriv "$ifname" mode "$hwmode"
		iwpriv "$ifname" pureg "$pureg"

		[ "$first" = 1 ] && {
			iwconfig "$ifname" channel "$channel" >/dev/null 2>/dev/null 
		}
	
		config_get_bool hidden "$vif" hidden 0
		iwpriv "$ifname" hide_ssid "$hidden"

		config_get ff "$vif" ff
		if [ -n "$ff" ]; then
			iwpriv "$ifname" ff "$ff"
		fi

		config_get wds "$vif" wds
		case "$wds" in
			1|on|enabled) wds=1;;
			*) wds=0;;
		esac
		iwpriv "$ifname" wds "$wds"

		[ "$mode" = ap -a "$wds" = 1 ] && {
			config_get_bool wdssep "$vif" wdssep 1
			[ -n "$wdssep" ] && iwpriv "$ifname" wdssep "$wdssep"
		}

		case "$enc" in
			WEP|wep)
				for idx in 1 2 3 4; do
					config_get key "$vif" "key${idx}"
					iwconfig "$ifname" enc "[$idx]" "${key:-off}"
				done
				config_get key "$vif" key
				key="${key:-1}"
				case "$key" in
					[1234]) iwconfig "$ifname" enc "[$key]";;
					*) iwconfig "$ifname" enc "$key";;
				esac
			;;
			psk*|wpa*)
				start_hostapd=1
				config_get key "$vif" key
			;;
		esac

		case "$mode" in
			adhoc|ahdemo)
				config_get addr "$vif" bssid
				[ -z "$addr" ] || { 
					iwconfig "$ifname" ap "$addr"
				}
			;;
		esac
		config_get ssid "$vif" ssid

		config_get_bool bgscan "$vif" bgscan
		[ -n "$bgscan" ] && iwpriv "$ifname" bgscan "$bgscan"

		config_get_bool antdiv "$device" diversity
		config_get antrx "$device" rxantenna
		config_get anttx "$device" txantenna
		config_get_bool softled "$device" softled 1

		devname="$(cat /proc/sys/dev/$device/dev_name)"
		antgpio=
		case "$devname" in
			NanoStation2) antgpio=7;;
			NanoStation5) antgpio=1;;
		esac
		if [ -n "$antgpio" ]; then
			softled=0
			config_get antenna "$device" antenna
			case "$antenna" in
				external) antdiv=0; antrx=1; anttx=1 ;;
				horizontal) antdiv=0; antrx=1; anttx=1 ;;
				vertical) antdiv=0; antrx=2; anttx=2 ;;
				auto) antdiv=1; antrx=0; anttx=0 ;;
			esac
			
			[ -x "$(which gpioctl 2>/dev/null)" ] || antenna=
			case "$antenna" in
				horizontal|vertical|auto)
					gpioctl "dirout" "$antgpio" >/dev/null 2>&1
					gpioctl "set" "$antgpio" >/dev/null 2>&1
				;;
				external)
					gpioctl "dirout" "$antgpio" >/dev/null 2>&1
					gpioctl "clear" "$antgpio" >/dev/null 2>&1
				;;
			esac
		fi

		[ -n "$antdiv" ] && sysctl -w dev."$device".diversity="$antdiv" >&-
		[ -n "$antrx" ] && sysctl -w dev."$device".rxantenna="$antrx" >&-
		[ -n "$anttx" ] && sysctl -w dev."$device".txantenna="$anttx" >&-
		[ -n "$softled" ] && sysctl -w dev."$device".softled="$softled" >&-

		config_get distance "$device" distance
		[ -n "$distance" ] && athctrl -i "$device" -d "$distance" >&-

		config_get rate "$vif" rate
		[ -n "$rate" ] && iwconfig "$ifname" rate "${rate%%.*}"

		config_get mcast_rate "$vif" mcast_rate
		[ -n "$mcast_rate" ] && iwpriv "$ifname" mcast_rate "${mcast_rate%%.*}"

		config_get frag "$vif" frag
		[ -n "$frag" ] && iwconfig "$ifname" frag "${frag%%.*}"

		config_get rts "$vif" rts
		[ -n "$rts" ] && iwconfig "$ifname" rts "${rts%%.*}"

		config_get_bool comp "$vif" compression
		[ -n "$comp" ] && iwpriv "$ifname" compression "$comp"

		config_get_bool minrate "$vif" minrate
		[ -n "$minrate" ] && iwpriv "$ifname" minrate "$minrate"

		config_get_bool maxrate "$vif" maxrate
		[ -n "$maxrate" ] && iwpriv "$ifname" maxrate "$maxrate"

		config_get_bool burst "$vif" bursting
		[ -n "$burst" ] && iwpriv "$ifname" burst "$burst"

		config_get_bool wmm "$vif" wmm
		[ -n "$wmm" ] && iwpriv "$ifname" wmm "$wmm"

		config_get_bool xr "$vif" xr
		[ -n "$xr" ] && iwpriv "$ifname" xr "$xr"

		config_get_bool ar "$vif" ar
		[ -n "$ar" ] && iwpriv "$ifname" ar "$ar"

		config_get_bool turbo "$vif" turbo
		[ -n "$turbo" ] && iwpriv "$ifname" turbo "$turbo"

		config_get_bool doth "$vif" doth 0
		[ -n "$doth" ] && iwpriv "$ifname" doth "$doth"

		config_get_bool probereq "$vif" probereq
		[ -n "$probereq" ] && iwpriv "$ifname" probereq "$probereq"

		config_get maclist "$vif" maclist
		[ -n "$maclist" ] && {
			# flush MAC list
			iwpriv "$ifname" maccmd 3
			for mac in $maclist; do
				iwpriv "$ifname" addmac "$mac"
			done
		}

		config_get macpolicy "$vif" macpolicy
		case "$macpolicy" in
			allow)
				iwpriv "$ifname" maccmd 1
			;;
			deny)
				iwpriv "$ifname" maccmd 2
			;;
			*)
				# default deny policy if mac list exists
				[ -n "$maclist" ] && iwpriv "$ifname" maccmd 2
			;;
		esac

		ifconfig "$ifname" up

		local net_cfg bridge
		net_cfg="$(find_net_config "$vif")"
		[ -z "$net_cfg" ] || {
			bridge="$(bridge_interface "$net_cfg")"
			config_set "$vif" bridge "$bridge"
			start_net "$ifname" "$net_cfg"
		}
		[ -n "$ssid" ] && iwconfig "$ifname" essid on
		iwconfig "$ifname" essid "$ssid"
		set_wifi_up "$vif" "$ifname"

		# TXPower settings only work if device is up already
		# while atheros hardware theoretically is capable of per-vif (even per-packet) txpower
		# adjustment it does not work with the current atheros hal/madwifi driver

		config_get vif_txpower "$vif" txpower
		# use vif_txpower (from wifi-iface) instead of txpower (from wifi-device) if
		# the latter doesn't exist
		txpower="${txpower:-$vif_txpower}"
		[ -z "$txpower" ] || iwconfig "$ifname" txpower "${txpower%%.*}"

		case "$mode" in
			ap)
				config_get_bool isolate "$vif" isolate 0
				iwpriv "$ifname" ap_bridge "$((isolate^1))"

				if [ -n "$start_hostapd" ] && eval "type hostapd_setup_vif" 2>/dev/null >/dev/null; then
					hostapd_setup_vif "$vif" madwifi || {
						echo "enable_atheros($device): Failed to set up hostapd for interface $ifname" >&2
						# make sure this wifi interface won't accidentally stay open without encryption
						ifconfig "$ifname" down
						wlanconfig "$ifname" destroy
						continue
					}
				fi
			;;
			wds|sta)
				if eval "type wpa_supplicant_setup_vif" 2>/dev/null >/dev/null; then
					wpa_supplicant_setup_vif "$vif" madwifi || {
						echo "enable_atheros($device): Failed to set up wpa_supplicant for interface $ifname" >&2
						ifconfig "$ifname" down
						wlanconfig "$ifname" destroy
						continue
					}
				fi
			;;
		esac
		first=0
	done
}


detect_atheros() {
	cd /proc/sys/dev
	[ -d ath ] || return
	for dev in $(ls -d wifi* 2>&-); do
		config_get type "$dev" type
		devname="$(cat /proc/sys/dev/$dev/dev_name)"
		case "$devname" in
			NanoStation*)
				EXTRA_DEV="
# Ubiquiti NanoStation features
	option antenna	auto # (auto|horizontal|vertical|external)
"
			;;
		esac
		[ "$type" = atheros ] && return
		cat <<EOF
config wifi-device  $dev
	option type     atheros
	option channel  auto
$EXTRA_DEV
	# REMOVE THIS LINE TO ENABLE WIFI:
	option disabled 1

config wifi-iface
	option device	$dev
	option network	lan
	option mode	ap
	option ssid	OpenWrt
	option encryption none
EOF
	done
}
n174'>174</a>
<a id='n175' href='#n175'>175</a>
<a id='n176' href='#n176'>176</a>
<a id='n177' href='#n177'>177</a>
<a id='n178' href='#n178'>178</a>
<a id='n179' href='#n179'>179</a>
<a id='n180' href='#n180'>180</a>
<a id='n181' href='#n181'>181</a>
<a id='n182' href='#n182'>182</a>
<a id='n183' href='#n183'>183</a>
<a id='n184' href='#n184'>184</a>
<a id='n185' href='#n185'>185</a>
<a id='n186' href='#n186'>186</a>
<a id='n187' href='#n187'>187</a>
<a id='n188' href='#n188'>188</a>
<a id='n189' href='#n189'>189</a>
<a id='n190' href='#n190'>190</a>
<a id='n191' href='#n191'>191</a>
<a id='n192' href='#n192'>192</a>
<a id='n193' href='#n193'>193</a>
<a id='n194' href='#n194'>194</a>
<a id='n195' href='#n195'>195</a>
<a id='n196' href='#n196'>196</a>
<a id='n197' href='#n197'>197</a>
<a id='n198' href='#n198'>198</a>
<a id='n199' href='#n199'>199</a>
<a id='n200' href='#n200'>200</a>
<a id='n201' href='#n201'>201</a>
<a id='n202' href='#n202'>202</a>
<a id='n203' href='#n203'>203</a>
<a id='n204' href='#n204'>204</a>
<a id='n205' href='#n205'>205</a>
<a id='n206' href='#n206'>206</a>
<a id='n207' href='#n207'>207</a>
<a id='n208' href='#n208'>208</a>
<a id='n209' href='#n209'>209</a>
<a id='n210' href='#n210'>210</a>
<a id='n211' href='#n211'>211</a>
<a id='n212' href='#n212'>212</a>
<a id='n213' href='#n213'>213</a>
<a id='n214' href='#n214'>214</a>
<a id='n215' href='#n215'>215</a>
<a id='n216' href='#n216'>216</a>
<a id='n217' href='#n217'>217</a>
<a id='n218' href='#n218'>218</a>
<a id='n219' href='#n219'>219</a>
<a id='n220' href='#n220'>220</a>
<a id='n221' href='#n221'>221</a>
<a id='n222' href='#n222'>222</a>
<a id='n223' href='#n223'>223</a>
<a id='n224' href='#n224'>224</a>
<a id='n225' href='#n225'>225</a>
<a id='n226' href='#n226'>226</a>
<a id='n227' href='#n227'>227</a>
<a id='n228' href='#n228'>228</a>
<a id='n229' href='#n229'>229</a>
<a id='n230' href='#n230'>230</a>
<a id='n231' href='#n231'>231</a>
<a id='n232' href='#n232'>232</a>
<a id='n233' href='#n233'>233</a>
<a id='n234' href='#n234'>234</a>
<a id='n235' href='#n235'>235</a>
<a id='n236' href='#n236'>236</a>
<a id='n237' href='#n237'>237</a>
<a id='n238' href='#n238'>238</a>
<a id='n239' href='#n239'>239</a>
<a id='n240' href='#n240'>240</a>
<a id='n241' href='#n241'>241</a>
<a id='n242' href='#n242'>242</a>
<a id='n243' href='#n243'>243</a>
<a id='n244' href='#n244'>244</a>
<a id='n245' href='#n245'>245</a>
<a id='n246' href='#n246'>246</a>
<a id='n247' href='#n247'>247</a>
<a id='n248' href='#n248'>248</a>
<a id='n249' href='#n249'>249</a>
<a id='n250' href='#n250'>250</a>
<a id='n251' href='#n251'>251</a>
<a id='n252' href='#n252'>252</a>
<a id='n253' href='#n253'>253</a>
<a id='n254' href='#n254'>254</a>
<a id='n255' href='#n255'>255</a>
<a id='n256' href='#n256'>256</a>
<a id='n257' href='#n257'>257</a>
<a id='n258' href='#n258'>258</a>
<a id='n259' href='#n259'>259</a>
<a id='n260' href='#n260'>260</a>
</pre></td>
<td class='lines'><pre><code>