--- a/configs/mt7623a_unielec_u7623_02_defconfig +++ b/configs/mt7623a_unielec_u7623_02_defconfig @@ -4,51 +4,135 @@ CONFIG_ARCH_MEDIATEK=y CONFIG_SYS_TEXT_BASE=0x81e00000 CONFIG_SYS_MALLOC_F_LEN=0x4000 CONFIG_NR_DRAM_BANKS=1 -CONFIG_ENV_SIZE=0x1000 +CONFIG_ENV_SIZE=0x10000 CONFIG_ENV_OFFSET=0x100000 CONFIG_DEFAULT_DEVICE_TREE="mt7623a-unielec-u7623-02-emmc" +CONFIG_USE_DEFAULT_ENV_FILE=y CONFIG_TARGET_MT7623=y CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x84000000 CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y +CONFIG_FIT_ENABLE_SHA256_SUPPORT=y +CONFIG_LED=y +CONFIG_LED_BLINK=y +CONFIG_LED_GPIO=y +CONFIG_LOGLEVEL=7 +CONFIG_LOG=y +CONFIG_AUTOBOOT_KEYED=y +CONFIG_AUTOBOOT_MENU_SHOW=y +CONFIG_BOARD_LATE_INIT=y CONFIG_BOOTDELAY=3 +CONFIG_BOOTP_SEND_HOSTNAME=y CONFIG_DEFAULT_FDT_FILE="mt7623a-unielec-u7623-02-emmc.dtb" CONFIG_SYS_CONSOLE_IS_IN_ENV=y +CONFIG_DEFAULT_ENV_FILE="unielec_u7623-02_env" +CONFIG_BUTTON=y +CONFIG_BUTTON_GPIO=y +CONFIG_RESET_BUTTON_LABEL="factory" +CONFIG_CFB_CONSOLE_ANSI=y +CONFIG_CMD_ENV_FLAGS=y # CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_PROMPT="MT7623> " CONFIG_CMD_BOOTMENU=y +CONFIG_CMD_BOOTP=y +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_BUTTON=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_CDP=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_DM=y +CONFIG_CMD_DNS=y +CONFIG_CMD_ECHO=y +CONFIG_CMD_ENV_READMEM=y +CONFIG_CMD_ERASEENV=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_CMD_FS_UUID=y # CONFIG_CMD_ELF is not set # CONFIG_CMD_XIMG is not set CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y +# CONFIG_CMD_GPT is not set +CONFIG_CMD_HASH=y +CONFIG_CMD_ITEST=y +CONFIG_CMD_LED=y +CONFIG_CMD_LICENSE=y +CONFIG_CMD_LINK_LOCAL=y +CONFIG_CMD_MBR=y CONFIG_CMD_MMC=y -CONFIG_CMD_READ=y -# CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set -CONFIG_ENV_IS_IN_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_SF_TEST=y +CONFIG_CMD_PING=y +CONFIG_CMD_PXE=y +CONFIG_CMD_PWM=y +CONFIG_CMD_SMC=y +CONFIG_CMD_TFTPBOOT=y +CONFIG_CMD_TFTPSRV=y +CONFIG_CMD_ASKENV=y +CONFIG_CMD_PART=y +CONFIG_CMD_RARP=y +CONFIG_CMD_SATA=y +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_SLEEP=y +CONFIG_CMD_SNTP=y +CONFIG_CMD_SOURCE=y +CONFIG_CMD_STRINGS=y +CONFIG_CMD_USB=y +CONFIG_CMD_UUID=y +CONFIG_CMD_READ=y +CONFIG_CMD_SCSI=y +CONFIG_DISPLAY_CPUINFO=y +CONFIG_DM_ETH=y +CONFIG_DM_GPIO=y +CONFIG_DM_SCSI=y +CONFIG_DM_MMC=y +CONFIG_DM_MTD=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_SERIAL=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_USB=y +CONFIG_DM_PCI=y +CONFIG_DM_PWM=y +CONFIG_AHCI=y +CONFIG_AHCI_PCI=y +CONFIG_SCSI_AHCI=y +CONFIG_SCSI=y +CONFIG_PWM_MTK=y +CONFIG_HUSH_PARSER=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SYS_MMC_ENV_DEV=0 +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_MMC=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_NETCONSOLE=y CONFIG_REGMAP=y CONFIG_SYSCON=y CONFIG_CLK=y +CONFIG_LZMA=y +CONFIG_MEDIATEK_ETH=y # CONFIG_MMC_QUIRKS is not set CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_HS400_SUPPORT=y CONFIG_MMC_MTK=y +CONFIG_MTK_POWER_DOMAIN=y +CONFIG_MTK_SERIAL=y +CONFIG_MTK_TIMER=y +CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_PARTITION_UUIDS=y +CONFIG_PCI=y +CONFIG_PCIE_MEDIATEK=y +CONFIG_PHY=y CONFIG_PHY_FIXED=y -CONFIG_DM_ETH=y -CONFIG_MEDIATEK_ETH=y CONFIG_PINCTRL=y CONFIG_PINCONF=y CONFIG_PINCTRL_MT7623=y CONFIG_POWER_DOMAIN=y -CONFIG_MTK_POWER_DOMAIN=y -CONFIG_DM_SERIAL=y -CONFIG_MTK_SERIAL=y +CONFIG_RANDOM_UUID=y +CONFIG_REGEX=y CONFIG_SYSRESET=y CONFIG_SYSRESET_WATCHDOG=y CONFIG_TIMER=y -CONFIG_MTK_TIMER=y +CONFIG_VERSION_VARIABLE=y CONFIG_WDT_MTK=y -CONFIG_LZMA=y --- /dev/null +++ b/unielec_u7623-02_env @@ -0,0 +1,47 @@ +ipaddr=192.168.1.1 +serverip=192.168.1.254 +loadaddr=0x88000000 +dtaddr=0x83f00000 +console=earlycon=uart8250,mmio32,0x11004000 console=ttyS0,115200 +initrd_high=0xafffffff +part_default=3 +part_recovery=2 +bootcmd=run boot_mmc +bootdelay=0 +bootfile=openwrt-mediatek-mt7623-unielec_u7623-02-initramfs-recovery.itb +bootfile_upg=openwrt-mediatek-mt7623-unielec_u7623-02-squashfs-sysupgrade.itb +bootled_rec=u7623-01:green:led3 +bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60 +bootmenu_default=0 +bootmenu_delay=0 +bootmenu_title= ( ( ( OpenWrt ) ) ) +bootmenu_0=Initialize environment.=run _firstboot +bootmenu_0d=Run default boot command.=run boot_default +bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return +bootmenu_2=Boot production system from eMMC.=run boot_production ; run bootmenu_confirm_return +bootmenu_3=Boot recovery system from eMMC.=run boot_recovery ; run bootmenu_confirm_return +bootmenu_4=Load production system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return +bootmenu_5=Load recovery system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return +bootmenu_6=Reboot.=reset +bootmenu_7=Reset all settings to factory defaults.=run reset_factory ; reset +boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever +boot_first=if button factory ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu +boot_production=run emmc_read_production && bootm $loadaddr +boot_recovery=run emmc_read_recovery && bootm $loadaddr +boot_tftp_forever=led bpi-r64:pio:blue on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done +boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run emmc_write_production ; if env exists noboot ; then else bootm $loadaddr ; fi +boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run emmc_write_recovery ; if env exists noboot ; then else bootm $loadaddr ; fi +boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr +boot_mmc=run boot_production ; run boot_recovery +emmc_write_production=mmc dev 0 0 ; iminfo $loadaddr && part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol +emmc_write_recovery=mmc dev 0 0 ; iminfo $loadaddr && part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol +emmc_read_production=mmc dev 0 0 ; part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_read_vol +emmc_read_recovery=mmc dev 0 0 ; part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_read_vol +mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$part_size && mmc write $loadaddr 0x$part_addr 0x$image_size +mmc_read_vol=mmc read $loadaddr $part_addr 0x8 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr 0x$part_addr 0x$image_size && setexpr filesize $image_size * 0x200 +reset_factory=eraseenv && reset +_init_env=setenv _init_env ; saveenv ; saveenv +_firstboot=setenv _firstboot ; run _switch_to_menu _update_bootdev _init_env boot_first +_update_bootdev=setenv _update_bootdev ; setenv bootargs "$console root=/dev/mmcblk0p65" +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title $ver"