--- a/configs/mt7623n_bpir2_defconfig +++ b/configs/mt7623n_bpir2_defconfig @@ -7,35 +7,105 @@ CONFIG_SYS_MALLOC_F_LEN=0x4000 CONFIG_NR_DRAM_BANKS=1 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x81ffff10 -CONFIG_ENV_SIZE=0x1000 +CONFIG_ENV_SIZE=0x10000 CONFIG_ENV_OFFSET=0x100000 CONFIG_DEFAULT_DEVICE_TREE="mt7623n-bananapi-bpi-r2" -CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_USE_DEFAULT_ENV_FILE=y +CONFIG_SYS_PROMPT="MT7623> " CONFIG_TARGET_MT7623=y CONFIG_SYS_LOAD_ADDR=0x84000000 CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y +CONFIG_FIT_ENABLE_SHA256_SUPPORT=y +CONFIG_LED=y +CONFIG_LED_BLINK=y +CONFIG_LED_GPIO=y +CONFIG_LOGLEVEL=7 +CONFIG_LOG=y +CONFIG_AUTOBOOT_KEYED=y +CONFIG_AUTOBOOT_MENU_SHOW=y +CONFIG_BOARD_LATE_INIT=y +# CONFIG_BOOTSTD is not set +# CONFIG_BOOT_DEFAULTS is not set CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=3 +CONFIG_BOOTP_SEND_HOSTNAME=y CONFIG_DEFAULT_FDT_FILE="mt7623n-bananapi-bpi-r2.dtb" CONFIG_SYS_CONSOLE_IS_IN_ENV=y +CONFIG_DEFAULT_ENV_FILE="bananapi_bpi-r2_env" +CONFIG_BUTTON=y +CONFIG_BUTTON_GPIO=y +CONFIG_RESET_BUTTON_LABEL="factory" +CONFIG_CFB_CONSOLE_ANSI=y +CONFIG_CMD_ENV_FLAGS=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_MAXARGS=8 CONFIG_SYS_PBSIZE=1049 CONFIG_SYS_BOOTM_LEN=0x4000000 CONFIG_CMD_BOOTMENU=y +CONFIG_CMD_BOOTP=y +CONFIG_CMD_BUTTON=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_CDP=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_DM=y +CONFIG_CMD_DNS=y +CONFIG_CMD_ECHO=y +CONFIG_CMD_ENV_READMEM=y +CONFIG_CMD_ERASEENV=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_CMD_FS_UUID=y # CONFIG_CMD_ELF is not set # CONFIG_CMD_XIMG is not set CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y +# CONFIG_CMD_GPT is not set +CONFIG_CMD_HASH=y +CONFIG_CMD_ITEST=y +CONFIG_CMD_LED=y +CONFIG_CMD_LICENSE=y +CONFIG_CMD_LINK_LOCAL=y +CONFIG_CMD_MBR=y CONFIG_CMD_MMC=y CONFIG_CMD_READ=y -# CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set +CONFIG_CMD_SF_TEST=y +CONFIG_CMD_PING=y +CONFIG_CMD_PXE=y +CONFIG_CMD_TFTPBOOT=y +CONFIG_CMD_TFTPSRV=y +CONFIG_CMD_ASKENV=y +CONFIG_CMD_PART=y +CONFIG_CMD_RARP=y +CONFIG_CMD_SATA=y +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_SLEEP=y +CONFIG_CMD_SNTP=y +CONFIG_CMD_SOURCE=y +CONFIG_CMD_STRINGS=y +CONFIG_CMD_USB=y +CONFIG_CMD_UUID=y +CONFIG_CMD_SCSI=y +CONFIG_DISPLAY_CPUINFO=y +CONFIG_DM_ETH=y +CONFIG_DM_GPIO=y +CONFIG_DM_SCSI=y +CONFIG_DM_MMC=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_USB=y +CONFIG_DM_PCI=y +CONFIG_AHCI=y +CONFIG_AHCI_PCI=y +CONFIG_SCSI_AHCI=y +CONFIG_SCSI=y +CONFIG_HUSH_PARSER=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_NETCONSOLE=y CONFIG_USE_IPADDR=y CONFIG_IPADDR="192.168.1.1" CONFIG_USE_SERVERIP=y @@ -47,6 +117,12 @@ CONFIG_CLK=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_HS400_SUPPORT=y CONFIG_MMC_MTK=y +CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_PARTITION_UUIDS=y +CONFIG_PCI=y +CONFIG_PCIE_MEDIATEK=y +CONFIG_PHY=y +CONFIG_PINCONF=y CONFIG_PHY_FIXED=y CONFIG_MEDIATEK_ETH=y CONFIG_PINCTRL=y @@ -56,10 +132,13 @@ CONFIG_POWER_DOMAIN=y CONFIG_MTK_POWER_DOMAIN=y CONFIG_DM_SERIAL=y CONFIG_MTK_SERIAL=y +CONFIG_RANDOM_UUID=y +CONFIG_REGEX=y CONFIG_SYSRESET=y CONFIG_SYSRESET_WATCHDOG=y CONFIG_TIMER=y CONFIG_MTK_TIMER=y +CONFIG_VERSION_VARIABLE=y CONFIG_WDT_MTK=y CONFIG_LZMA=y # CONFIG_EFI_GRUB_ARM32_WORKAROUND is not set --- /dev/null +++ b/bananapi_bpi-r2_env @@ -0,0 +1,70 @@ +ipaddr=192.168.1.1 +serverip=192.168.1.254 +loadaddr=0x88000000 +dtaddr=0x83f00000 +console=earlycon=uart8250,mmio32,0x11004000 console=ttyS2,115200 console=tty1 +initrd_high=0xafffffff +part_default=3 +part_recovery=2 +bootcmd=run boot_mmc +bootdelay=0 +bootfile=openwrt-mediatek-mt7623-bananapi_bpi-r2-initramfs-recovery.itb +bootfile_upg=openwrt-mediatek-mt7623-bananapi_bpi-r2-squashfs-sysupgrade.itb +bootled_pwr=bpi-r2:pio:green +bootled_rec=bpi-r2:pio:blue +bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60 +bootmenu_default=0 +bootmenu_delay=0 +bootmenu_title= ( ( ( OpenWrt ) ) ) +bootmenu_0=Initialize environment.=run _firstboot +bootmenu_0d=Run default boot command.=run boot_default +bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return +boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever +boot_first=if button factory ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu +boot_tftp_forever=led bpi-r2:pio:blue on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done +boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run mmc_write_production ; if env exists noboot ; then else bootm $loadaddr ; fi +boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run mmc_write_recovery ; if env exists noboot ; then else bootm $loadaddr ; fi +boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr +boot_mmc=run boot_production ; run boot_recovery +emmc_init=run emmc_init_bl && run emmc_init_openwrt ; env default bootcmd ; saveenv +emmc_init_bl=run sdmmc_read_emmc_hdr && run emmc_write_hdr && run sdmmc_read_preloader && run emmc_write_preloader && run sdmmc_read_uboot && run emmc_write_uboot +emmc_init_openwrt=run sdmmc_read_recovery && run emmc_write_recovery ; run sdmmc_read_production && run emmc_write_production +emmc_write_hdr=mmc dev 0 0 ; mmc erase 0x0 0x2000 ; mmc write $loadaddr 0x0 0x4 ; mmc dev 0 1 ; mmc partconf 0 1 1 1 ; mmc erase 0x0 0x400 ; mmc write $loadaddr 0x0 0x4 ; mmc partconf 0 1 1 0 +emmc_write_preloader=mmc dev 0 1 ; mmc partconf 0 1 1 1 ; mmc write $loadaddr 0x4 0x100 ; mmc partconf 0 1 1 0 +emmc_write_uboot=mmc dev 0 0 ; part size mmc 0 1 part_size && part start mmc 0 1 part_addr && mmc write $loadaddr $part_addr 0x400 +emmc_write_production=mmc dev 0 0 ; iminfo $loadaddr && part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol +emmc_write_recovery=mmc dev 0 0 ; iminfo $loadaddr && part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol +emmc_read_production=mmc dev 0 0 ; part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_read_vol +emmc_read_recovery=mmc dev 0 0 ; part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_read_vol +mmc_write_production=if test "$bootedfrom" = "SD" ; then run sdmmc_write_production ; else run emmc_write_production ; fi +mmc_write_recovery=if test "$bootedfrom" = "SD" ; run sdmmc_write_recovery ; else run emmc_write_recovery ; fi +mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$image_size && mmc write $loadaddr 0x$part_addr 0x$image_size +mmc_read_vol=mmc read $loadaddr $part_addr 0x8 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr 0x$part_addr 0x$image_size && setexpr filesize $image_size * 0x200 +reset_factory=eraseenv && reset +sdmmc_read_emmc_hdr=mmc dev 1 && mmc read $loadaddr 0x1ff8 0x8 +sdmmc_read_preloader=mmc dev 1 && mmc read $loadaddr 0x4 0x100 +sdmmc_read_uboot=mmc dev 1 ; part start mmc 1 1 part_addr && part size mmc 1 1 part_size && mmc read $loadaddr $part_addr $part_size +sdmmc_read_production=mmc dev 1 ; part start mmc 1 $part_default part_addr && part size mmc 1 $part_default part_size && run mmc_read_vol +sdmmc_read_recovery=mmc dev 1 ; part start mmc 1 $part_recovery part_addr && part size mmc 1 $part_recovery part_size && run mmc_read_vol +sdmmc_write_production=iminfo $fileaddr && mmc dev 1 && part start mmc 1 $part_default part_addr && part size mmc 1 $part_default part_size && run mmc_write_vol +sdmmc_write_recovery=iminfo $fileaddr && mmc dev 1 && part start mmc 1 $part_recovery part_addr && part size mmc 1 $part_recovery part_size && run mmc_write_vol +_checkbootedfrom=setenv _checkbootedfrom ; if itest.l *81dffff0 == 434d4d65 ; then setenv bootedfrom eMMC ; else setenv bootedfrom SD ; fi +_init_env=setenv _init_env ; setenv _create_env ; saveenv ; saveenv +_firstboot=setenv _firstboot ; led $bootled_pwr off ;led $bootled_rec on ; run _checkbootedfrom _switch_to_menu _update_bootdev _update_bootcmd _update_bootcmd2 _init_env boot_first +_set_bootcmd_sdmmc=setenv boot_production "led $bootled_rec off ; led $bootled_pwr on ; run sdmmc_read_production && bootm $loadaddr ; led $bootled_pwr off" +_set_bootcmd_emmc=setenv boot_production "led $bootled_rec off ; led $bootled_pwr on ; run emmc_read_production && bootm $loadaddr ; led $bootled_pwr off" +_update_bootcmd=setenv _update_bootcmd ; if test "$bootedfrom" = "SD" ; then run _set_bootcmd_sdmmc ; else run _set_bootcmd_emmc ; fi ; setenv _set_bootcmd_sdmmc ; setenv _set_bootcmd_emmc +_set_bootcmd2_sdmmc=setenv boot_recovery "led $bootled_pwr off ; led $bootled_rec on ; run sdmmc_read_recovery && bootm $loadaddr ; led $bootled_rec off" +_set_bootcmd2_emmc=setenv boot_recovery "led $bootled_pwr off ; led $bootled_rec on ; run emmc_read_recovery && bootm $loadaddr ; led $bootled_rec off" +_update_bootcmd2=setenv _update_bootcmd2 ; if test "$bootedfrom" = "SD" ; then run _set_bootcmd2_sdmmc ; else run _set_bootcmd2_emmc ; fi ; setenv _set_bootcmd2_sdmmc ; setenv _set_bootcmd2_emmc +_update_bootdev=setenv _update_bootdev ; if test "$bootedfrom" = "SD" ; then setenv bootargs "$console root=/dev/mmcblk1p65" ; else setenv bootargs "$console root=/dev/mmcblk0p65" ; fi +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title [$bootedfrom] $ver" ; run _set_bm2 +_set_bm2=setenv _set_bm2 ; setenv bootmenu_2 "Boot production system from $bootedfrom.=run boot_production ; run bootmenu_confirm_return" ; run _set_bm3 +_set_bm3=setenv _set_bm3 ; setenv bootmenu_3 "Boot recovery system from $bootedfrom.=run boot_recovery ; run bootmenu_confirm_return" ; run _set_bm4 +_set_bm4=setenv _set_bm4 ; setenv bootmenu_4 "Load production system via TFTP then write to $bootedfrom.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return" ; run _set_bm5 +_set_bm5=setenv _set_bm5 ; setenv bootmenu_5 "Load recovery system via TFTP then write to $bootedfrom.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return" ; run _set_bm5a +_set_bm5a=setenv _set_bm5a ; if test "$bootedfrom" = "SD" ; then run _set_bm6 ; else setenv _set_bm6 ; setenv _menu_next 6 ; fi ; run _set_bmr +_set_bm6=setenv _set_bm6 ; setenv bootmenu_6 "Install bootloader, recovery and production to eMMC.=run emmc_init ; run bootmenu_confirm_return" ; setenv _menu_next 7 +_set_bmr=setenv _set_bmr ; setenv bootmenu_${_menu_next} "Reboot.=reset" ; setexpr _menu_next ${_menu_next} + 1 ; run _set_bmf +_set_bmf=setenv _set_bmf ; setenv bootmenu_${_menu_next} "Reset all settings to factory defaults.=run reset_factory ; reset" ; setenv _menu_next --- a/arch/arm/dts/mt7623n-bananapi-bpi-r2.dts +++ b/arch/arm/dts/mt7623n-bananapi-bpi-r2.dts @@ -6,6 +6,7 @@ */ /dts-v1/; +#include #include "mt7623.dtsi" #include "mt7623-u-boot.dtsi" @@ -66,6 +67,16 @@ default-state = "off"; }; }; + + gpio-keys { + compatible = "gpio-keys"; + + factory { + label = "factory"; + gpios = <&gpio 256 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; }; ð {