From c4110a524e9a026cf570b6dadf325c037b7527d0 Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Fri, 11 Sep 2020 18:09:33 +0200 Subject: ramips: create common DTSI for Sunvalley Filehub devices HooToo HT-TM05 and RAVPower RP-WD03 have almost identical hardware (except for RAM size) and are from the same vendor (SunValley). Create a common DTSI file for them. Suggested-by: Russell Morris Signed-off-by: Adrian Schmutzler --- target/linux/ramips/dts/mt7620n_hootoo_ht-tm05.dts | 130 +------------------- .../linux/ramips/dts/mt7620n_ravpower_rp-wd03.dts | 130 +------------------- .../ramips/dts/mt7620n_sunvalley_filehub.dtsi | 136 +++++++++++++++++++++ 3 files changed, 138 insertions(+), 258 deletions(-) create mode 100644 target/linux/ramips/dts/mt7620n_sunvalley_filehub.dtsi (limited to 'target') diff --git a/target/linux/ramips/dts/mt7620n_hootoo_ht-tm05.dts b/target/linux/ramips/dts/mt7620n_hootoo_ht-tm05.dts index d91986a68f..ce19ef79c2 100644 --- a/target/linux/ramips/dts/mt7620n_hootoo_ht-tm05.dts +++ b/target/linux/ramips/dts/mt7620n_hootoo_ht-tm05.dts @@ -1,10 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT /dts-v1/; -#include "mt7620n.dtsi" - -#include -#include +#include "mt7620n_sunvalley_filehub.dtsi" / { compatible = "hootoo,ht-tm05", "ralink,mt7620n-soc"; @@ -15,7 +12,6 @@ led-failsafe = &led_power; led-running = &led_power; led-upgrade = &led_power; - label-mac-device = ðernet; }; leds { @@ -33,128 +29,4 @@ linux,default-trigger = "phy0tpt"; }; }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - virtual_flash { - compatible = "mtd-concat"; - - devices = <&firmware1 &firmware2 &firmware3>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - compatible = "openwrt,okli"; - label = "firmware"; - reg = <0x0 0x0>; - }; - }; - }; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&i2c { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "config"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - label = "loader"; - reg = <0x50000 0x10000>; - read-only; - }; - - firmware2: partition@60000 { - label = "firmware2"; - reg = <0x60000 0x170000>; - }; - - partition@1d0000 { - label = "u-boot-env"; - reg = <0x1d0000 0x10000>; - }; - - firmware3: partition@1e0000 { - label = "firmware3"; - reg = <0x1e0000 0x20000>; - }; - - firmware1: partition@200000 { - label = "firmware1"; - reg = <0x200000 0x600000>; - }; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -ðernet { - mtd-mac-address = <&factory 0x28>; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0x0>; -}; - -&state_default { - gpio { - groups = "wled", "ephy"; - function = "gpio"; - }; }; diff --git a/target/linux/ramips/dts/mt7620n_ravpower_rp-wd03.dts b/target/linux/ramips/dts/mt7620n_ravpower_rp-wd03.dts index a5469b655e..305ac0bf20 100644 --- a/target/linux/ramips/dts/mt7620n_ravpower_rp-wd03.dts +++ b/target/linux/ramips/dts/mt7620n_ravpower_rp-wd03.dts @@ -1,16 +1,12 @@ /dts-v1/; -#include "mt7620n.dtsi" - -#include -#include +#include "mt7620n_sunvalley_filehub.dtsi" / { compatible = "ravpower,rp-wd03", "ralink,mt7620n-soc"; model = "RAVPower RP-WD03"; aliases { - label-mac-device = ðernet; led-boot = &led_wifi_blue; led-failsafe = &led_wifi_blue; led-running = &led_wifi_blue; @@ -30,128 +26,4 @@ gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; }; }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - virtual_flash { - compatible = "mtd-concat"; - - devices = <&firmware1 &firmware2 &firmware3>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - compatible = "openwrt,okli"; - label = "firmware"; - reg = <0x0 0x0>; - }; - }; - }; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&i2c { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "config"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - label = "loader"; - reg = <0x50000 0x10000>; - read-only; - }; - - firmware2: partition@60000 { - label = "firmware2"; - reg = <0x60000 0x170000>; - }; - - partition@1d0000 { - label = "u-boot-env"; - reg = <0x1d0000 0x10000>; - }; - - firmware3: partition@1e0000 { - label = "firmware3"; - reg = <0x1e0000 0x20000>; - }; - - firmware1: partition@200000 { - label = "firmware1"; - reg = <0x200000 0x600000>; - }; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -ðernet { - mtd-mac-address = <&factory 0x28>; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0x0>; -}; - -&state_default { - gpio { - groups = "wled", "ephy"; - function = "gpio"; - }; }; diff --git a/target/linux/ramips/dts/mt7620n_sunvalley_filehub.dtsi b/target/linux/ramips/dts/mt7620n_sunvalley_filehub.dtsi new file mode 100644 index 0000000000..d94379a41f --- /dev/null +++ b/target/linux/ramips/dts/mt7620n_sunvalley_filehub.dtsi @@ -0,0 +1,136 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7620n.dtsi" + +#include +#include + +/ { + aliases { + label-mac-device = ðernet; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + virtual_flash { + compatible = "mtd-concat"; + + devices = <&firmware1 &firmware2 &firmware3>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + compatible = "openwrt,okli"; + label = "firmware"; + reg = <0x0 0x0>; + }; + }; + }; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&i2c { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "config"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "loader"; + reg = <0x50000 0x10000>; + read-only; + }; + + firmware2: partition@60000 { + label = "firmware2"; + reg = <0x60000 0x170000>; + }; + + partition@1d0000 { + label = "u-boot-env"; + reg = <0x1d0000 0x10000>; + }; + + firmware3: partition@1e0000 { + label = "firmware3"; + reg = <0x1e0000 0x20000>; + }; + + firmware1: partition@200000 { + label = "firmware1"; + reg = <0x200000 0x600000>; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x28>; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0x0>; +}; + +&state_default { + gpio { + groups = "wled", "ephy"; + function = "gpio"; + }; +}; -- cgit v1.2.3