From 9cf1d4e06e836d0a6270bb70f6aee5ba5c607f18 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Mon, 23 Jan 2012 10:23:32 +0000 Subject: ramips: scripts updates In this patch: * rename Argus leds to avoid underscores * rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235 * remove Belkin F5D8235 v1 status led defined as storage led (it was defined as usb led earlier, just in wrong place) - it should have router led as in v2 * add Argus, Sparklan and Belkin F5D8235 v2 status leds * add Belkin F5D8235 v1 and v2 usb leds * fix Belkin F5D8235 v2 network config generation and mac address axtraction * fix Sparklan board identification * add Sparklan usb led (this board doesn't have usb connector by default and the led is hidden also but if you are going to solder the connector then you'll see the led too) * add Sparklan network config generation and mac address extraction * fix empty string test in network script and... * ...sort case entries by the first board in the list Signed-off-by: Roman Yeryomin SVN-Revision: 29871 --- target/linux/ramips/base-files/etc/diag.sh | 10 ++++-- .../linux/ramips/base-files/etc/uci-defaults/leds | 9 +++++ .../ramips/base-files/etc/uci-defaults/network | 41 +++++++++++++--------- target/linux/ramips/base-files/lib/ramips.sh | 2 +- .../arch/mips/ralink/rt288x/mach-f5d8235-v1.c | 4 +-- .../arch/mips/ralink/rt305x/mach-argus-atp52b.c | 4 +-- 6 files changed, 47 insertions(+), 23 deletions(-) (limited to 'target') diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index b38f1a5ac7..bbadc3206e 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -30,14 +30,17 @@ status_led_off() { get_status_led() { case $(ramips_board_name) in + argus-atp52b) + status_led="argus-atp52b:green:run" + ;; dir-300-b1 | dir-600-b1 | dir-600-b2) status_led="d-link:green:status" ;; esr-9753) status_led="esr-9753:orange:power" ;; - f5d8235-v1) - status_led="f5d8234-v1:blue:storage" + f5d8235-v2) + status_led="f5d8235v2:blue:router" ;; fonera20n) status_led="fonera20n:green:power" @@ -69,6 +72,9 @@ get_status_led() { w502u) status_led="alfa:blue:wps" ;; + wcr-150gn) + status_led="wcr150gn:amber:power" + ;; whr-g300n) status_led="whr-g300n:green:router" ;; diff --git a/target/linux/ramips/base-files/etc/uci-defaults/leds b/target/linux/ramips/base-files/etc/uci-defaults/leds index 0877a1d25e..02d522a6d8 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/leds +++ b/target/linux/ramips/base-files/etc/uci-defaults/leds @@ -39,6 +39,12 @@ case $board in esr-9753) set_wifi_led "rt2800pci-phy0::radio" ;; + f5d8235-v1) + set_usb_led "f5d8235-v1:blue:storage" + ;; + f5d8235-v2) + set_usb_led "f5d8235v2:blue:storage" + ;; fonera20n) set_usb_led "fonera20n:amber:usb" ;; @@ -55,4 +61,7 @@ case $board in set_usb_led "alfa:blue:usb" set_wifi_led "rt2800pci-phy0::radio" ;; + wcr-150gn) + set_usb_led "wcr150gn:amber:user" + ;; esac diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network index 7e58ef043e..89a3e359ad 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/network +++ b/target/linux/ramips/base-files/etc/uci-defaults/network @@ -18,12 +18,20 @@ ramips_setup_interfaces() case $board in argus-atp52b | \ b2c | \ - f5d8235-v2 | \ nw718 | \ w502u) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ;; + f5d8235-v1 | \ + rt-n15) + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + ucidef_add_switch "rtl8366s" "1" "1" + ucidef_add_switch_vlan "rtl8366s" "1" "1 2 3 4 5t" + ucidef_add_switch_vlan "rtl8366s" "2" "0 5t" + ;; + + f5d8235-v2 | \ wl-351) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "rtl8366rb" "1" "1" @@ -31,16 +39,12 @@ ramips_setup_interfaces() ucidef_add_switch_vlan "rtl8366rb" "2" "4 5t" ;; - wli-tx4-ag300n) - ucidef_set_interface_lan "eth0" + wcr-150gn) + ucidef_set_interface_lan_wan "eth0.2" "eth0.1" ;; - f5d8235-v1 | \ - rt-n15) - ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" - ucidef_add_switch "rtl8366s" "1" "1" - ucidef_add_switch_vlan "rtl8366s" "1" "1 2 3 4 5t" - ucidef_add_switch_vlan "rtl8366s" "2" "0 5t" + wli-tx4-ag300n) + ucidef_set_interface_lan "eth0" ;; *) @@ -61,11 +65,6 @@ ramips_setup_macs() local wan_mac="" case $board in - f5d8235-v2) - lan_mac=$(ramips_get_mac_nvram "u-boot" 262148) - wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1) - ;; - argus-atp52b | \ b2c | \ f5d8235-v1 | \ @@ -89,19 +88,29 @@ ramips_setup_macs() wan_mac=$(ramips_get_mac_binary factory 40) ;; + f5d8235-v2) + lan_mac=$(ramips_get_mac_binary "u-boot" 262148) + wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1) + ;; + w502u) lan_mac=$(ramips_get_mac_binary factory 40) wan_mac=$(ramips_get_mac_binary factory 46) ;; + wcr-150gn) + lan_mac=$(ramips_get_mac_binary factory 4) + wan_mac=$(ramips_get_mac_binary factory 40) + ;; + wli-tx4-ag300n) lan_mac=$(ramips_get_mac_binary factory 4) ;; esac - [ -n $lan_mac ] && ucidef_set_interface_macaddr lan $lan_mac - [ -n $wan_mac ] && ucidef_set_interface_macaddr wan $wan_mac + [ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan $lan_mac + [ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan $wan_mac } [ -e /etc/config/network ] && exit 0 diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 0a336eaece..dca2d1d91b 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -98,7 +98,7 @@ ramips_board_name() { *"RT-N15") name="rt-n15" ;; - *"WCR-150GN") + *"Sparklan WCR-150GN") name="wcr-150gn" ;; *"V22RW-2X2") diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-f5d8235-v1.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-f5d8235-v1.c index 7db7e6f331..db45cc87f2 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-f5d8235-v1.c +++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-f5d8235-v1.c @@ -86,11 +86,11 @@ static struct platform_device f5d8235_rtl8366s_device = { static struct gpio_led f5d8235_leds_gpio[] __initdata = { { - .name = "f5d8234-v1:blue:storage", + .name = "f5d8235-v1:blue:storage", .gpio = F5D8235_GPIO_LED_USB_BLUE, .active_low = 1, },{ - .name = "f5d8234-v1:orange:storage", + .name = "f5d8235-v1:orange:storage", .gpio = F5D8235_GPIO_LED_USB_ORANGE, .active_low = 1, } diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-argus-atp52b.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-argus-atp52b.c index cc48799412..be65690754 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-argus-atp52b.c +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-argus-atp52b.c @@ -31,12 +31,12 @@ static struct gpio_led argus_atp52b_leds_gpio[] __initdata = { { - .name = "argus_atp52b:green:run", + .name = "argus-atp52b:green:run", .gpio = ARGUS_ATP52B_GPIO_LED_RUN, .active_low = 1, }, { - .name = "argus_atp52b:amber:net", + .name = "argus-atp52b:amber:net", .gpio = ARGUS_ATP52B_GPIO_LED_NET, .active_low = 1, } -- cgit v1.2.3