From 72c39970039fa46ad95cf304e8f75c73b2627092 Mon Sep 17 00:00:00 2001 From: Robert Marko Date: Tue, 3 Mar 2020 20:19:31 +0100 Subject: ipq40xx: 5.4: fix ethernet driver In 5.4 kernel old u32 array way of setting network features was dropped and linkmode is now the only way. So lets migrate the EDMA driver to support linkmode. Also, old get/set settings API for ethtool is also dropped so lets convert to new ksettings API while at it as it demands linkmode. Now, gigabit works properly as well as ethtool. Previously you would get this in ethtool: root@OpenWrt:/# ethtool eth1 Settings for eth1: Supports Wake-on: d Wake-on: d Current message level: 0x00000000 (0) Link detected: yes Now, features are properly advertised: root@OpenWrt:/# ethtool eth1 Settings for eth1: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Link partner advertised pause frame use: No Link partner advertised auto-negotiation: No Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 4 Transceiver: internal Auto-negotiation: on MDI-X: Unknown Supports Wake-on: d Wake-on: d Current message level: 0x00000000 (0) Link detected: yes Signed-off-by: Robert Marko --- .../net/ethernet/qualcomm/essedma/edma_ethtool.c | 65 ++++++++++++---------- 1 file changed, 36 insertions(+), 29 deletions(-) (limited to 'target') diff --git a/target/linux/ipq40xx/files-5.4/drivers/net/ethernet/qualcomm/essedma/edma_ethtool.c b/target/linux/ipq40xx/files-5.4/drivers/net/ethernet/qualcomm/essedma/edma_ethtool.c index 8f6e3833b6..1270e20a90 100644 --- a/target/linux/ipq40xx/files-5.4/drivers/net/ethernet/qualcomm/essedma/edma_ethtool.c +++ b/target/linux/ipq40xx/files-5.4/drivers/net/ethernet/qualcomm/essedma/edma_ethtool.c @@ -180,9 +180,8 @@ static uint32_t edma_get_msglevel(struct net_device *netdev) /* edma_get_settings() * Get edma settings */ -#if 0 static int edma_get_settings(struct net_device *netdev, - struct ethtool_cmd *ecmd) + struct ethtool_link_ksettings *cmd) { struct edma_adapter *adapter = netdev_priv(netdev); @@ -196,38 +195,46 @@ static int edma_get_settings(struct net_device *netdev, phydev = adapter->phydev; - ecmd->advertising = phydev->advertising; - ecmd->autoneg = phydev->autoneg; + linkmode_copy(cmd->link_modes.advertising, phydev->advertising); + linkmode_copy(cmd->link_modes.supported, phydev->supported); + + cmd->base.autoneg = phydev->autoneg; if (adapter->link_state == __EDMA_LINKDOWN) { - ecmd->speed = SPEED_UNKNOWN; - ecmd->duplex = DUPLEX_UNKNOWN; + cmd->base.speed = SPEED_UNKNOWN; + cmd->base.duplex = DUPLEX_UNKNOWN; } else { - ecmd->speed = phydev->speed; - ecmd->duplex = phydev->duplex; + cmd->base.speed = phydev->speed; + cmd->base.duplex = phydev->duplex; } - ecmd->phy_address = adapter->phy_mdio_addr; + cmd->base.phy_address = adapter->phy_mdio_addr; phyreg = (uint16_t)phy_read(adapter->phydev, MII_LPA); if (phyreg & LPA_10HALF) - ecmd->lp_advertising |= ADVERTISED_10baseT_Half; + linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, + cmd->link_modes.lp_advertising); if (phyreg & LPA_10FULL) - ecmd->lp_advertising |= ADVERTISED_10baseT_Full; + linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, + cmd->link_modes.lp_advertising); if (phyreg & LPA_100HALF) - ecmd->lp_advertising |= ADVERTISED_100baseT_Half; + linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, + cmd->link_modes.lp_advertising); if (phyreg & LPA_100FULL) - ecmd->lp_advertising |= ADVERTISED_100baseT_Full; + linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, + cmd->link_modes.lp_advertising); phyreg = (uint16_t)phy_read(adapter->phydev, MII_STAT1000); if (phyreg & LPA_1000HALF) - ecmd->lp_advertising |= ADVERTISED_1000baseT_Half; + linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, + cmd->link_modes.lp_advertising); if (phyreg & LPA_1000FULL) - ecmd->lp_advertising |= ADVERTISED_1000baseT_Full; + linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, + cmd->link_modes.lp_advertising); } else { /* If the speed/duplex for this GMAC is forced and we * are not polling for link state changes, return the @@ -238,14 +245,14 @@ static int edma_get_settings(struct net_device *netdev, if (!(adapter->poll_required)) { if (adapter->forced_speed != SPEED_UNKNOWN) { /* set speed and duplex */ - ethtool_cmd_speed_set(ecmd, SPEED_1000); - ecmd->duplex = DUPLEX_FULL; + cmd->base.speed = SPEED_1000; + cmd->base.duplex = DUPLEX_FULL; /* Populate capabilities advertised by self */ - ecmd->advertising = 0; - ecmd->autoneg = 0; - ecmd->port = PORT_TP; - ecmd->transceiver = XCVR_EXTERNAL; + linkmode_zero(cmd->link_modes.advertising); + cmd->base.autoneg = 0; + cmd->base.port = PORT_TP; + cmd->base.transceiver = XCVR_EXTERNAL; } else { /* non link polled and non * forced speed/duplex interface @@ -262,7 +269,7 @@ static int edma_get_settings(struct net_device *netdev, * Set EDMA settings */ static int edma_set_settings(struct net_device *netdev, - struct ethtool_cmd *ecmd) + const struct ethtool_link_ksettings *cmd) { struct edma_adapter *adapter = netdev_priv(netdev); struct phy_device *phydev = NULL; @@ -272,16 +279,16 @@ static int edma_set_settings(struct net_device *netdev, return -EPERM; phydev = adapter->phydev; - phydev->advertising = ecmd->advertising; - phydev->autoneg = ecmd->autoneg; - phydev->speed = ethtool_cmd_speed(ecmd); - phydev->duplex = ecmd->duplex; + linkmode_copy(phydev->advertising, cmd->link_modes.advertising); + linkmode_copy(phydev->supported, cmd->link_modes.supported); + phydev->autoneg = cmd->base.autoneg; + phydev->speed = cmd->base.speed; + phydev->duplex = cmd->base.duplex; genphy_config_aneg(phydev); return 0; } -#endif /* edma_get_coalesce * get interrupt mitigation @@ -356,8 +363,8 @@ static const struct ethtool_ops edma_ethtool_ops = { .get_msglevel = &edma_get_msglevel, .nway_reset = &edma_nway_reset, .get_wol = &edma_get_wol, -// .get_settings = &edma_get_settings, -// .set_settings = &edma_set_settings, + .get_link_ksettings = &edma_get_settings, + .set_link_ksettings = &edma_set_settings, .get_strings = &edma_get_strings, .get_sset_count = &edma_get_strset_count, .get_ethtool_stats = &edma_get_ethtool_stats, -- cgit v1.2.3