From 1e7c6381f0058e49caab8de54eaad4862732f95d Mon Sep 17 00:00:00 2001 From: David Bauer Date: Thu, 2 Jan 2020 03:11:39 +0100 Subject: ramips: convert TP-Link MT7620 boards to tpt trigger This converts all MediaTek MT7620 boards from TP-Link to use the now supported WiFi throughput LED trigger. This way, the LED state now covers all VAPs regardless of their name. Also align all single-WiFi LEDs to represent the state of the 2.4GHz radio. This was not always the case previously, as later-added support for the MT7610 altered the phy probing order. Signed-off-by: David Bauer --- target/linux/ramips/dts/mt7620a_tplink_archer-c2-v1.dts | 1 + target/linux/ramips/dts/mt7620a_tplink_archer-c20-v1.dts | 2 ++ target/linux/ramips/dts/mt7620a_tplink_archer-c20i.dts | 1 + target/linux/ramips/dts/mt7620a_tplink_archer-c50-v1.dts | 2 ++ target/linux/ramips/dts/mt7620a_tplink_archer-mr200.dts | 1 + target/linux/ramips/dts/mt7620a_tplink_re200-v1.dts | 2 +- target/linux/ramips/mt7620/base-files/etc/board.d/01_leds | 6 ------ 7 files changed, 8 insertions(+), 7 deletions(-) (limited to 'target') diff --git a/target/linux/ramips/dts/mt7620a_tplink_archer-c2-v1.dts b/target/linux/ramips/dts/mt7620a_tplink_archer-c2-v1.dts index 45752c095d..58e4b39b55 100644 --- a/target/linux/ramips/dts/mt7620a_tplink_archer-c2-v1.dts +++ b/target/linux/ramips/dts/mt7620a_tplink_archer-c2-v1.dts @@ -48,6 +48,7 @@ wlan { label = "archer-c2-v1:green:wlan"; gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; }; }; diff --git a/target/linux/ramips/dts/mt7620a_tplink_archer-c20-v1.dts b/target/linux/ramips/dts/mt7620a_tplink_archer-c20-v1.dts index 59e109c8a2..b1d3e23450 100644 --- a/target/linux/ramips/dts/mt7620a_tplink_archer-c20-v1.dts +++ b/target/linux/ramips/dts/mt7620a_tplink_archer-c20-v1.dts @@ -47,11 +47,13 @@ wlan5g { label = "archer-c20-v1:blue:wlan5g"; gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; }; wlan2g { label = "archer-c20-v1:blue:wlan2g"; gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; }; wps { diff --git a/target/linux/ramips/dts/mt7620a_tplink_archer-c20i.dts b/target/linux/ramips/dts/mt7620a_tplink_archer-c20i.dts index 707453d2b5..694528d749 100644 --- a/target/linux/ramips/dts/mt7620a_tplink_archer-c20i.dts +++ b/target/linux/ramips/dts/mt7620a_tplink_archer-c20i.dts @@ -38,6 +38,7 @@ wlan { label = "archer-c20i:blue:wlan"; gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; }; }; }; diff --git a/target/linux/ramips/dts/mt7620a_tplink_archer-c50-v1.dts b/target/linux/ramips/dts/mt7620a_tplink_archer-c50-v1.dts index ed2b00836e..ca03d2ed78 100644 --- a/target/linux/ramips/dts/mt7620a_tplink_archer-c50-v1.dts +++ b/target/linux/ramips/dts/mt7620a_tplink_archer-c50-v1.dts @@ -47,11 +47,13 @@ wlan5g { label = "archer-c50-v1:green:wlan5g"; gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; }; wlan2g { label = "archer-c50-v1:green:wlan2g"; gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; }; wps { diff --git a/target/linux/ramips/dts/mt7620a_tplink_archer-mr200.dts b/target/linux/ramips/dts/mt7620a_tplink_archer-mr200.dts index bc7825df00..dccced0f18 100644 --- a/target/linux/ramips/dts/mt7620a_tplink_archer-mr200.dts +++ b/target/linux/ramips/dts/mt7620a_tplink_archer-mr200.dts @@ -71,6 +71,7 @@ wlan { label = "archer-mr200:white:wlan"; gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; }; }; diff --git a/target/linux/ramips/dts/mt7620a_tplink_re200-v1.dts b/target/linux/ramips/dts/mt7620a_tplink_re200-v1.dts index 39fdc0af53..afc94c538c 100644 --- a/target/linux/ramips/dts/mt7620a_tplink_re200-v1.dts +++ b/target/linux/ramips/dts/mt7620a_tplink_re200-v1.dts @@ -53,7 +53,7 @@ wlan2g_green { label = "re200-v1:green:wlan2g"; gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy1radio"; + linux,default-trigger = "phy1tpt"; }; }; diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds index 02899d646d..fe6dfac50e 100755 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds @@ -168,28 +168,22 @@ zbtlink,zbt-we826-e) tplink,archer-c2-v1) ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch1" "0x1e" ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch1" "0x01" - set_wifi_led "$boardname:green:wlan" ;; tplink,archer-c20-v1) ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e" ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01" - ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:blue:wlan2g" "wlan0" ;; tplink,archer-c20i) ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e" ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01" - ucidef_set_led_wlan "wlan" "wlan" "$boardname:blue:wlan" "phy0radio" ;; tplink,archer-c50-v1) ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" - ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" wlan1 - set_wifi_led "$boardname:green:wlan5g" ;; tplink,archer-mr200) ucidef_set_led_netdev "lan" "lan" "$boardname:white:lan" "eth0.1" ucidef_set_led_netdev "wan" "wan" "$boardname:white:wan" "usb0" - set_wifi_led "$boardname:white:wlan" ;; tplink,re200-v1) ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0" -- cgit v1.2.3