From ee3120a9db780480e58199f6811c52896f494b1d Mon Sep 17 00:00:00 2001 From: Jeff Kletsky Date: Sun, 20 Jan 2019 14:48:09 -0800 Subject: ath79: fix GL.iNet AR300M family GPIOs/LEDs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Change the "status" LED to proper GPIO 12 and "red" naming. Remove GPIO 2 from definition as a USB LED. GPIO 2 is used to control power to the USB socket, not an LED. As such, PWM on the line or typical LED triggers are inappropriate. Users who wish to control the USB power for custom applications can manipulate the GPIO through code, or for example, export it through /sys/class/gpio/export. Runtime-tested:  GL.iNet AR300M-Lite Signed-off-by: Jeff Kletsky --- target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-) (limited to 'target/linux') diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi index 2a0c4385cd..fe986bdde0 100644 --- a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi +++ b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi @@ -41,13 +41,6 @@ leds { compatible = "gpio-leds"; - usb { - label = "gl-ar300m:green:usb"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - trigger-sources = <&hub_port>; - linux,default-trigger = "usbport"; - }; - wlan { label = "gl-ar300m:green:wlan"; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; @@ -60,8 +53,8 @@ }; led_status: status { - label = "gl-ar300m:green:status"; - gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + label = "gl-ar300m:red:status"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; }; }; }; @@ -78,11 +71,6 @@ #address-cells = <1>; #size-cells = <0>; status = "okay"; - - hub_port: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; }; &usb_phy { -- cgit v1.2.3