From e2db870398edcf5df7c23428505d8040eb5eecf8 Mon Sep 17 00:00:00 2001 From: Martin Kennedy Date: Sat, 13 Feb 2021 05:38:52 +0000 Subject: ath79: fix chip used for Meraki MR12 caldata_extract The original setup fails to trigger ART calibration data extraction for the AR9287. Instead, it would only have extracted calibration data for an internal WMAC chip which is not present on this board. Fixes: 55d2db0e8ceb ("ath79: add support for Meraki MR12") Signed-off-by: Martin Kennedy [commit title/message facelift] Signed-off-by: Adrian Schmutzler --- .../ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'target/linux') diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 2e520ac067..08d9e017a7 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -56,9 +56,6 @@ case "$FIRMWARE" in caldata_extract "calibrate" 0x1000 0x440 ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env0 RADIOADDR1) ;; - meraki,mr12) - caldata_extract "art" 0x11000 0xeb8 - ;; nec,wg800hp) caldata_extract "art" 0x1000 0x440 ath9k_patch_mac $(mtd_get_mac_text board_data 0x680) @@ -108,6 +105,9 @@ case "$FIRMWARE" in caldata_extract "calibrate" 0x5000 0x440 ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env0 RADIOADDR0) ;; + meraki,mr12) + caldata_extract "art" 0x11000 0xeb8 + ;; netgear,wnr2200-8m|\ netgear,wnr2200-16m|\ pcs,cap324|\ -- cgit v1.2.3