From 67b28148421a72532bc29f0b80c21d6aae2445f3 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sat, 7 Jan 2012 17:24:44 +0000 Subject: ar71xx: local mac support on the wndr3700 The wndr3700 at least has no eth0 mac address and usually leverages the first wireless device's mac when in a bridged scenario. If, however, you want to route, and not bridge the interfaces, you need a unique mac address for it. This patch sets the local bit on the mac address pulled from the wireless chip and uses the resulting address for eth0. Patch-by: Dave Taht SVN-Revision: 29675 --- .../linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) (limited to 'target/linux') diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c index cfd0ba90c9..c708b97d93 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c @@ -111,12 +111,23 @@ static struct platform_device wndr3700_rtl8366s_device = { } }; +/* + * The eth0 and wmac0 interfaces share the same MAC address which + * can lead to problems if operated unbridged. Set the locally + * administered bit on the eth0 MAC to make it unique. + */ + +static void __init wndr3700_init_local_mac(unsigned char *mac_base) +{ + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac_base, 0); + ar71xx_eth0_data.mac_addr[0] |= 0x02; +} + static void __init wndr3700_setup(void) { u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, - art + WNDR3700_ETH0_MAC_OFFSET, 0); + wndr3700_init_local_mac(art + WNDR3700_ETH0_MAC_OFFSET); ar71xx_eth0_pll_data.pll_1000 = 0x11110000; ar71xx_eth0_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev; ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -- cgit v1.2.3