From 341b1427fc247fd4c53f390f2f17258dcf052a50 Mon Sep 17 00:00:00 2001 From: Jo-Philipp Wich Date: Tue, 13 Feb 2018 15:37:49 +0100 Subject: ramips: properly map pvid for vlans with remapped vid on mt7530/762x switches Currently, untagged port primary vlan IDs are set to the VLAN table index, and not the actual VLAN ID, breaking configurations with IDs deviating from the VLAN index. Fix the issue by resolving the per-port pvid property to the target VLAN ID value before committing to the hardware. Fixes FS#991, FS#1147, FS#1341 Signed-off-by: Jo-Philipp Wich --- target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mt7530.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'target/linux/ramips') diff --git a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mt7530.c b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mt7530.c index e61f9fd8d3..21f892655a 100644 --- a/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mt7530.c +++ b/target/linux/ramips/files-4.9/drivers/net/ethernet/mtk/mt7530.c @@ -616,10 +616,16 @@ mt7530_apply_config(struct switch_dev *dev) /* Port Default PVID */ for (i = 0; i < MT7530_NUM_PORTS; i++) { + int vlan = priv->port_entries[i].pvid; + u16 pvid = 0; u32 val; + + if (vlan < MT7530_NUM_VLANS && priv->vlan_entries[vlan].member) + pvid = priv->vlan_entries[vlan].vid; + val = mt7530_r32(priv, REG_ESW_PORT_PPBV1(i)); val &= ~0xfff; - val |= priv->port_entries[i].pvid; + val |= pvid; mt7530_w32(priv, REG_ESW_PORT_PPBV1(i), val); } -- cgit v1.2.3