From 0d65177658dfec9fe99bbad4e37cf44f0642d831 Mon Sep 17 00:00:00 2001 From: Filip Moc Date: Wed, 18 Nov 2020 20:38:21 +0100 Subject: ramips: add support for TP-Link MR6400 v4 You can flash via tftp recovery: - serve tftp-recovery image as /tp_recovery.bin on 192.168.0.225/24 - connect to any ethernet port - power on the device while holding the reset button - wait at least 8 seconds before releasing reset button Flashing via OEM web interface does not work. LTE module does not support DHCP so it must be configured via QMI. Hardware Specification (v4.0 EU): - SoC: MT7628NN - Flash: Winbond W25Q64JVS (8MiB) - RAM: ESMT M14D5121632A (64MiB) - Wireless: SoC platform only (2.4GHz b/g/n, 2x internal antenna) - Ethernet: 1NIC (4x100M) - WWAN: TP-LINK LTE MODULE (2x external detachable antenna) - Power: DC 9V 0.85A Signed-off-by: Filip Moc --- target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds | 4 ++++ target/linux/ramips/mt76x8/base-files/etc/board.d/02_network | 4 ++++ 2 files changed, 8 insertions(+) (limited to 'target/linux/ramips/mt76x8') diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds index e1c3454237..4ed38bf5f2 100755 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds @@ -75,6 +75,10 @@ tplink,tl-wr842n-v5) ucidef_set_led_switch "lan" "lan" "green:lan" "switch0" "0x1e" ucidef_set_led_switch "wan" "wan" "green:wan" "switch0" "0x01" ;; +tplink,tl-mr6400-v4) + ucidef_set_led_switch "lan" "lan" "white:lan" "switch0" "0x0e" + ucidef_set_led_switch "wan" "wan" "white:wan" "switch0" "0x10" + ;; tplink,tl-wr841n-v13) ucidef_set_led_wlan "wlan2g" "wlan2g" "green:wlan" "phy0tpt" ucidef_set_led_switch "lan1" "lan1" "green:lan1" "switch0" "0x2" diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index a6272e5a55..a7e978a2e2 100755 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -112,6 +112,10 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0" ;; + tplink,tl-mr6400-v4) + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" + ;; tplink,tl-wr902ac-v3) ucidef_add_switch "switch0" \ "4:lan" "6@eth0" -- cgit v1.2.3