From b28443f82e4d83226a47f7b0d7ced06dff4f3350 Mon Sep 17 00:00:00 2001 From: Thomas Aldrian Date: Tue, 2 Nov 2021 19:10:39 +0000 Subject: ramips: add support for Wavlink WL-WN576A2 This commit adds support for the Wavlink WL-WN576A2 wall-plug wireles repeater / router. It is also sold under the name SilverCrest SWV 733 B1. Device specs: - CPU: MediaTek MT7628AN - Flash: 8MB - RAM: 64MB - Bootloader: U-Boot - Ethernet: 1x 10/100 Mbps - 2.4 GHz: b/g/n SoC - 5 GHz: a/n/ac MT7610EN - Buttons: WPS, reset, sliding switch (ap/repeater) - LEDs: 5x wifi status, 1x LAN/WAN, 1x WPS Flashing: U-Boot launches a TFTP client if WPS button is held during boot. - Server IP: 192.168.10.100 - Firmware file name: firmware.bin Device will reboot automatically. First boot takes about 90s. Coelner (waenger@gmail.com) is the original author, but I have made some fixes. He does not wish to sign off using his real name. Signed-off-by: Thomas Aldrian --- target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds | 3 +++ target/linux/ramips/mt76x8/base-files/etc/board.d/02_network | 6 ++++-- 2 files changed, 7 insertions(+), 2 deletions(-) (limited to 'target/linux/ramips/mt76x8/base-files') diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds index 98a693c2e9..0af01d4393 100644 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds @@ -136,6 +136,9 @@ wavlink,wl-wn575a3) ucidef_set_led_rssi "wifi-med" "wifi-med" "green:wifi-med" "wlan1" "50" "84" ucidef_set_led_rssi "wifi-high" "wifi-high" "green:wifi-high" "wlan1" "85" "100" ;; +wavlink,wl-wn576a2) + ucidef_set_led_switch "lan" "lan" "blue:lan" "switch0" "0x10" + ;; wavlink,wl-wn577a2|\ wavlink,wl-wn578a2) ucidef_set_led_switch "lan" "lan" "green:lan" "switch0" "0x8" diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index 12a29b3907..d4e3027f4e 100644 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -129,7 +129,8 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:wan" "6@eth0" ;; - tplink,tl-wr902ac-v3) + tplink,tl-wr902ac-v3|\ + wavlink,wl-wn576a2) ucidef_add_switch "switch0" \ "4:lan" "6@eth0" ;; @@ -229,7 +230,8 @@ ramips_setup_macs() onion,omega2|\ onion,omega2p|\ vocore,vocore2|\ - vocore,vocore2-lite) + vocore,vocore2-lite|\ + wavlink,wl-wn576a2) label_mac=$(mtd_get_mac_binary factory 0x4) ;; rakwireless,rak633|\ -- cgit v1.2.3