From e431195abfeb49318f858030c239a258ac03b990 Mon Sep 17 00:00:00 2001
From: Alessio Prescenzo <alessioprescenzo@gmail.com>
Date: Wed, 22 Sep 2021 16:45:19 +0200
Subject: ramips: add support for Cudy X6
Specifications:
SoC: MediaTek MT7621
RAM: 256 MB
Flash: 32 MB
WiFi: MediaTek MT7915E
Switch: 1 WAN, 4 LAN (Gigabit)
Ports: 1 USB 3.0
Buttons: Reset, WPS
LEDs: Power, System, Wan, Lan 1-4, WiFi 2.4G, WiFi 5G, WPS, USB
Power: DC 12V 1A tip positive
Installation:
Download and flash the manufacturer's built OpenWRT image available at
http://www.cudytech.com/openwrt_software_download
Install the new OpenWRT image via luci (System -> Backup/Flash firmware)
Be sure to NOT keep settings. The force upgrade may need to be checked
due to differences in router naming conventions.
Recovery:
Loads only signed manufacture firmware due to bootloader RSA verification
serve tftp-recovery image as /recovery.bin on 192.168.1.88/24
connect to any lan ethernet port
power on the device while holding the reset button
wait at least 8 seconds before releasing reset button for image to
download
Signed-off-by: Alessio Prescenzo <alessioprescenzo@gmail.com>
[ensure unique wireless MAC, fix GPIO pingroup]
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 4a8eaa5c7c9235212c4af022c18b2dfbadfe557f)
---
.../ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac | 4 ++++
1 file changed, 4 insertions(+)
(limited to 'target/linux/ramips/mt7621')
diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index 504dfbc9ee..fae181cfed 100644
--- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -16,6 +16,10 @@ case "$board" in
[ "$PHYNBR" = "0" ] && echo -n $hw_mac_addr_ra0 > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "1" ] && echo -n $hw_mac_addr_rax0 > /sys${DEVPATH}/macaddress
;;
+ cudy,x6)
+ hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
+ macaddr_add $hw_mac_addr "$PHYNBR" > /sys${DEVPATH}/macaddress
+ ;;
dlink,dir-853-a3)
[ "$PHYNBR" = "0" ] && \
macaddr_setbit_la "$(mtd_get_mac_binary factory 0xe000)" \
--
cgit v1.2.3