From edae3479e64e93275dce4a928ea70279282eef9d Mon Sep 17 00:00:00 2001 From: ZengFei Zhang Date: Wed, 22 Feb 2017 20:47:22 +0800 Subject: ramips: add support for HiWiFi HC5962 This patch adds supports for the HiWiFi HC5962(gee4) http://www.hiwifi.com Short specification: - MT7621AT + MT7612EN + 7603EN - 256MB DDR3 RAM - 128MB NAND flash - 1+3 x 1000M Ethernet - 1x USB 2.0 port. 1x USB 3.0 port. - reset button - UART pad on PCB (JP3: TX, RX, GND, 3.3V) Flash instruction: 1, Download lede-ramips-mt7621-hc5962-squashfs-factory.bin 2, Login as root via SSH on 192.168.199.1 and then copy factory.bin(using wget or nc or...) to /tmp/ 3, use the following commands: $ mtd write /tmp/lede-ramips-mt7621-hc5962-squashfs-factory.bin firmware $ mtd erase firmware_backup && reboot After reboot you should be able to login as root via SSH on 192.168.1.1 Signed-off-by: ZengFei Zhang --- target/linux/ramips/image/mt7621.mk | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'target/linux/ramips/image') diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 83c9d6d8f1..d40c185084 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -71,6 +71,21 @@ define Device/firewrt endef TARGET_DEVICES += firewrt +define Device/hc5962 + DTS := HC5962 + BLOCKSIZE := 128k + PAGESIZE := 2048 + KERNEL_SIZE := 2097152 + UBINIZE_OPTS := -E 5 + IMAGE_SIZE := $(ralink_default_fw_size_32M) + IMAGES += factory.bin + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata + IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | check-size $$$$(IMAGE_SIZE) + DEVICE_TITLE := HiWiFi HC5962 + DEVICE_PACKAGES := kmod-usb3 kmod-mt76 +endef +TARGET_DEVICES += hc5962 + define Device/mt7621 DTS := MT7621 BLOCKSIZE := 64k -- cgit v1.2.3