From 6410c30dc7cefdf06dca1e09d1c337138aa4abea Mon Sep 17 00:00:00 2001 From: Sungbo Eo Date: Fri, 13 Mar 2020 04:19:32 +0900 Subject: ramips: add support for TOTOLINK A3 TOTOLINK A3 is a clone of ipTIME A3. The only difference is the model name. Specifications: - SoC: MT7628AN - RAM: DDR2 64MB - Flash: SPI NOR 8MB - WiFi: - 2.4GHz: SoC internal - 5GHz: MT7612EN - Ethernet: 3x 10/100Mbps - Switch: SoC internal Installation via web interface: 1. Flash **initramfs** image through the stock web interface. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Revert to stock firmware: 1. Perform sysupgrade with stock image. Tested on device by JasonHCH Signed-off-by: Sungbo Eo --- target/linux/ramips/dts/mt7628an_totolink_a3.dts | 36 ++++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 target/linux/ramips/dts/mt7628an_totolink_a3.dts (limited to 'target/linux/ramips/dts') diff --git a/target/linux/ramips/dts/mt7628an_totolink_a3.dts b/target/linux/ramips/dts/mt7628an_totolink_a3.dts new file mode 100644 index 0000000000..87dd8559b7 --- /dev/null +++ b/target/linux/ramips/dts/mt7628an_totolink_a3.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7628an_iptime.dtsi" + +/ { + compatible = "totolink,a3", "mediatek,mt7628an-soc"; + model = "TOTOLINK A3"; + + aliases { + led-boot = &led_cpu; + led-failsafe = &led_cpu; + led-running = &led_cpu; + led-upgrade = &led_cpu; + }; + + leds { + compatible = "gpio-leds"; + + led_cpu: cpu { + label = "a3:blue:cpu"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + wlan { + label = "a3:blue:wlan"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + }; +}; + +&esw { + mediatek,portmap = <0x3e>; + mediatek,portdisable = <0x32>; +}; -- cgit v1.2.3