From 8c1f5141ceee722cdd282f909390b73455968cfd Mon Sep 17 00:00:00 2001 From: John Crispin Date: Tue, 24 Nov 2015 18:29:26 +0000 Subject: ralink: add support for netis WF-2881 netis WF-2881 is an MT7621AT based router with MT7602EN, MT7612EN. It has 128MB DDR3, 128MB SLC NAND FLASH, 5-port Gbps switch and 1x USB 3.0. The following patch adds support for this device. this device only works on top of UBI. Tested and working: * ethernet * both WiFi radios * USB 3.0 * buttons (reset button) * ethernet switch and USB diag LEDs * UART * GPIOs * sysupgrade Tested and not working * failsafe Signed-off-by: YounJae Rho SVN-Revision: 47619 --- target/linux/ramips/dts/WF-2881.dts | 133 ++++++++++++++++++++++++++++++++++++ 1 file changed, 133 insertions(+) create mode 100644 target/linux/ramips/dts/WF-2881.dts (limited to 'target/linux/ramips/dts/WF-2881.dts') diff --git a/target/linux/ramips/dts/WF-2881.dts b/target/linux/ramips/dts/WF-2881.dts new file mode 100644 index 0000000000..7228dc527f --- /dev/null +++ b/target/linux/ramips/dts/WF-2881.dts @@ -0,0 +1,133 @@ +/dts-v1/; + +/include/ "mt7621.dtsi" + +/ { + compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc"; + model = "NETIS WF-2881"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + palmbus@1E000000 { + spi@b00 { + status="disabled"; + }; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + nand@1e003000 { + compatible = "mtk,mt7621-nand"; + bank-width = <2>; + reg = <0x1e003000 0x800 + 0x1e003800 0x800>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x1000>; + read-only; + }; + + partition@80000 { + label = "config"; + reg = <0x80000 0x80000>; + read-only; + }; + + factory: partition@100000 { + label = "factory"; + reg = <0x100000 0x40000>; + read-only; + }; + + firmware { + label = "firmware"; + reg = <0x140000 0x6EC0000>; + }; + + partition@140000 { + label = "kernel"; + reg = <0x140000 0x200000>; + }; + + partition@340000 { + label = "ubi"; + reg = <0x340000 0x6CC0000>; + }; + }; + + pcie@1e140000 { + status = "okay"; + + pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x8000>; + mediatek,2ghz = <0>; + }; + }; + + pcie1 { + mt76@1,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x0000>; + mediatek,5ghz = <0>; + }; + }; + }; + + ethernet@1e100000 { + mtd-mac-address = <&factory 0xe006>; + }; + + gpio-leds { + compatible = "gpio-leds"; + + usb { + label = "wf-2881:green:usb"; + gpios = <&gpio0 6 1>; + }; + + wps { + label = "wf-2881:green:wps"; + gpios = <&gpio0 0 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 12 1>; + linux,code = <0x198>; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "uart3", "jtag"; + ralink,function = "gpio"; + }; + }; + }; +}; -- cgit v1.2.3