From 73e0f52b6e4e1c79e4e95573f2050ae9ff10ac00 Mon Sep 17 00:00:00 2001 From: Nicholas Smith Date: Fri, 19 Apr 2019 14:12:11 +1000 Subject: ramips: add support for Telco Electronics X1 Hardware: SoC: MT7621 DRAM: 256MB DDR3 Flash: 16MB SPI-NOR WiFi: 2.4GHz: MT7603 @ PCIe0 WiFi: 5.8GHz: MT7612 @ PCIe1 Modem: Sierra Wireless MC74xx Interfaces: GBE RJ45 x5 mPCIe x2 UART x1 I2C x1 JTAG x1 UIM x1 LEDs x6 Flash instructions: Flash from within the factory bootloader, firmware web interface or CLI using sysupgrade -F -n Signed-off-by: Nicholas Smith --- target/linux/ramips/base-files/etc/board.d/02_network | 1 + target/linux/ramips/base-files/etc/board.d/03_gpio_switches | 3 +++ 2 files changed, 4 insertions(+) (limited to 'target/linux/ramips/base-files') diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 9c9517a7f3..dcc7b4a747 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -119,6 +119,7 @@ ramips_setup_interfaces() rt-n12p|\ sap-g3200u3|\ sk-wb8|\ + telco-electronics,x1|\ unielec,u7621-06-256m-16m|\ unielec,u7621-06-512m-64m|\ vr500|\ diff --git a/target/linux/ramips/base-files/etc/board.d/03_gpio_switches b/target/linux/ramips/base-files/etc/board.d/03_gpio_switches index 8abe107a7c..1406f91f8f 100755 --- a/target/linux/ramips/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ramips/base-files/etc/board.d/03_gpio_switches @@ -22,6 +22,9 @@ head-weblink,hdrm200) mikrotik,rb750gr3) ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "17" ;; +telco-electronics,x1) + ucidef_add_gpio_switch "modem_reset" "Modem Reset" "16" + ;; ubnt-erx) ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "0" ;; -- cgit v1.2.3