From 20b09a2125f5b35ade1f3e9cebb15fe03e3b4e3c Mon Sep 17 00:00:00 2001 From: Pawel Dembicki Date: Sat, 17 Nov 2018 08:47:40 +0000 Subject: ramips: add support for Lava LR-25G001 The Lava LR-25G001 Wireless Router is based on the MT7620A SoC. Specification: - MediaTek MT7620A (580 Mhz) - 64 MB of RAM - 16 MB of FLASH - 1x 802.11bgn radio - 1x 802.11ac radio (MT7610EN) - 5x 10/100/1000 Mbps AR8337 Switch (1 WAN AND 4 LAN) - 2x external, detachable antennas - 1x USB 2.0 - UART (J3) header on PCB (57600 8n1) - 8x LED (3x GPIO-controlled), 2x button - JBOOT bootloader Known issues: - Work only three Gigabit ports (3/5, 1 WAN and 2LAN) Installation: Apply factory image via http web-gui or JBOOT recovery page How to revert to OEM firmware: - push the reset button and turn on the power. Wait until LED start blinking (~10sec.) - upload original factory image via JBOOT http (IP: 192.168.123.254) Signed-off-by: Pawel Dembicki --- target/linux/ramips/base-files/lib/upgrade/platform.sh | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'target/linux/ramips/base-files/lib') diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index f54f2fbe77..ecc4650f68 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -295,7 +295,8 @@ platform_check_image() { dlink,dwr-116-a1|\ dlink,dwr-118-a2|\ dlink,dwr-921-c1|\ - dwr-512-b) + dwr-512-b|\ + lava,lr-25g001) [ "$magic" != "0404242b" ] && { echo "Invalid image type." return 1 -- cgit v1.2.3