From 85caf21ade2907cfd40c28783192ff31c16a74dc Mon Sep 17 00:00:00 2001 From: Tomasz Maciej Nowak Date: Fri, 18 Dec 2020 15:46:21 +0100 Subject: mvebu: macchiatobin-singleshot: enable heartbeat LED With board revision 1.3, SolidRun moved the power LED to the middle of the board. In old place of power LED a GPIO controllable heartbeat LED was added. This commit touches only Single Shot variant, because all have revision 1.3. Some boards could be placed in an enclosure, therefore the LED18 is enabled by default, since that'll be the only visible indicator that the board is operating. Ref: http://wiki.macchiatobin.net/tiki-index.php?page=Schematics#Revision1.3_Electrical_Design_Changes Ref: http://macchiatobin.net/wp-content/uploads/2017/11/MACCHIATOBin-rev-1_3.pdf Reported-by: Alexandra Alth Signed-off-by: Tomasz Maciej Nowak --- target/linux/mvebu/image/cortexa72.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'target/linux/mvebu/image') diff --git a/target/linux/mvebu/image/cortexa72.mk b/target/linux/mvebu/image/cortexa72.mk index 1440c07a0b..8bd4581766 100644 --- a/target/linux/mvebu/image/cortexa72.mk +++ b/target/linux/mvebu/image/cortexa72.mk @@ -38,7 +38,7 @@ define Device/marvell_macchiatobin-singleshot DEVICE_ALT0_VENDOR := SolidRun DEVICE_ALT0_MODEL := Armada 8040 Community Board DEVICE_ALT0_VARIANT := Single Shot - DEVICE_PACKAGES += kmod-i2c-mux-pca954x + DEVICE_PACKAGES += kmod-i2c-mux-pca954x kmod-ledtrig-heartbeat DEVICE_DTS := armada-8040-mcbin-singleshot SUPPORTED_DEVICES := marvell,armada8040-mcbin-singleshot endef -- cgit v1.2.3