From f2b7d9dc1ca3d33f14961cf2885639f4f9e8965e Mon Sep 17 00:00:00 2001 From: Chris Blake Date: Sat, 30 Sep 2017 11:14:58 -0500 Subject: mpc85xx: Add Aerohive HiveAP-330 Access Point The following adds the Aerohive HiveAP-330 Access Point to LEDE under the mpc85xx/p1020 subtarget. Hardware: - SoC: Freescale P1020NSE2DFB - NAND: Intel JS28F512M29EWH 64MB - Memory: 2x ProMOS V59C1G01168QBJ3 128MB (Total of 256MB) - 2.4GHz WiFi: Atheros AR9390-AL1A - 5.0GHz WiFi: Atheros AR9390-AL1A - Eth1: Atheros AR8035-A PoE - Eth2: Atheros AR8035-A - TPM: Atmel AT97SC3204 - LED Driver: TI LP5521 Flashing: 1. Hook into UART (9600 baud) and enter U-Boot. You may need to enter a password of administrator or AhNf?d@ta06 if prompted. 2. Once in U-Boot, tftp boot the initramfs image: dhcp; tftpboot 0x1000000 192.168.1.101:lede- mpc85xx-p1020-hiveap-330-initramfs.zImage; tftpboot 0x6000000 192.168.1.101:lede-mpc85xx-p1020-hiveap-330.fdt; bootm 0x1000000 - 0x6000000; 3. Once booted, scp over the sysupgrade file and sysupgrade the device to flash LEDE to the NAND. sysupgrade /tmp/lede-mpc85xx-p1020-hiveap-330-sysupgrade.img Signed-off-by: Chris Blake --- .../mpc85xx/base-files/lib/upgrade/platform.sh | 27 ++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'target/linux/mpc85xx/base-files/lib/upgrade') diff --git a/target/linux/mpc85xx/base-files/lib/upgrade/platform.sh b/target/linux/mpc85xx/base-files/lib/upgrade/platform.sh index 65b3674769..9e3a3d661a 100755 --- a/target/linux/mpc85xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/mpc85xx/base-files/lib/upgrade/platform.sh @@ -4,6 +4,10 @@ PART_NAME=firmware +get_magic_long_at() { + (get_image "$1" | dd bs=4 count=1 skip="$2" | hexdump -v -n 4 -e '1/1 "%02x"') 2>/dev/null +} + tplink_get_hwid() { local part @@ -28,6 +32,29 @@ platform_check_image() { [ "$#" -gt 1 ] && return 1 case $board in + hiveap-330) + local init_magic=$(get_magic_long_at "$1" "65536") + local root_magic=$(get_magic_long_at "$1" "131072") + local kernel_magic=$(get_magic_long_at "$1" "10551296") + + [ "$magic" != "d00dfeed" ] && { + echo "Invalid dtb image type." + return 1 + } + [ "$init_magic" != "27051956" ] && { + echo "Invalid initramfs image type." + return 1 + } + [ "$root_magic" != "68737173" ] && { + echo "Invalid rootfs image type." + return 1 + } + [ "$kernel_magic" != "27051956" ] && { + echo "Invalid kernel image type." + return 1 + } + return 0 + ;; tl-wdr4900-v1) [ "$magic" != "01000000" ] && { echo "Invalid image type." -- cgit v1.2.3