From cddd4591404fb4c53dc0b3c0b15b942cdbed4356 Mon Sep 17 00:00:00 2001 From: Yangbo Lu Date: Fri, 10 Apr 2020 10:47:05 +0800 Subject: layerscape: add patches-5.4 Add patches for linux-5.4. The patches are from NXP LSDK-20.04 release which was tagged LSDK-20.04-V5.4. https://source.codeaurora.org/external/qoriq/qoriq-components/linux/ For boards LS1021A-IOT, and Traverse-LS1043 which are not involved in LSDK, port the dts patches from 4.14. The patches are sorted into the following categories: 301-arch-xxxx 302-dts-xxxx 303-core-xxxx 701-net-xxxx 801-audio-xxxx 802-can-xxxx 803-clock-xxxx 804-crypto-xxxx 805-display-xxxx 806-dma-xxxx 807-gpio-xxxx 808-i2c-xxxx 809-jailhouse-xxxx 810-keys-xxxx 811-kvm-xxxx 812-pcie-xxxx 813-pm-xxxx 814-qe-xxxx 815-sata-xxxx 816-sdhc-xxxx 817-spi-xxxx 818-thermal-xxxx 819-uart-xxxx 820-usb-xxxx 821-vfio-xxxx Signed-off-by: Yangbo Lu --- ...m-gpu-bridge-cdns-Add-force-mode-set-flag.patch | 107 +++++++++++++++++++++ 1 file changed, 107 insertions(+) create mode 100644 target/linux/layerscape/patches-5.4/805-display-0055-LF-568-2-drm-gpu-bridge-cdns-Add-force-mode-set-flag.patch (limited to 'target/linux/layerscape/patches-5.4/805-display-0055-LF-568-2-drm-gpu-bridge-cdns-Add-force-mode-set-flag.patch') diff --git a/target/linux/layerscape/patches-5.4/805-display-0055-LF-568-2-drm-gpu-bridge-cdns-Add-force-mode-set-flag.patch b/target/linux/layerscape/patches-5.4/805-display-0055-LF-568-2-drm-gpu-bridge-cdns-Add-force-mode-set-flag.patch new file mode 100644 index 0000000000..11134536ae --- /dev/null +++ b/target/linux/layerscape/patches-5.4/805-display-0055-LF-568-2-drm-gpu-bridge-cdns-Add-force-mode-set-flag.patch @@ -0,0 +1,107 @@ +From d13b544c949e85e39f6c1c20485d8f37f5127e59 Mon Sep 17 00:00:00 2001 +From: Sandor Yu +Date: Fri, 20 Dec 2019 17:31:52 +0800 +Subject: [PATCH] LF-568-2: drm: gpu: bridge: cdns: Add force mode set flag + +In DRM framework, when hdmi/dp cable plugout/plugin in the same HDMI +sink, because the video mode is same, DRM will not call mode_set. +But for HDMI 2.0 sink the SCDC configurate will lost, and DP sink +linktraning status will lost too after cable plugout then plugin. + +Currently, hdmi/dp driver will call mode_set function in HPD thread, +But the mode_set function is called out of DRM framework, and it have +chance to fail. +In the patch add force_mode_set flag, set the crtc_state->mode_changed +to force drm call mode_set when cable plugin. + +Signed-off-by: Sandor Yu +--- + drivers/gpu/drm/bridge/cadence/cdns-dp-core.c | 5 +++++ + drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c | 12 ++++++++---- + drivers/gpu/drm/imx/cdn-mhdp-imxdrv.c | 4 ++++ + include/drm/bridge/cdns-mhdp-common.h | 1 + + 4 files changed, 18 insertions(+), 4 deletions(-) + +--- a/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c ++++ b/drivers/gpu/drm/bridge/cadence/cdns-dp-core.c +@@ -322,6 +322,9 @@ static void cdns_dp_bridge_mode_set(stru + mutex_lock(&mhdp->lock); + cdns_dp_mode_set(mhdp); + mutex_unlock(&mhdp->lock); ++ ++ /* reset force mode set flag */ ++ mhdp->force_mode_set = false; + } + + static void cdn_dp_bridge_enable(struct drm_bridge *bridge) +@@ -375,6 +378,8 @@ static void hotplug_work_func(struct wor + } else if (connector->status == connector_status_disconnected) { + /* Cable Disconnedted */ + DRM_INFO("HDMI/DP Cable Plug Out\n"); ++ /* force mode set for cable replugin to recovery DP video modes */ ++ mhdp->force_mode_set = true; + enable_irq(mhdp->irq[IRQ_IN]); + } + } +--- a/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c ++++ b/drivers/gpu/drm/bridge/cadence/cdns-hdmi-core.c +@@ -178,6 +178,10 @@ void cdns_hdmi_mode_set(struct cdns_mhdp + struct drm_display_mode *mode = &mhdp->mode; + int ret; + ++ /* video mode valid check */ ++ if (mode->clock == 0 || mode->hdisplay == 0 || mode->vdisplay == 0) ++ return; ++ + hdmi_lanes_config(mhdp); + + cdns_mhdp_plat_call(mhdp, pclk_rate); +@@ -393,6 +397,8 @@ static void cdns_hdmi_bridge_mode_set(st + mutex_lock(&mhdp->lock); + cdns_hdmi_mode_set(mhdp); + mutex_unlock(&mhdp->lock); ++ /* reset force mode set flag */ ++ mhdp->force_mode_set = false; + } + + bool cdns_hdmi_bridge_mode_fixup(struct drm_bridge *bridge, +@@ -467,14 +473,12 @@ static void hotplug_work_func(struct wor + + if (connector->status == connector_status_connected) { + DRM_INFO("HDMI Cable Plug In\n"); +- /* reset video mode after cable plugin */ +- mutex_lock(&mhdp->lock); +- cdns_hdmi_mode_set(mhdp); +- mutex_unlock(&mhdp->lock); + enable_irq(mhdp->irq[IRQ_OUT]); + } else if (connector->status == connector_status_disconnected) { + /* Cable Disconnedted */ + DRM_INFO("HDMI Cable Plug Out\n"); ++ /* force mode set for cable replugin to recovery HDMI2.0 video modes */ ++ mhdp->force_mode_set = true; + enable_irq(mhdp->irq[IRQ_IN]); + } + } +--- a/drivers/gpu/drm/imx/cdn-mhdp-imxdrv.c ++++ b/drivers/gpu/drm/imx/cdn-mhdp-imxdrv.c +@@ -40,6 +40,10 @@ static int cdns_mhdp_imx_encoder_atomic_ + + if (mhdp->plat_data->video_format != 0) + imx_crtc_state->bus_format = mhdp->plat_data->video_format; ++ ++ if (mhdp->force_mode_set) ++ crtc_state->mode_changed = true; ++ + return 0; + } + +--- a/include/drm/bridge/cdns-mhdp-common.h ++++ b/include/drm/bridge/cdns-mhdp-common.h +@@ -684,6 +684,7 @@ struct cdns_mhdp_device { + bool link_up; + bool power_up; + bool plugged; ++ bool force_mode_set; + bool is_hpd; + bool is_ls1028a; + struct mutex lock; -- cgit v1.2.3