From 1a28100e68f4863ebc68625d5c6123ef0e5de8db Mon Sep 17 00:00:00 2001 From: Yangbo Lu Date: Tue, 6 Feb 2018 12:39:05 +0800 Subject: layerscape: update patches-4.9 to LSDK1712 Patches changes - Updated patches-4.9 to NXP LSDK1712 linux-4.9. - Merged changes of patch 303 into integrated patch 201. - Split changes of patch 706 into dpaa part and dpaa2 part, and merged these changes into integrated patches 701 and 705. - Removed patch 819 since ehci-fsl driver could be compiled now. - Refreshed these patches. Signed-off-by: Yangbo Lu --- .../patches-4.9/809-i2c-support-layerscape.patch | 249 ++++++++++++++++++++- 1 file changed, 238 insertions(+), 11 deletions(-) (limited to 'target/linux/layerscape/patches-4.9/809-i2c-support-layerscape.patch') diff --git a/target/linux/layerscape/patches-4.9/809-i2c-support-layerscape.patch b/target/linux/layerscape/patches-4.9/809-i2c-support-layerscape.patch index edb61b5c71..0b5f5837fb 100644 --- a/target/linux/layerscape/patches-4.9/809-i2c-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.9/809-i2c-support-layerscape.patch @@ -1,21 +1,180 @@ -From 3c5032fe34f1af50e9e5fe58d40bf93c1717302f Mon Sep 17 00:00:00 2001 +From 659aa30c59fb188b533a7edcb9bd38ac007a2739 Mon Sep 17 00:00:00 2001 From: Yangbo Lu -Date: Mon, 25 Sep 2017 12:19:53 +0800 -Subject: [PATCH] i2c: support layerscape +Date: Wed, 17 Jan 2018 15:35:11 +0800 +Subject: [PATCH 21/30] i2c: support layerscape -This is a integrated patch for layerscape i2c support. +This is an integrated patch for layerscape i2c support. Signed-off-by: Zhang Ying-22455 Signed-off-by: Priyanka Jain Signed-off-by: Yangbo Lu --- - drivers/i2c/busses/i2c-imx.c | 10 ++++++++- - drivers/i2c/muxes/i2c-mux-pca954x.c | 43 +++++++++++++++++++++++++++++++++++++ - 2 files changed, 52 insertions(+), 1 deletion(-) + drivers/i2c/busses/i2c-imx.c | 195 +++++++++++++++++++++++++++++++++++- + drivers/i2c/muxes/i2c-mux-pca954x.c | 43 ++++++++ + 2 files changed, 237 insertions(+), 1 deletion(-) --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c -@@ -889,6 +889,14 @@ static int i2c_imx_xfer(struct i2c_adapt +@@ -53,6 +53,11 @@ + #include + #include + #include ++#include ++#include ++#include ++#include ++#include + + /* This will be the driver name the kernel reports */ + #define DRIVER_NAME "imx-i2c" +@@ -117,6 +122,54 @@ + + #define I2C_PM_TIMEOUT 10 /* ms */ + ++enum pinmux_endian_type { ++ BIG_ENDIAN, ++ LITTLE_ENDIAN, ++}; ++ ++struct pinmux_cfg { ++ enum pinmux_endian_type endian; /* endian of RCWPMUXCR0 */ ++ u32 pmuxcr_offset; ++ u32 pmuxcr_set_bit; /* pin mux of RCWPMUXCR0 */ ++}; ++ ++static struct pinmux_cfg ls1012a_pinmux_cfg = { ++ .endian = BIG_ENDIAN, ++ .pmuxcr_offset = 0x430, ++ .pmuxcr_set_bit = 0x10, ++}; ++ ++static struct pinmux_cfg ls1043a_pinmux_cfg = { ++ .endian = BIG_ENDIAN, ++ .pmuxcr_offset = 0x40C, ++ .pmuxcr_set_bit = 0x10, ++}; ++ ++static struct pinmux_cfg ls1046a_pinmux_cfg = { ++ .endian = BIG_ENDIAN, ++ .pmuxcr_offset = 0x40C, ++ .pmuxcr_set_bit = 0x80000000, ++}; ++ ++static const struct of_device_id pinmux_of_match[] = { ++ { .compatible = "fsl,ls1012a-vf610-i2c", .data = &ls1012a_pinmux_cfg}, ++ { .compatible = "fsl,ls1043a-vf610-i2c", .data = &ls1043a_pinmux_cfg}, ++ { .compatible = "fsl,ls1046a-vf610-i2c", .data = &ls1046a_pinmux_cfg}, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, pinmux_of_match); ++ ++/* The SCFG, Supplemental Configuration Unit, provides SoC specific ++ * configuration and status registers for the device. There is a ++ * SDHC IO VSEL control register on SCFG for some platforms. It's ++ * used to support SDHC IO voltage switching. ++ */ ++static const struct of_device_id scfg_device_ids[] = { ++ { .compatible = "fsl,ls1012a-scfg", }, ++ { .compatible = "fsl,ls1043a-scfg", }, ++ { .compatible = "fsl,ls1046a-scfg", }, ++ {} ++}; + /* + * sorted list of clock divider, register value pairs + * taken from table 26-5, p.26-9, Freescale i.MX +@@ -210,6 +263,12 @@ struct imx_i2c_struct { + struct pinctrl_state *pinctrl_pins_gpio; + + struct imx_i2c_dma *dma; ++ int layerscape_bus_recover; ++ int gpio; ++ int need_set_pmuxcr; ++ int pmuxcr_set; ++ int pmuxcr_endian; ++ void __iomem *pmuxcr_addr; + }; + + static const struct imx_i2c_hwdata imx1_i2c_hwdata = { +@@ -879,6 +938,78 @@ static int i2c_imx_read(struct imx_i2c_s + return 0; + } + ++/* ++ * Based on the I2C specification, if the data line (SDA) is ++ * stuck low, the master should send nine * clock pulses. ++ * The I2C slave device that held the bus low should release it ++ * sometime within * those nine clocks. Due to this erratum, ++ * the I2C controller cannot generate nine clock pulses. ++ */ ++static int i2c_imx_recovery_for_layerscape(struct imx_i2c_struct *i2c_imx) ++{ ++ u32 pmuxcr = 0; ++ int ret; ++ unsigned int i, temp; ++ ++ /* configure IICx_SCL/GPIO pin as a GPIO */ ++ if (i2c_imx->need_set_pmuxcr == 1) { ++ pmuxcr = ioread32be(i2c_imx->pmuxcr_addr); ++ if (i2c_imx->pmuxcr_endian == BIG_ENDIAN) ++ iowrite32be(i2c_imx->pmuxcr_set|pmuxcr, ++ i2c_imx->pmuxcr_addr); ++ else ++ iowrite32(i2c_imx->pmuxcr_set|pmuxcr, ++ i2c_imx->pmuxcr_addr); ++ } ++ ++ ret = gpio_request(i2c_imx->gpio, i2c_imx->adapter.name); ++ if (ret) { ++ dev_err(&i2c_imx->adapter.dev, ++ "can't get gpio: %d\n", ret); ++ return ret; ++ } ++ ++ /* Configure GPIO pin as an output and open drain. */ ++ gpio_direction_output(i2c_imx->gpio, 1); ++ udelay(10); ++ ++ /* Write data to generate 9 pulses */ ++ for (i = 0; i < 9; i++) { ++ gpio_set_value(i2c_imx->gpio, 1); ++ udelay(10); ++ gpio_set_value(i2c_imx->gpio, 0); ++ udelay(10); ++ } ++ /* ensure that the last level sent is always high */ ++ gpio_set_value(i2c_imx->gpio, 1); ++ ++ /* ++ * Set I2Cx_IBCR = 0h00 to generate a STOP and then ++ * set I2Cx_IBCR = 0h80 to reset ++ */ ++ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); ++ temp &= ~(I2CR_MSTA | I2CR_MTX); ++ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); ++ ++ /* Restore the saved value of the register SCFG_RCWPMUXCR0 */ ++ if (i2c_imx->need_set_pmuxcr == 1) { ++ if (i2c_imx->pmuxcr_endian == BIG_ENDIAN) ++ iowrite32be(pmuxcr, i2c_imx->pmuxcr_addr); ++ else ++ iowrite32(pmuxcr, i2c_imx->pmuxcr_addr); ++ } ++ /* ++ * Set I2C_IBSR[IBAL] to clear the IBAL bit if- ++ * I2C_IBSR[IBAL] = 1 ++ */ ++ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR); ++ if (temp & I2SR_IAL) { ++ temp &= ~I2SR_IAL; ++ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR); ++ } ++ return 0; ++} ++ + static int i2c_imx_xfer(struct i2c_adapter *adapter, + struct i2c_msg *msgs, int num) + { +@@ -889,6 +1020,19 @@ static int i2c_imx_xfer(struct i2c_adapt dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); @@ -24,13 +183,81 @@ Signed-off-by: Yangbo Lu + * before switching to master mode and attempting a Start cycle + */ + result = i2c_imx_bus_busy(i2c_imx, 0); -+ if (result) -+ goto out; ++ if (result) { ++ /* timeout */ ++ if ((result == -ETIMEDOUT) && (i2c_imx->layerscape_bus_recover == 1)) ++ i2c_imx_recovery_for_layerscape(i2c_imx); ++ else ++ goto out; ++ } + result = pm_runtime_get_sync(i2c_imx->adapter.dev.parent); if (result < 0) goto out; -@@ -1100,7 +1108,7 @@ static int i2c_imx_probe(struct platform +@@ -1031,6 +1175,50 @@ static int i2c_imx_init_recovery_info(st + return 0; + } + ++/* ++ * switch SCL and SDA to their GPIO function and do some bitbanging ++ * for bus recovery. ++ * There are platforms such as Layerscape that don't support pinctrl, so add ++ * workaround for layerscape, it has no effect for other platforms. ++ */ ++static int i2c_imx_init_recovery_for_layerscape( ++ struct imx_i2c_struct *i2c_imx, ++ struct platform_device *pdev) ++{ ++ const struct of_device_id *of_id; ++ struct device_node *np = pdev->dev.of_node; ++ struct pinmux_cfg *pinmux_cfg; ++ struct device_node *scfg_node; ++ void __iomem *scfg_base = NULL; ++ ++ i2c_imx->gpio = of_get_named_gpio(np, "fsl-scl-gpio", 0); ++ if (!gpio_is_valid(i2c_imx->gpio)) { ++ dev_info(&pdev->dev, "fsl-scl-gpio not found\n"); ++ return 0; ++ } ++ pinmux_cfg = devm_kzalloc(&pdev->dev, sizeof(*pinmux_cfg), GFP_KERNEL); ++ if (!pinmux_cfg) ++ return -ENOMEM; ++ ++ i2c_imx->need_set_pmuxcr = 0; ++ of_id = of_match_node(pinmux_of_match, np); ++ if (of_id) { ++ pinmux_cfg = (struct pinmux_cfg *)of_id->data; ++ i2c_imx->pmuxcr_endian = pinmux_cfg->endian; ++ i2c_imx->pmuxcr_set = pinmux_cfg->pmuxcr_set_bit; ++ scfg_node = of_find_matching_node(NULL, scfg_device_ids); ++ if (scfg_node) { ++ scfg_base = of_iomap(scfg_node, 0); ++ if (scfg_base) { ++ i2c_imx->pmuxcr_addr = scfg_base + pinmux_cfg->pmuxcr_offset; ++ i2c_imx->need_set_pmuxcr = 1; ++ } ++ } ++ } ++ i2c_imx->layerscape_bus_recover = 1; ++ return 0; ++} ++ + static u32 i2c_imx_func(struct i2c_adapter *adapter) + { + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL +@@ -1086,6 +1274,11 @@ static int i2c_imx_probe(struct platform + i2c_imx->adapter.dev.of_node = pdev->dev.of_node; + i2c_imx->base = base; + ++ /* Init optional bus recovery for layerscape */ ++ ret = i2c_imx_init_recovery_for_layerscape(i2c_imx, pdev); ++ if (ret) ++ return ret; ++ + /* Get I2C clock */ + i2c_imx->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(i2c_imx->clk)) { +@@ -1100,7 +1293,7 @@ static int i2c_imx_probe(struct platform } /* Request IRQ */ -- cgit v1.2.3