From 712ebe95f81de11796d1ba02dfc1a402dbd203a2 Mon Sep 17 00:00:00 2001 From: Tino Reichardt Date: Sun, 26 Feb 2017 21:29:37 +0100 Subject: lantiq: add Allnet ALL0333CJ support This patch adds support for the Allnet ADSL2+ Modem ALL0333CJ. Specifications: - SoC: Amazon-SE - RAM: 16MB - Storage: 4MB NOR FLash - LEDs: Power, Ethernet, DSL (Sync) - Buttons: 1x Reset Button (not currently supported, will be done) - 1x Ethernet-Port: 1x RJ45 10/100BaseTX - 1x WAN-Port: AnnexB & J, G.992.1(ADSL), G.992.3(ADSL2), G.992.5(ADSL2+) Installation: - can be done via telnet+tftp or serial console - default passwords: - via telnet (root:admin) - via webinterface http://172.16.1.254:8235/ (admin:coolwhite) Installation via telnet / tftp: host: # your own host must have an tftpd daemon, then do this: host: ifconfig eth0:172 172.16.1.1 up host: # telnet to allnet modem, root:admin host: telnet 172.16.1.254 modem: # kill this daemon, it spams your console modem: killall dsl_cpe_control modem: # change to some place in ram: modem: cd /ramdisk/tftp_upload modem: # load lede-lantiq-ase-ALL0333CJ-squashfs-sysupgrade.bin alias uImage modem: tftp -g -r uImage 172.16.1.1 modem: # load these extra tools from your tftpd via: modem: # source: https://github.com/mcmilk/uboot-utils/releases/download/0.1/mips32.tar.gz modem: tftp -g -r flashwrite 172.16.1.1 modem: tftp -g -r fw_setenv 172.16.1.1 modem: tftp -g -r fw.conf 172.16.1.1 modem: ln -s fw_setenv fw_printenv modem: chmod +x * modem: ./fw_setenv disable_recovery y modem: ./fw_setenv kernel_addr 0xb0010000 modem: ./flashwrite /dev/mtd/1 uImage 0 Installation via serial line at uboot: uboot: # erase everything exept bootloader uboot: protect on b0000000 +10000; protect on b03f0000 +10000 uboot: erase all uboot: # get new firmware via tftp: uboot: tftpboot 0x80100000 uImage; setenv kernel_addr 0xb0010000 uboot: # copy to flash: uboot: cp.b 0x80100000 $(kernel_addr) $(filesize) uboot: # disable proprietary image checking: uboot: setenv disable_recovery=y; saveenv uboot: # reboot with LEDE ;) uboot: reset Ethernet works as expected, DSL syncronization does not work properly currently, I am working on this issue. Signed-off-by: Tino Reichardt --- target/linux/lantiq/image/Makefile | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'target/linux/lantiq/image') diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile index 572c9b3ca7..1b194b3e7b 100644 --- a/target/linux/lantiq/image/Makefile +++ b/target/linux/lantiq/image/Makefile @@ -108,6 +108,16 @@ endef ifeq ($(SUBTARGET),ase) +define Device/ALL0333CJ + IMAGE_SIZE := 3700k + DEVICE_DTS := ALL0333CJ + DEVICE_TITLE := Allnet ALL0333CJ + DEVICE_PACKAGES := kmod-ltq-adsl-ase kmod-ltq-adsl-ase-mei \ + kmod-ltq-adsl-ase-fw-b kmod-ltq-atm-ase \ + ltq-adsl-app ppp-mod-pppoe +endef +TARGET_DEVICES += ALL0333CJ + define Device/DGN1000B IMAGE_SIZE := 6000k DEVICE_DTS := DGN1000B -- cgit v1.2.3