From a20616863d32d91163043b6657a63c836bd9c5ba Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 26 Nov 2016 01:01:15 +0100 Subject: lantiq: use ath9k device tree bindings binding/owl-loader This moves the extraction of the eeprom/calibration data to a hotplug firmware script. Additionally it modifies all .dts to configure ath9k directly from within the .dts. The owl-loader approach enables support on devices with exotic eeprom data locations (such as unaligned positions on the flash or data inside an UBI volume). Signed-off-by: Martin Blumenstingl [add ath9k caldata mac address patcher] [fixes DGN3500 wifi mac] [fixes BTHOMEHUBV3A wifi mac] [set invalid mac for BTHOMEHUB2B, FRITZ3370, FRITZ7320 & FRITZ7360SL to restore previous random mac behavior] Signed-off-by: Mathias Kresin --- target/linux/lantiq/dts/DGN3500.dtsi | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-) (limited to 'target/linux/lantiq/dts/DGN3500.dtsi') diff --git a/target/linux/lantiq/dts/DGN3500.dtsi b/target/linux/lantiq/dts/DGN3500.dtsi index 1d0d71cdae..5528d5994b 100644 --- a/target/linux/lantiq/dts/DGN3500.dtsi +++ b/target/linux/lantiq/dts/DGN3500.dtsi @@ -69,19 +69,6 @@ ifxhcd@E101000 { status = "okay"; }; - - pci@E105400 { - status = "okay"; - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - }; - }; - - ath9k_eep { - compatible = "ath9k,eeprom"; - ath,eep-flash = <&ath9k_cal 0xf000>; - ath,pci-slot = <14>; - ath,eep-endian; - ath,eep-swap; }; rtl8366rb { @@ -153,6 +140,17 @@ }; }; +&pci0 { + status = "okay"; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + + wifi@168c,0029 { + compatible = "pci168c,0029"; + reg = <0x7000 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ + }; +}; + &spi { pinctrl-names = "default"; pinctrl-0 = <&pins_spi_default>; -- cgit v1.2.3