From 27b2f0fc0fc5513304a5be3c5b8cb23aeb09e6f5 Mon Sep 17 00:00:00 2001 From: Ademar Arvati Filho Date: Fri, 6 Jul 2018 00:56:58 +0000 Subject: kirkwood: add support for Iomega Storcenter ix2-200 Iomega Storcenter ix2-200 is a dual SATA NAS powered by a Marvell Kirkwood SoC clocked at 1GHz. It has 256MB of RAM and 32MB of flash memory, 3x USB 2.0 and 1x 1Gbit/s NIC Specification: - SoC: Marvell Kirkwood 88F6281 - CPU/Speed: 1000Mhz - Flash-Chip: Hynix NAND - Flash size: 32 MiB,erase size:16 KiB,page size:512,OOB size:16 - RAM: 256MB - LAN: 1x 1000 Mbps Ethernet - WiFi: none - 3x USB 2.0 - UART: for serial console Installation instructions - easy steps: 1. download factory.bin and copy into tftp server 2. access uboot environment with serial cable and run ``` setenv mainlineLinux yes setenv arcNumber 1682 setenv console 'console=ttyS0,115200n8' setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)' setenv bootargs_root 'root=' setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000' saveenv setenv serverip 192.168.1.1 setenv ipaddr 192.168.1.13 tftpboot 0x00800000 factory.bin nand erase 0x100000 $(filesize) nand write 0x00800000 0x100000 $(filesize) run bootcmd ``` 3. access openwrt by dhcp ip address assigned by your router (p.ex: 192.168.1.13) Installation steps nand bad blocks proof: 1. download initramfs-uImage and copy into usb ext2 partition ``` mkfs.ext2 -L ext2 /dev/sdh1 mount -t ext2 /dev/sdh1 /mnt cp initramfs-uImage /mnt/initramfs.bin umount /mnt ``` 2. access uboot environment with serial cable and run ``` setenv mainlineLinux yes setenv arcNumber 1682 setenv console 'console=ttyS0,115200n8' setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)' setenv bootargs_root 'root=' setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000' saveenv usb reset; ext2load usb 0:1 0x00800000 /initramfs.bin; bootm 0x00800000 ``` 3. log into openwrt and sysupgrade to install into flash ``` sysupgrade -n /tmp/sysupgrade.bin ``` 4. access openwrt by dhcp ip address assigned by your router (p.ex: 192.168.1.13) Signed-off-by: Ademar Arvati Filho --- .../base-files/etc/init.d/hwmon_fancontrol | 23 ++++++++++++++++++++++ .../base-files/etc/init.d/nsa310_fancontrol | 20 ------------------- 2 files changed, 23 insertions(+), 20 deletions(-) create mode 100755 target/linux/kirkwood/base-files/etc/init.d/hwmon_fancontrol delete mode 100755 target/linux/kirkwood/base-files/etc/init.d/nsa310_fancontrol (limited to 'target/linux/kirkwood/base-files/etc/init.d') diff --git a/target/linux/kirkwood/base-files/etc/init.d/hwmon_fancontrol b/target/linux/kirkwood/base-files/etc/init.d/hwmon_fancontrol new file mode 100755 index 0000000000..0adc5d0726 --- /dev/null +++ b/target/linux/kirkwood/base-files/etc/init.d/hwmon_fancontrol @@ -0,0 +1,23 @@ +#!/bin/sh /etc/rc.common + +START=98 +boot() { +. /lib/functions.sh + +#configuring (lm85/lm63) onboard temp/fan controller to run the fan on its own +#for more information, please read https://www.kernel.org/doc/Documentation/hwmon/sysfs-interface + +case $(board_name) in +zyxel,nsa310b) + path_to_hwmon='/sys/devices/platform/ocp@f1000000/f1011000.i2c/i2c-0/0-002e/hwmon/hwmon0' + echo 2 > "$path_to_hwmon/pwm1_enable" # fan is on pwm1 + echo 1 > "$path_to_hwmon/pwm1_auto_channels" # temp1 is the only one that changes + echo 23000 > "$path_to_hwmon/temp1_auto_temp_min" + echo 43000 > "$path_to_hwmon/temp1_auto_temp_max" # next step is 49600 millicelsius, or 50 celsius, 43 celsius is better + ;; +iom,ix2-200) + path_to_hwmon='/sys/class/hwmon/hwmon0' + echo 2 > "$path_to_hwmon/pwm1_enable" # fan is on pwm1 + ;; +esac +} diff --git a/target/linux/kirkwood/base-files/etc/init.d/nsa310_fancontrol b/target/linux/kirkwood/base-files/etc/init.d/nsa310_fancontrol deleted file mode 100755 index 10eb5aa73c..0000000000 --- a/target/linux/kirkwood/base-files/etc/init.d/nsa310_fancontrol +++ /dev/null @@ -1,20 +0,0 @@ -#!/bin/sh /etc/rc.common - -START=98 -boot() { -. /lib/functions.sh - -#configuring lm85 onboard temp/fan controller to run the fan on its own -#for more information, please read https://www.kernel.org/doc/Documentation/hwmon/sysfs-interface - -path_to_hwmon='/sys/devices/platform/ocp@f1000000/f1011000.i2c/i2c-0/0-002e/hwmon/hwmon0' - -case $(board_name) in - zyxel,nsa310b) - echo 2 > "$path_to_hwmon/pwm1_enable" # fan is on pwm1 - echo 1 > "$path_to_hwmon/pwm1_auto_channels" # temp1 is the only one that changes - echo 23000 > "$path_to_hwmon/temp1_auto_temp_min" - echo 43000 > "$path_to_hwmon/temp1_auto_temp_max" # next step is 49600 millicelsius, or 50 celsius, 43 celsius is better - ;; -esac -} -- cgit v1.2.3