From 378c7ff282101b204d2a29fa080ed66f2a14940d Mon Sep 17 00:00:00 2001 From: Alexander Couzens Date: Sun, 17 Jan 2021 06:54:04 +0100 Subject: ipq40xx: split generic images into own file In preparation of the new mikrotik subtarget split the generic images into generic.mk Signed-off-by: Alexander Couzens --- target/linux/ipq40xx/image/Makefile | 807 +----------------------------------- 1 file changed, 1 insertion(+), 806 deletions(-) (limited to 'target/linux/ipq40xx/image/Makefile') diff --git a/target/linux/ipq40xx/image/Makefile b/target/linux/ipq40xx/image/Makefile index f10ff002dc..a764cb60af 100644 --- a/target/linux/ipq40xx/image/Makefile +++ b/target/linux/ipq40xx/image/Makefile @@ -1,10 +1,6 @@ include $(TOPDIR)/rules.mk include $(INCLUDE_DIR)/image.mk -DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID -DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION -DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE - define Device/Default PROFILES := Default KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts) @@ -18,807 +14,6 @@ define Device/Default IMAGE/sysupgrade.bin/squashfs := endef -define Device/FitImage - KERNEL_SUFFIX := -fit-uImage.itb - KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb - KERNEL_NAME := Image -endef - -define Device/FitImageLzma - KERNEL_SUFFIX := -fit-uImage.itb - KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb - KERNEL_NAME := Image -endef - -define Device/FitzImage - KERNEL_SUFFIX := -fit-zImage.itb - KERNEL = kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb - KERNEL_NAME := zImage -endef - -define Device/UbiFit - KERNEL_IN_UBI := 1 - IMAGES := nand-factory.ubi nand-sysupgrade.bin - IMAGE/nand-factory.ubi := append-ubi - IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata -endef - -define Device/DniImage - $(call Device/FitzImage) - NETGEAR_BOARD_ID := - NETGEAR_HW_ID := - IMAGES += factory.img - IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni - IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | \ - append-rootfs | pad-rootfs | append-metadata | check-size -endef - -define Build/append-rootfshdr - mkimage -A $(LINUX_KARCH) \ - -O linux -T filesystem \ - -C lzma -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \ - -n root.squashfs -d $(IMAGE_ROOTFS) $@.new - dd if=$@.new bs=64 count=1 >> $(IMAGE_KERNEL) -endef - -define Build/mkmylofw_32m - $(eval device_id=$(word 1,$(1))) - $(eval revision=$(word 2,$(1))) - - let \ - size="$$(stat -c%s $@)" \ - pad="$(subst k,* 1024,$(BLOCKSIZE))" \ - pad="(pad - (size % pad)) % pad" \ - newsize='size + pad'; \ - $(STAGING_DIR_HOST)/bin/mkmylofw \ - -B WPE72 -i 0x11f6:$(device_id):0x11f6:$(device_id) -r $(revision) \ - -s 0x2000000 -p0x180000:$$newsize:al:0x80208000:"OpenWrt":$@ \ - $@.new - @mv $@.new $@ -endef - -define Build/qsdk-ipq-factory-nand-askey - $(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh $@.its\ - askey_kernel $(IMAGE_KERNEL) \ - askey_fs $(IMAGE_ROOTFS) \ - ubifs $@ - PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new - @mv $@.new $@ -endef - -define Build/SenaoFW - -$(STAGING_DIR_HOST)/bin/mksenaofw \ - -n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \ - -c $(DATECODE) -w $(2) -x $(CW_VER) -t 0 \ - -e $@ \ - -o $@.new - @cp $@.new $@ -endef - -define Build/wrgg-image - mkwrggimg -i $@ \ - -o $@.new \ - -d "$(WRGG_DEVNAME)" \ - -s "$(WRGG_SIGNATURE)" \ - -v "" -m "" -B "" - mv $@.new $@ -endef - -define Device/8dev_habanero-dvk - $(call Device/FitImageLzma) - DEVICE_VENDOR := 8devices - DEVICE_MODEL := Habanero DVK - IMAGE_SIZE := 30976k - SOC := qcom-ipq4019 - DEVICE_PACKAGES := ipq-wifi-8dev_habanero-dvk - IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | append-metadata | check-size -endef -TARGET_DEVICES += 8dev_habanero-dvk - -define Device/8dev_jalapeno-common - $(call Device/FitImage) - $(call Device/UbiFit) - BLOCKSIZE := 128k - PAGESIZE := 2048 - SOC := qcom-ipq4018 -endef - -define Device/8dev_jalapeno - $(call Device/8dev_jalapeno-common) - DEVICE_VENDOR := 8devices - DEVICE_MODEL := Jalapeno -endef -TARGET_DEVICES += 8dev_jalapeno - -define Device/alfa-network_ap120c-ac - $(call Device/FitImage) - $(call Device/UbiFit) - DEVICE_VENDOR := ALFA Network - DEVICE_MODEL := AP120C-AC - SOC := qcom-ipq4018 - DEVICE_PACKAGES := kmod-usb-acm \ - kmod-tpm-i2c-atmel uboot-envtools - BLOCKSIZE := 128k - PAGESIZE := 2048 - IMAGE_SIZE := 65536k - IMAGES := nand-factory.bin nand-sysupgrade.bin - IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand -endef -TARGET_DEVICES += alfa-network_ap120c-ac - -define Device/aruba_glenmorangie - $(call Device/FitImageLzma) - DEVICE_VENDOR := Aruba - SOC := qcom-ipq4029 - DEVICE_PACKAGES := ipq-wifi-aruba_ap-303 -endef - -define Device/aruba_ap-303 - $(call Device/aruba_glenmorangie) - DEVICE_MODEL := AP-303 - DEVICE_PACKAGES += uboot-envtools -endef -TARGET_DEVICES += aruba_ap-303 - -define Device/aruba_ap-303h - $(call Device/aruba_glenmorangie) - DEVICE_MODEL := AP-303H -endef -TARGET_DEVICES += aruba_ap-303h - -define Device/aruba_ap-365 - $(call Device/aruba_glenmorangie) - DEVICE_MODEL := AP-365 - DEVICE_PACKAGES += kmod-hwmon-ad7418 uboot-envtools -endef -TARGET_DEVICES += aruba_ap-365 - -define Device/asus_map-ac2200 - $(call Device/FitImageLzma) - DEVICE_VENDOR := ASUS - DEVICE_MODEL := Lyra (MAP-AC2200) - SOC := qcom-ipq4019 - DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-ath3k -endef -TARGET_DEVICES += asus_map-ac2200 - -define Device/asus_rt-ac58u - $(call Device/FitImageLzma) - DEVICE_VENDOR := ASUS - DEVICE_MODEL := RT-AC58U - SOC := qcom-ipq4018 - BLOCKSIZE := 128k - PAGESIZE := 2048 - DTB_SIZE := 65536 - IMAGE_SIZE := 20439364 - FILESYSTEMS := squashfs -# Someone - in their infinite wisdom - decided to put the firmware -# version in front of the image name \03\00\00\04 => Version 3.0.0.4 -# Since u-boot works with strings we either need another fixup step -# to add a version... or we are very careful not to add '\0' into that -# string and call it a day.... Yeah, we do the latter! - UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U') - DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \ - kmod-usb-ledtrig-usbport -endef -TARGET_DEVICES += asus_rt-ac58u - -define Device/avm_fritzbox-4040 - $(call Device/FitImageLzma) - DEVICE_VENDOR := AVM - DEVICE_MODEL := FRITZ!Box 4040 - SOC := qcom-ipq4018 - BOARD_NAME := fritz4040 - IMAGE_SIZE := 29056k - UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-fritz4040.bin - UBOOT_PARTITION_SIZE := 524288 - IMAGES += eva.bin - IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs - IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size - DEVICE_PACKAGES := fritz-tffs fritz-caldata -endef -TARGET_DEVICES += avm_fritzbox-4040 - -define Device/avm_fritzbox-7530 - $(call Device/FitImageLzma) - DEVICE_VENDOR := AVM - DEVICE_MODEL := FRITZ!Box 7530 - SOC := qcom-ipq4019 - DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand -endef -TARGET_DEVICES += avm_fritzbox-7530 - -define Device/avm_fritzrepeater-1200 - $(call Device/FitImageLzma) - DEVICE_VENDOR := AVM - DEVICE_MODEL := FRITZ!Repeater 1200 - SOC := qcom-ipq4019 - DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzrepeater-1200 -endef -TARGET_DEVICES += avm_fritzrepeater-1200 - -define Device/avm_fritzrepeater-3000 - $(call Device/FitImageLzma) - DEVICE_VENDOR := AVM - DEVICE_MODEL := FRITZ!Repeater 3000 - SOC := qcom-ipq4019 - DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand -endef -TARGET_DEVICES += avm_fritzrepeater-3000 - -define Device/buffalo_wtr-m2133hp - $(call Device/FitImage) - $(call Device/UbiFit) - DEVICE_VENDOR := Buffalo - DEVICE_MODEL := WTR-M2133HP - SOC := qcom-ipq4019 - DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9984-ct ipq-wifi-buffalo_wtr-m2133hp - BLOCKSIZE := 128k - PAGESIZE := 2048 -endef -TARGET_DEVICES += buffalo_wtr-m2133hp - -define Device/cellc_rtl30vw - KERNEL_SUFFIX := -fit-uImage.itb - KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb - KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048 - KERNEL_NAME := Image - KERNEL_IN_UBI := - IMAGES := nand-factory.bin nand-sysupgrade.bin - IMAGE/nand-factory.bin := append-rootfshdr | append-ubi | qsdk-ipq-factory-nand-askey - IMAGE/nand-sysupgrade.bin := append-rootfshdr | sysupgrade-tar | append-metadata - DEVICE_VENDOR := Cell C - DEVICE_MODEL := RTL30VW - SOC := qcom-ipq4019 - DEVICE_DTS_CONFIG := config@5 - KERNEL_INSTALL := 1 - KERNEL_SIZE := 4096k - IMAGE_SIZE := 57344k - BLOCKSIZE := 128k - PAGESIZE := 2048 - DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi ipq-wifi-cellc_rtl30vw -endef -TARGET_DEVICES += cellc_rtl30vw - -define Device/cilab_meshpoint-one - $(call Device/8dev_jalapeno-common) - DEVICE_VENDOR := Crisis Innovation Lab - DEVICE_MODEL := MeshPoint.One - DEVICE_PACKAGES := kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127 -endef -TARGET_DEVICES += cilab_meshpoint-one - -define Device/compex_wpj419 - $(call Device/FitImage) - $(call Device/UbiFit) - DEVICE_VENDOR := Compex - DEVICE_MODEL := WPJ419 - SOC := qcom-ipq4019 - DEVICE_DTS_CONFIG := config@12 - KERNEL_INSTALL := 1 - BLOCKSIZE := 128k - PAGESIZE := 2048 - FILESYSTEMS := squashfs -endef -TARGET_DEVICES += compex_wpj419 - -define Device/compex_wpj428 - $(call Device/FitImage) - DEVICE_VENDOR := Compex - DEVICE_MODEL := WPJ428 - SOC := qcom-ipq4028 - DEVICE_DTS_CONFIG := config@4 - BLOCKSIZE := 64k - IMAGE_SIZE := 31232k - KERNEL_SIZE := 4096k - IMAGES += cpximg-6a04.bin - IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata - IMAGE/cpximg-6a04.bin := append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m 0x8A2 3 - DEVICE_PACKAGES := kmod-gpio-beeper -endef -TARGET_DEVICES += compex_wpj428 - -define Device/devolo_magic-2-wifi-next - $(call Device/FitImage) - DEVICE_VENDOR := devolo - DEVICE_MODEL := Magic 2 WiFi next - SOC := qcom-ipq4018 - KERNEL_SIZE := 4096k - - # If the bootloader sees 0xDEADC0DE and this trailer at the 64k boundary of a TFTP image - # it will bootm it, just like we want for the initramfs. - KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to 64k |\ - append-string -e '\xDE\xAD\xC0\xDE{"fl_initramfs":""}\x00' - - IMAGE_SIZE := 26624k - IMAGES := sysupgrade.bin - IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata - DEVICE_PACKAGES := ipq-wifi-devolo_magic-2-wifi-next uboot-envtools -endef -TARGET_DEVICES += devolo_magic-2-wifi-next - -define Device/dlink_dap-2610 - $(call Device/FitImageLzma) - DEVICE_VENDOR := D-Link - DEVICE_MODEL := DAP-2610 - SOC := qcom-ipq4018 - DEVICE_DTS_CONFIG := config@ap.dk01.1-c1 - BLOCKSIZE := 64k - WRGG_DEVNAME := /dev/mtdblock/8 - WRGG_SIGNATURE := wapac30_dkbs_dap2610 - IMAGE_SIZE := 14080k - IMAGES += factory.bin - # Bootloader expects a special 160 byte header which is added by - # wrgg-image. - # Factory image size must be larger than 6MB, and size in wrgg header must - # match actual factory image size to be flashable from D-Link http server. - # Bootloader verifies checksum of wrgg image before booting, thus jffs2 - # cannot be part of the wrgg image. This is solved in the factory image by - # having the rootfs at the end of the image (without pad-rootfs). And in - # the sysupgrade image only the kernel is included in the wrgg checksum, - # but this is not flashable from the D-link http server. - # append-rootfs must start on an erase block boundary. - IMAGE/factory.bin := append-kernel | pad-offset 6144k 160 | append-rootfs | wrgg-image | check-size - IMAGE/sysupgrade.bin := append-kernel | wrgg-image | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata - DEVICE_PACKAGES := ipq-wifi-dlink_dap2610 -endef -TARGET_DEVICES += dlink_dap-2610 - -define Device/edgecore_ecw5211 - $(call Device/FitImage) - $(call Device/UbiFit) - DEVICE_VENDOR := Edgecore - DEVICE_MODEL := ECW5211 - SOC := qcom-ipq4018 - BLOCKSIZE := 128k - PAGESIZE := 2048 - DEVICE_PACKAGES := kmod-tpm-i2c-atmel kmod-usb-acm uboot-envtools -endef -TARGET_DEVICES += edgecore_ecw5211 - -define Device/edgecore_oap100 - $(call Device/FitImage) - $(call Device/UbiFit) - DEVICE_VENDOR := Edgecore - DEVICE_MODEL := OAP100 - SOC := qcom-ipq4019 - BLOCKSIZE := 128k - PAGESIZE := 2048 - IMAGES := nand-sysupgrade.bin - DEVICE_DTS_CONFIG := config@ap.dk07.1-c1 - DEVICE_PACKAGES := ipq-wifi-edgecore_oap100 kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi -endef -TARGET_DEVICES += edgecore_oap100 - -define Device/engenius_eap1300 - $(call Device/FitImage) - DEVICE_VENDOR := EnGenius - DEVICE_MODEL := EAP1300 - DEVICE_DTS_CONFIG := config@4 - BOARD_NAME := eap1300 - SOC := qcom-ipq4018 - KERNEL_SIZE := 5120k - IMAGE_SIZE := 25344k - IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata -endef -TARGET_DEVICES += engenius_eap1300 - -define Device/engenius_eap2200 - $(call Device/FitImage) - $(call Device/UbiFit) - DEVICE_VENDOR := EnGenius - DEVICE_MODEL := EAP2200 - SOC := qcom-ipq4019 - BLOCKSIZE := 128k - PAGESIZE := 2048 - DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-engenius_eap2200 -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers -endef -TARGET_DEVICES += engenius_eap2200 - -define Device/engenius_emd1 - $(call Device/FitImage) - DEVICE_VENDOR := EnGenius - DEVICE_MODEL := EMD1 - DEVICE_DTS_CONFIG := config@4 - SOC := qcom-ipq4018 - IMAGE_SIZE := 30720k - IMAGES += factory.bin - IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata - IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size -endef -TARGET_DEVICES += engenius_emd1 - -define Device/engenius_emr3500 - $(call Device/FitImage) - DEVICE_VENDOR := EnGenius - DEVICE_MODEL := EMR3500 - DEVICE_DTS_CONFIG := config@4 - SOC := qcom-ipq4018 - KERNEL_SIZE := 4096k - IMAGE_SIZE := 30720k - IMAGES += factory.bin - IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata - IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size -endef -TARGET_DEVICES += engenius_emr3500 - -define Device/engenius_ens620ext - $(call Device/FitImage) - DEVICE_VENDOR := EnGenius - DEVICE_MODEL := ENS620EXT - SOC := qcom-ipq4018 - DEVICE_DTS_CONFIG := config@4 - BLOCKSIZE := 64k - PAGESIZE := 256 - BOARD_NAME := ENS620EXT - VENDOR_ID := 0x0101 - PRODUCT_ID := 0x79 - PRODUCT_ID_NEW := 0xA4 - DATECODE := 190507 - FW_VER := 3.1.2 - FW_VER_NEW := 3.5.6 - CW_VER := 1.8.99 - IMAGE_SIZE := 21312k - KERNEL_SIZE := 5120k - FILESYSTEMS := squashfs - IMAGES += factory_30.bin factory_35.bin - IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata - IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER) - IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW) -endef -TARGET_DEVICES += engenius_ens620ext - -define Device/ezviz_cs-w3-wd1200g-eup - $(call Device/FitImage) - DEVICE_VENDOR := EZVIZ - DEVICE_MODEL := CS-W3-WD1200G - DEVICE_VARIANT := EUP - DEVICE_DTS_CONFIG := config@4 - IMAGE_SIZE := 14848k - SOC := qcom-ipq4018 - IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \ - append-metadata - DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \ - ipq-wifi-ezviz_cs-w3-wd1200g-eup -endef -TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup - -define Device/glinet_gl-ap1300 - $(call Device/FitImage) - $(call Device/UbiFit) - DEVICE_VENDOR := GL.iNet - DEVICE_MODEL := GL-AP1300 - SOC := qcom-ipq4018 - DEVICE_DTS_CONFIG := config@ap.dk01.1-c2 - BLOCKSIZE := 128k - PAGESIZE := 2048 - IMAGE_SIZE := 131072k - KERNEL_INSTALL := 1 - DEVICE_PACKAGES := ipq-wifi-glinet_gl-ap1300 -endef -TARGET_DEVICES += glinet_gl-ap1300 - -define Device/glinet_gl-b1300 - $(call Device/FitImage) - DEVICE_VENDOR := GL.iNet - DEVICE_MODEL := GL-B1300 - BOARD_NAME := gl-b1300 - SOC := qcom-ipq4029 - KERNEL_SIZE := 4096k - IMAGE_SIZE := 26624k - IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata -endef -TARGET_DEVICES += glinet_gl-b1300 - -define Device/glinet_gl-s1300 - $(call Device/FitImage) - DEVICE_VENDOR := GL.iNet - DEVICE_MODEL := GL-S1300 - SOC := qcom-ipq4029 - KERNEL_SIZE := 4096k - IMAGE_SIZE := 26624k - IMAGES := sysupgrade.bin - IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata - DEVICE_PACKAGES := ipq-wifi-glinet_gl-s1300 kmod-fs-ext4 kmod-mmc kmod-spi-dev -endef -TARGET_DEVICES += glinet_gl-s1300 - -define Device/linksys_ea6350v3 - # The Linksys EA6350v3 has a uboot bootloader that does not - # support either booting lzma kernel images nor booting UBI - # partitions. This uboot, however, supports raw kernel images and - # gzipped images. - # - # As for the time of writing this, the device will boot the kernel - # from a fixed address with a fixed length of 3MiB. Also, the - # device has a hard-coded kernel command line that requieres the - # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively. - # Oh... and the kernel partition overlaps with the rootfs - # partition (the same for alt_kernel and alt_rootfs). - # - # If you are planing re-partitioning the device, you may want to - # keep those details in mind: - # 1. The kernel adresses you should honor are 0x00000000 and - # 0x02800000 respectively. - # 2. The kernel size (plus the dtb) cannot exceed 3.00MiB in size. - # 3. You can use 'zImage', but not a raw 'Image' packed with lzma. - # 4. The kernel command line from uboot is harcoded to boot with - # rootfs either in mtd11 or mtd13. - $(call Device/FitzImage) - DEVICE_VENDOR := Linksys - DEVICE_MODEL := EA6350 - DEVICE_VARIANT := v3 - SOC := qcom-ipq4018 - BLOCKSIZE := 128k - PAGESIZE := 2048 - KERNEL_SIZE := 3072k - IMAGE_SIZE := 37888k - UBINIZE_OPTS := -E 5 - IMAGES += factory.bin - IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3 - DEVICE_PACKAGES := uboot-envtools -endef -TARGET_DEVICES += linksys_ea6350v3 - -define Device/linksys_ea8300 - $(call Device/FitzImage) - DEVICE_VENDOR := Linksys - DEVICE_MODEL := EA8300 - SOC := qcom-ipq4019 - KERNEL_SIZE := 3072k - IMAGE_SIZE := 87040k - BLOCKSIZE := 128k - PAGESIZE := 2048 - UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF - IMAGES += factory.bin - IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300 - DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport -endef -TARGET_DEVICES += linksys_ea8300 - -define Device/linksys_mr8300 - $(call Device/FitzImage) - DEVICE_VENDOR := Linksys - DEVICE_MODEL := MR8300 - SOC := qcom-ipq4019 - KERNEL_SIZE := 3072k - IMAGE_SIZE := 87040k - BLOCKSIZE := 128k - PAGESIZE := 2048 - UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF - IMAGES += factory.bin - IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300 - DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9888-ct ipq-wifi-linksys_mr8300-v0 kmod-usb-ledtrig-usbport -endef -TARGET_DEVICES += linksys_mr8300 - -define Device/luma_wrtq-329acn - $(call Device/FitImage) - DEVICE_VENDOR := Luma Home - DEVICE_MODEL := WRTQ-329ACN - SOC := qcom-ipq4018 - DEVICE_PACKAGES := ipq-wifi-luma_wrtq-329acn kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio uboot-envtools - IMAGE_SIZE := 76632k - BLOCKSIZE := 128k - PAGESIZE := 2048 -endef -TARGET_DEVICES += luma_wrtq-329acn - -define Device/meraki_mr33 - $(call Device/FitImage) - DEVICE_VENDOR := Cisco Meraki - DEVICE_MODEL := MR33 - SOC := qcom-ipq4029 - BLOCKSIZE := 128k - PAGESIZE := 2048 - DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct -endef -TARGET_DEVICES += meraki_mr33 - -define Device/mobipromo_cm520-79f - $(call Device/FitzImage) - $(call Device/UbiFit) - DEVICE_VENDOR := MobiPromo - DEVICE_MODEL := CM520-79F - SOC := qcom-ipq4019 - BLOCKSIZE := 128k - PAGESIZE := 2048 - DEVICE_PACKAGES := ipq-wifi-mobipromo_cm520-79f kmod-usb-ledtrig-usbport -endef -TARGET_DEVICES += mobipromo_cm520-79f - -define Device/netgear_ex61x0v2 - $(call Device/DniImage) - DEVICE_VENDOR := NETGEAR - DEVICE_DTS_CONFIG := config@4 - NETGEAR_BOARD_ID := EX6150v2series - NETGEAR_HW_ID := 29765285+16+0+128+2x2 - IMAGE_SIZE := 14400k - SOC := qcom-ipq4018 -endef - -define Device/netgear_ex6100v2 - $(call Device/netgear_ex61x0v2) - DEVICE_MODEL := EX6100 - DEVICE_VARIANT := v2 -endef -TARGET_DEVICES += netgear_ex6100v2 - -define Device/netgear_ex6150v2 - $(call Device/netgear_ex61x0v2) - DEVICE_MODEL := EX6150 - DEVICE_VARIANT := v2 -endef -TARGET_DEVICES += netgear_ex6150v2 - -define Device/openmesh_a42 - $(call Device/FitImageLzma) - DEVICE_VENDOR := OpenMesh - DEVICE_MODEL := A42 - SOC := qcom-ipq4018 - DEVICE_DTS_CONFIG := config@om.a42 - BLOCKSIZE := 64k - KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE) - IMAGE_SIZE := 15616k - IMAGES += factory.bin - IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42 - IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata - DEVICE_PACKAGES := uboot-envtools -endef -TARGET_DEVICES += openmesh_a42 - -define Device/openmesh_a62 - $(call Device/FitImageLzma) - DEVICE_VENDOR := OpenMesh - DEVICE_MODEL := A62 - SOC := qcom-ipq4019 - DEVICE_DTS_CONFIG := config@om.a62 - BLOCKSIZE := 64k - KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE) - IMAGE_SIZE := 15552k - IMAGES += factory.bin - IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62 - IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata - DEVICE_PACKAGES := ath10k-firmware-qca9888-ct uboot-envtools -endef -TARGET_DEVICES += openmesh_a62 - -define Device/plasmacloud_pa1200 - $(call Device/FitImageLzma) - DEVICE_VENDOR := Plasma Cloud - DEVICE_MODEL := PA1200 - SOC := qcom-ipq4018 - DEVICE_DTS_CONFIG := config@pc.pa1200 - BLOCKSIZE := 64k - KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE) - IMAGE_SIZE := 15616k - IMAGES += factory.bin - IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200 - IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata - DEVICE_PACKAGES := uboot-envtools ipq-wifi-plasmacloud-pa1200 -endef -TARGET_DEVICES += plasmacloud_pa1200 - -define Device/plasmacloud_pa2200 - $(call Device/FitImageLzma) - DEVICE_VENDOR := Plasma Cloud - DEVICE_MODEL := PA2200 - SOC := qcom-ipq4019 - DEVICE_DTS_CONFIG := config@pc.pa2200 - BLOCKSIZE := 64k - KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE) - IMAGE_SIZE := 15552k - IMAGES += factory.bin - IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200 - IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata - DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-plasmacloud-pa2200 uboot-envtools -endef -TARGET_DEVICES += plasmacloud_pa2200 - -define Device/qcom_ap-dk01.1-c1 - DEVICE_VENDOR := Qualcomm Atheros - DEVICE_MODEL := AP-DK01.1 - DEVICE_VARIANT := C1 - BOARD_NAME := ap-dk01.1-c1 - SOC := qcom-ipq4019 - DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1 - KERNEL_INSTALL := 1 - KERNEL_SIZE := 4096k - IMAGE_SIZE := 26624k - $(call Device/FitImage) - IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata -endef -TARGET_DEVICES += qcom_ap-dk01.1-c1 - -define Device/qcom_ap-dk04.1-c1 - $(call Device/FitImage) - $(call Device/UbiFit) - DEVICE_VENDOR := Qualcomm Atheros - DEVICE_MODEL := AP-DK04.1 - DEVICE_VARIANT := C1 - SOC := qcom-ipq4019 - DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1 - KERNEL_INSTALL := 1 - KERNEL_SIZE := 4048k - BLOCKSIZE := 128k - PAGESIZE := 2048 - BOARD_NAME := ap-dk04.1-c1 -endef -TARGET_DEVICES += qcom_ap-dk04.1-c1 - -define Device/qxwlan_e2600ac-c1 - $(call Device/FitImage) - DEVICE_VENDOR := Qxwlan - DEVICE_MODEL := E2600AC - DEVICE_VARIANT := C1 - BOARD_NAME := e2600ac-c1 - SOC := qcom-ipq4019 - KERNEL_SIZE := 4096k - IMAGE_SIZE := 31232k - IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata - DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac -endef -TARGET_DEVICES += qxwlan_e2600ac-c1 - -define Device/qxwlan_e2600ac-c2 - $(call Device/FitImage) - $(call Device/UbiFit) - DEVICE_VENDOR := Qxwlan - DEVICE_MODEL := E2600AC - DEVICE_VARIANT := C2 - SOC := qcom-ipq4019 - KERNEL_INSTALL := 1 - BLOCKSIZE := 128k - PAGESIZE := 2048 - DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac -endef -TARGET_DEVICES += qxwlan_e2600ac-c2 - -define Device/unielec_u4019-32m - $(call Device/FitImage) - DEVICE_VENDOR := Unielec - DEVICE_MODEL := U4019 - DEVICE_VARIANT := 32M - BOARD_NAME := u4019-32m - SOC := qcom-ipq4019 - KERNEL_SIZE := 4096k - IMAGE_SIZE := 31232k - IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata -endef -TARGET_DEVICES += unielec_u4019-32m - -define Device/zyxel_nbg6617 - $(call Device/FitImageLzma) - DEVICE_VENDOR := ZyXEL - DEVICE_MODEL := NBG6617 - SOC := qcom-ipq4018 - KERNEL_SIZE := 4096k - ROOTFS_SIZE := 24960k - RAS_BOARD := NBG6617 - RAS_ROOTFS_SIZE := 19840k - RAS_VERSION := "$(VERSION_DIST) $(REVISION)" - IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata - IMAGES += factory.bin -# The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is -# at least as large as the one of the initial firmware image (not the current -# one on the device). This only applies to the Web-UI, the bootlaoder ignores -# this minimum-size. However, the larger image can be flashed both ways. - IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel - IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata - DEVICE_PACKAGES := uboot-envtools kmod-usb-ledtrig-usbport -endef -TARGET_DEVICES += zyxel_nbg6617 - -define Device/zyxel_wre6606 - $(call Device/FitImage) - DEVICE_VENDOR := ZyXEL - DEVICE_MODEL := WRE6606 - DEVICE_DTS_CONFIG := config@4 - SOC := qcom-ipq4018 - IMAGE_SIZE := 13184k - IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size - DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers -endef -TARGET_DEVICES += zyxel_wre6606 +include $(SUBTARGET).mk $(eval $(call BuildImage)) -- cgit v1.2.3