From dce36465ad4b17274d9256b8e39b6d877bb4beff Mon Sep 17 00:00:00 2001
From: Luka Perkov <luka@openwrt.org>
Date: Mon, 12 May 2014 12:29:22 +0000
Subject: imx6: drop support for 3.13

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40754
---
 ...-PCI-fixup-for-PEX860X-on-Gateworks-board.patch | 68 ----------------------
 1 file changed, 68 deletions(-)
 delete mode 100644 target/linux/imx6/patches-3.13/0004-imx-add-PCI-fixup-for-PEX860X-on-Gateworks-board.patch

(limited to 'target/linux/imx6/patches-3.13/0004-imx-add-PCI-fixup-for-PEX860X-on-Gateworks-board.patch')

diff --git a/target/linux/imx6/patches-3.13/0004-imx-add-PCI-fixup-for-PEX860X-on-Gateworks-board.patch b/target/linux/imx6/patches-3.13/0004-imx-add-PCI-fixup-for-PEX860X-on-Gateworks-board.patch
deleted file mode 100644
index 93f1ee4e28..0000000000
--- a/target/linux/imx6/patches-3.13/0004-imx-add-PCI-fixup-for-PEX860X-on-Gateworks-board.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From 4bb1d09fe48f51efac2f51b9280796e2d00a6c4a Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Tue, 22 Oct 2013 21:51:28 -0700
-Subject: [PATCH] ARM: imx: add PCI fixup for PEX860X on Gateworks board
-
-The PEX860X has GPIO's which are used for PCI Reset lines on the
-Gateworks Ventana boards.  The GPIO's need to be set as output
-level high so as to allow the PCIe devices to come out of reset.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/mach-imx/mach-imx6q.c | 30 ++++++++++++++++++++++++++++++
- 1 file changed, 30 insertions(+)
-
---- a/arch/arm/mach-imx/mach-imx6q.c
-+++ b/arch/arm/mach-imx/mach-imx6q.c
-@@ -13,6 +13,7 @@
- #include <linux/clk.h>
- #include <linux/clkdev.h>
- #include <linux/cpu.h>
-+#include <linux/delay.h>
- #include <linux/export.h>
- #include <linux/init.h>
- #include <linux/io.h>
-@@ -23,6 +24,7 @@
- #include <linux/of_irq.h>
- #include <linux/of_platform.h>
- #include <linux/pm_opp.h>
-+#include <linux/pci.h>
- #include <linux/phy.h>
- #include <linux/reboot.h>
- #include <linux/regmap.h>
-@@ -78,6 +80,34 @@ static int ksz9031rn_phy_fixup(struct ph
- 	return 0;
- }
- 
-+/*
-+ * fixup for PLX PEX8909 bridge to configure GPIO1-7 as output High
-+ * as they are used for slots1-7 PERST#
-+ */
-+static void ventana_pciesw_early_fixup(struct pci_dev *dev)
-+{
-+	u32 dw;
-+
-+	if (!of_machine_is_compatible("gw,ventana"))
-+		return;
-+
-+	if (dev->devfn != 0)
-+		return;
-+
-+	pci_read_config_dword(dev, 0x62c, &dw);
-+	dw |= 0xaaa8; // GPIO1-7 outputs
-+	pci_write_config_dword(dev, 0x62c, dw);
-+
-+	pci_read_config_dword(dev, 0x644, &dw);
-+	dw |= 0xfe;   // GPIO1-7 output high
-+	pci_write_config_dword(dev, 0x644, dw);
-+
-+	msleep(100);
-+}
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8609, ventana_pciesw_early_fixup);
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8606, ventana_pciesw_early_fixup);
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8604, ventana_pciesw_early_fixup);
-+
- static int ar8031_phy_fixup(struct phy_device *dev)
- {
- 	u16 val;
-- 
cgit v1.2.3