From c7f8cb3f4f55d187a56c3166793f906a19805358 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Fri, 19 Jul 2013 12:02:34 +0000 Subject: kernel: update bcma and ssb to version from wireless-testing/master tag master-2013-07-18 This should fix some build problems in b43 with kernel 3.3. Signed-off-by: Hauke Mehrtens SVN-Revision: 37432 --- .../linux/generic/patches-3.6/020-ssb_update.patch | 1475 ++++++++++++++++++-- .../generic/patches-3.6/025-bcma_backport.patch | 1188 ++++++++++++++-- 2 files changed, 2473 insertions(+), 190 deletions(-) (limited to 'target/linux/generic/patches-3.6') diff --git a/target/linux/generic/patches-3.6/020-ssb_update.patch b/target/linux/generic/patches-3.6/020-ssb_update.patch index 6f9c8342d0..2d134583cf 100644 --- a/target/linux/generic/patches-3.6/020-ssb_update.patch +++ b/target/linux/generic/patches-3.6/020-ssb_update.patch @@ -30,7 +30,7 @@ ARRAY_SIZE(wgt634u_devices)); --- a/drivers/ssb/Kconfig +++ b/drivers/ssb/Kconfig -@@ -136,6 +136,11 @@ config SSB_DRIVER_MIPS +@@ -136,10 +136,15 @@ config SSB_DRIVER_MIPS If unsure, say N @@ -42,6 +42,11 @@ # Assumption: We are on embedded, if we compile the MIPS core. config SSB_EMBEDDED bool +- depends on SSB_DRIVER_MIPS ++ depends on SSB_DRIVER_MIPS && SSB_PCICORE_HOSTMODE + default y + + config SSB_DRIVER_EXTIF @@ -160,4 +165,12 @@ config SSB_DRIVER_GIGE If unsure, say N @@ -98,7 +103,7 @@ #include "ssb_private.h" -@@ -280,10 +282,76 @@ static void calc_fast_powerup_delay(stru +@@ -280,13 +282,79 @@ static void calc_fast_powerup_delay(stru cc->fast_pwrup_delay = tmp; } @@ -174,7 +179,11 @@ + if (cc->dev->id.revision >= 11) cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT); - ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status); +- ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status); ++ ssb_dbg("chipcommon status is 0x%x\n", cc->status); + + if (cc->dev->id.revision >= 20) { + chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0); @@ -297,6 +365,11 @@ void ssb_chipcommon_init(struct ssb_chip chipco_powercontrol_init(cc); ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); @@ -333,16 +342,62 @@ /* Turn off UART clock before switching clocksource. */ --- a/drivers/ssb/driver_chipcommon_pmu.c +++ b/drivers/ssb/driver_chipcommon_pmu.c -@@ -346,6 +346,8 @@ static void ssb_pmu_pll_init(struct ssb_ +@@ -110,8 +110,8 @@ static void ssb_pmu0_pllinit_r0(struct s + return; + } + +- ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n", +- (crystalfreq / 1000), (crystalfreq % 1000)); ++ ssb_info("Programming PLL to %u.%03u MHz\n", ++ crystalfreq / 1000, crystalfreq % 1000); + + /* First turn the PLL off. */ + switch (bus->chip_id) { +@@ -138,7 +138,7 @@ static void ssb_pmu0_pllinit_r0(struct s + } + tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST); + if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT) +- ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n"); ++ ssb_emerg("Failed to turn the PLL off!\n"); + + /* Set PDIV in PLL control 0. */ + pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL0); +@@ -249,8 +249,8 @@ static void ssb_pmu1_pllinit_r0(struct s + return; + } + +- ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n", +- (crystalfreq / 1000), (crystalfreq % 1000)); ++ ssb_info("Programming PLL to %u.%03u MHz\n", ++ crystalfreq / 1000, crystalfreq % 1000); + + /* First turn the PLL off. */ + switch (bus->chip_id) { +@@ -275,7 +275,7 @@ static void ssb_pmu1_pllinit_r0(struct s + } + tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST); + if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT) +- ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n"); ++ ssb_emerg("Failed to turn the PLL off!\n"); + + /* Set p1div and p2div. */ + pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0); +@@ -346,10 +346,11 @@ static void ssb_pmu_pll_init(struct ssb_ chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, 0x380005C0); } break; + case 43222: + break; default: - ssb_printk(KERN_ERR PFX - "ERROR: PLL init unknown for device %04X\n", -@@ -434,6 +436,7 @@ static void ssb_pmu_resources_init(struc +- ssb_printk(KERN_ERR PFX +- "ERROR: PLL init unknown for device %04X\n", +- bus->chip_id); ++ ssb_err("ERROR: PLL init unknown for device %04X\n", ++ bus->chip_id); + } + } + +@@ -434,6 +435,7 @@ static void ssb_pmu_resources_init(struc min_msk = 0xCBB; break; case 0x4322: @@ -350,7 +405,30 @@ /* We keep the default settings: * min_msk = 0xCBB * max_msk = 0x7FFFF -@@ -615,6 +618,33 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch +@@ -469,9 +471,8 @@ static void ssb_pmu_resources_init(struc + max_msk = 0xFFFFF; + break; + default: +- ssb_printk(KERN_ERR PFX +- "ERROR: PMU resource config unknown for device %04X\n", +- bus->chip_id); ++ ssb_err("ERROR: PMU resource config unknown for device %04X\n", ++ bus->chip_id); + } + + if (updown_tab) { +@@ -523,8 +524,8 @@ void ssb_pmu_init(struct ssb_chipcommon + pmucap = chipco_read32(cc, SSB_CHIPCO_PMU_CAP); + cc->pmu.rev = (pmucap & SSB_CHIPCO_PMU_CAP_REVISION); + +- ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n", +- cc->pmu.rev, pmucap); ++ ssb_dbg("Found rev %u PMU (capabilities 0x%08X)\n", ++ cc->pmu.rev, pmucap); + + if (cc->pmu.rev == 1) + chipco_mask32(cc, SSB_CHIPCO_PMU_CTL, +@@ -615,6 +616,32 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage); EXPORT_SYMBOL(ssb_pmu_set_ldo_paref); @@ -374,9 +452,8 @@ + case 0x5354: + ssb_pmu_get_alp_clock_clk0(cc); + default: -+ ssb_printk(KERN_ERR PFX -+ "ERROR: PMU alp clock unknown for device %04X\n", -+ bus->chip_id); ++ ssb_err("ERROR: PMU alp clock unknown for device %04X\n", ++ bus->chip_id); + return 0; + } +} @@ -384,7 +461,27 @@ u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc) { struct ssb_bus *bus = cc->dev->bus; -@@ -645,3 +675,32 @@ u32 ssb_pmu_get_controlclock(struct ssb_ +@@ -624,9 +651,8 @@ u32 ssb_pmu_get_cpu_clock(struct ssb_chi + /* 5354 chip uses a non programmable PLL of frequency 240MHz */ + return 240000000; + default: +- ssb_printk(KERN_ERR PFX +- "ERROR: PMU cpu clock unknown for device %04X\n", +- bus->chip_id); ++ ssb_err("ERROR: PMU cpu clock unknown for device %04X\n", ++ bus->chip_id); + return 0; + } + } +@@ -639,9 +665,52 @@ u32 ssb_pmu_get_controlclock(struct ssb_ + case 0x5354: + return 120000000; + default: +- ssb_printk(KERN_ERR PFX +- "ERROR: PMU controlclock unknown for device %04X\n", +- bus->chip_id); ++ ssb_err("ERROR: PMU controlclock unknown for device %04X\n", ++ bus->chip_id); return 0; } } @@ -405,8 +502,23 @@ + pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD; + break; + case 43222: -+ /* TODO: BCM43222 requires updating PLLs too */ -+ return; ++ if (spuravoid == 1) { ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11500008); ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0C000C06); ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x0F600a08); ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000); ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x2001E920); ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888815); ++ } else { ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100008); ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0c000c06); ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x03000a08); ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000); ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x200005c0); ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888855); ++ } ++ pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD; ++ break; + default: + ssb_printk(KERN_ERR PFX + "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n", @@ -419,7 +531,7 @@ +EXPORT_SYMBOL_GPL(ssb_pmu_spuravoid_pllupdate); --- /dev/null +++ b/drivers/ssb/driver_chipcommon_sflash.c -@@ -0,0 +1,18 @@ +@@ -0,0 +1,166 @@ +/* + * Sonics Silicon Backplane + * ChipCommon serial flash interface @@ -431,9 +543,157 @@ + +#include "ssb_private.h" + ++static struct resource ssb_sflash_resource = { ++ .name = "ssb_sflash", ++ .start = SSB_FLASH2, ++ .end = 0, ++ .flags = IORESOURCE_MEM | IORESOURCE_READONLY, ++}; ++ ++struct platform_device ssb_sflash_dev = { ++ .name = "ssb_sflash", ++ .resource = &ssb_sflash_resource, ++ .num_resources = 1, ++}; ++ ++struct ssb_sflash_tbl_e { ++ char *name; ++ u32 id; ++ u32 blocksize; ++ u16 numblocks; ++}; ++ ++static const struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = { ++ { "M25P20", 0x11, 0x10000, 4, }, ++ { "M25P40", 0x12, 0x10000, 8, }, ++ ++ { "M25P16", 0x14, 0x10000, 32, }, ++ { "M25P32", 0x15, 0x10000, 64, }, ++ { "M25P64", 0x16, 0x10000, 128, }, ++ { "M25FL128", 0x17, 0x10000, 256, }, ++ { 0 }, ++}; ++ ++static const struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = { ++ { "SST25WF512", 1, 0x1000, 16, }, ++ { "SST25VF512", 0x48, 0x1000, 16, }, ++ { "SST25WF010", 2, 0x1000, 32, }, ++ { "SST25VF010", 0x49, 0x1000, 32, }, ++ { "SST25WF020", 3, 0x1000, 64, }, ++ { "SST25VF020", 0x43, 0x1000, 64, }, ++ { "SST25WF040", 4, 0x1000, 128, }, ++ { "SST25VF040", 0x44, 0x1000, 128, }, ++ { "SST25VF040B", 0x8d, 0x1000, 128, }, ++ { "SST25WF080", 5, 0x1000, 256, }, ++ { "SST25VF080B", 0x8e, 0x1000, 256, }, ++ { "SST25VF016", 0x41, 0x1000, 512, }, ++ { "SST25VF032", 0x4a, 0x1000, 1024, }, ++ { "SST25VF064", 0x4b, 0x1000, 2048, }, ++ { 0 }, ++}; ++ ++static const struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = { ++ { "AT45DB011", 0xc, 256, 512, }, ++ { "AT45DB021", 0x14, 256, 1024, }, ++ { "AT45DB041", 0x1c, 256, 2048, }, ++ { "AT45DB081", 0x24, 256, 4096, }, ++ { "AT45DB161", 0x2c, 512, 4096, }, ++ { "AT45DB321", 0x34, 512, 8192, }, ++ { "AT45DB642", 0x3c, 1024, 8192, }, ++ { 0 }, ++}; ++ ++static void ssb_sflash_cmd(struct ssb_chipcommon *cc, u32 opcode) ++{ ++ int i; ++ chipco_write32(cc, SSB_CHIPCO_FLASHCTL, ++ SSB_CHIPCO_FLASHCTL_START | opcode); ++ for (i = 0; i < 1000; i++) { ++ if (!(chipco_read32(cc, SSB_CHIPCO_FLASHCTL) & ++ SSB_CHIPCO_FLASHCTL_BUSY)) ++ return; ++ cpu_relax(); ++ } ++ pr_err("SFLASH control command failed (timeout)!\n"); ++} ++ +/* Initialize serial flash access */ +int ssb_sflash_init(struct ssb_chipcommon *cc) +{ ++ struct ssb_sflash *sflash = &cc->dev->bus->mipscore.sflash; ++ const struct ssb_sflash_tbl_e *e; ++ u32 id, id2; ++ ++ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) { ++ case SSB_CHIPCO_FLASHT_STSER: ++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_DP); ++ ++ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 0); ++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES); ++ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA); ++ ++ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 1); ++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES); ++ id2 = chipco_read32(cc, SSB_CHIPCO_FLASHDATA); ++ ++ switch (id) { ++ case 0xbf: ++ for (e = ssb_sflash_sst_tbl; e->name; e++) { ++ if (e->id == id2) ++ break; ++ } ++ break; ++ case 0x13: ++ return -ENOTSUPP; ++ default: ++ for (e = ssb_sflash_st_tbl; e->name; e++) { ++ if (e->id == id) ++ break; ++ } ++ break; ++ } ++ if (!e->name) { ++ pr_err("Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n", ++ id, id2); ++ return -ENOTSUPP; ++ } ++ ++ break; ++ case SSB_CHIPCO_FLASHT_ATSER: ++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS); ++ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA) & 0x3c; ++ ++ for (e = ssb_sflash_at_tbl; e->name; e++) { ++ if (e->id == id) ++ break; ++ } ++ if (!e->name) { ++ pr_err("Unsupported Atmel serial flash (id: 0x%X)\n", ++ id); ++ return -ENOTSUPP; ++ } ++ ++ break; ++ default: ++ pr_err("Unsupported flash type\n"); ++ return -ENOTSUPP; ++ } ++ ++ sflash->window = SSB_FLASH2; ++ sflash->blocksize = e->blocksize; ++ sflash->numblocks = e->numblocks; ++ sflash->size = sflash->blocksize * sflash->numblocks; ++ sflash->present = true; ++ ++ pr_info("Found %s serial flash (blocksize: 0x%X, blocks: %d)\n", ++ e->name, e->blocksize, e->numblocks); ++ ++ /* Prepare platform device, but don't register it yet. It's too early, ++ * malloc (required by device_private_init) is not available yet. */ ++ ssb_sflash_dev.resource[0].end = ssb_sflash_dev.resource[0].start + ++ sflash->size; ++ ssb_sflash_dev.dev.platform_data = sflash; ++ + pr_err("Serial flash support is not implemented yet!\n"); + + return -ENOTSUPP; @@ -537,7 +797,7 @@ } --- /dev/null +++ b/drivers/ssb/driver_gpio.c -@@ -0,0 +1,176 @@ +@@ -0,0 +1,210 @@ +/* + * Sonics Silicon Backplane + * GPIO driver @@ -614,6 +874,16 @@ + ssb_chipco_gpio_pullup(&bus->chipco, 1 << gpio, 0); +} + ++static int ssb_gpio_chipco_to_irq(struct gpio_chip *chip, unsigned gpio) ++{ ++ struct ssb_bus *bus = ssb_gpio_get_bus(chip); ++ ++ if (bus->bustype == SSB_BUSTYPE_SSB) ++ return ssb_mips_irq(bus->chipco.dev) + 2; ++ else ++ return -EINVAL; ++} ++ +static int ssb_gpio_chipco_init(struct ssb_bus *bus) +{ + struct gpio_chip *chip = &bus->gpio; @@ -626,6 +896,7 @@ + chip->set = ssb_gpio_chipco_set_value; + chip->direction_input = ssb_gpio_chipco_direction_input; + chip->direction_output = ssb_gpio_chipco_direction_output; ++ chip->to_irq = ssb_gpio_chipco_to_irq; + chip->ngpio = 16; + /* There is just one SoC in one device and its GPIO addresses should be + * deterministic to address them more easily. The other buses could get @@ -674,6 +945,16 @@ + return 0; +} + ++static int ssb_gpio_extif_to_irq(struct gpio_chip *chip, unsigned gpio) ++{ ++ struct ssb_bus *bus = ssb_gpio_get_bus(chip); ++ ++ if (bus->bustype == SSB_BUSTYPE_SSB) ++ return ssb_mips_irq(bus->extif.dev) + 2; ++ else ++ return -EINVAL; ++} ++ +static int ssb_gpio_extif_init(struct ssb_bus *bus) +{ + struct gpio_chip *chip = &bus->gpio; @@ -684,6 +965,7 @@ + chip->set = ssb_gpio_extif_set_value; + chip->direction_input = ssb_gpio_extif_direction_input; + chip->direction_output = ssb_gpio_extif_direction_output; ++ chip->to_irq = ssb_gpio_extif_to_irq; + chip->ngpio = 5; + /* There is just one SoC in one device and its GPIO addresses should be + * deterministic to address them more easily. The other buses could get @@ -714,9 +996,88 @@ + + return -1; +} ++ ++int ssb_gpio_unregister(struct ssb_bus *bus) ++{ ++ if (ssb_chipco_available(&bus->chipco) || ++ ssb_extif_available(&bus->extif)) { ++ return gpiochip_remove(&bus->gpio); ++ } else { ++ SSB_WARN_ON(1); ++ } ++ ++ return -1; ++} --- a/drivers/ssb/driver_mipscore.c +++ b/drivers/ssb/driver_mipscore.c -@@ -178,9 +178,9 @@ static void ssb_mips_serial_init(struct +@@ -10,6 +10,7 @@ + + #include + ++#include + #include + #include + #include +@@ -17,6 +18,25 @@ + + #include "ssb_private.h" + ++static const char * const part_probes[] = { "bcm47xxpart", NULL }; ++ ++static struct physmap_flash_data ssb_pflash_data = { ++ .part_probe_types = part_probes, ++}; ++ ++static struct resource ssb_pflash_resource = { ++ .name = "ssb_pflash", ++ .flags = IORESOURCE_MEM, ++}; ++ ++struct platform_device ssb_pflash_dev = { ++ .name = "physmap-flash", ++ .dev = { ++ .platform_data = &ssb_pflash_data, ++ }, ++ .resource = &ssb_pflash_resource, ++ .num_resources = 1, ++}; + + static inline u32 mips_read32(struct ssb_mipscore *mcore, + u16 offset) +@@ -147,21 +167,22 @@ static void set_irq(struct ssb_device *d + irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]); + ssb_write32(mdev, SSB_IPSFLAG, irqflag); + } +- ssb_dprintk(KERN_INFO PFX +- "set_irq: core 0x%04x, irq %d => %d\n", +- dev->id.coreid, oldirq+2, irq+2); ++ ssb_dbg("set_irq: core 0x%04x, irq %d => %d\n", ++ dev->id.coreid, oldirq+2, irq+2); + } + + static void print_irq(struct ssb_device *dev, unsigned int irq) + { +- int i; + static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; +- ssb_dprintk(KERN_INFO PFX +- "core 0x%04x, irq :", dev->id.coreid); +- for (i = 0; i <= 6; i++) { +- ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" "); +- } +- ssb_dprintk("\n"); ++ ssb_dbg("core 0x%04x, irq : %s%s %s%s %s%s %s%s %s%s %s%s %s%s\n", ++ dev->id.coreid, ++ irq_name[0], irq == 0 ? "*" : " ", ++ irq_name[1], irq == 1 ? "*" : " ", ++ irq_name[2], irq == 2 ? "*" : " ", ++ irq_name[3], irq == 3 ? "*" : " ", ++ irq_name[4], irq == 4 ? "*" : " ", ++ irq_name[5], irq == 5 ? "*" : " ", ++ irq_name[6], irq == 6 ? "*" : " "); + } + + static void dump_irq(struct ssb_bus *bus) +@@ -178,9 +199,9 @@ static void ssb_mips_serial_init(struct { struct ssb_bus *bus = mcore->dev->bus; @@ -728,9 +1089,11 @@ mcore->nr_serial_ports = ssb_chipco_serial_init(&bus->chipco, mcore->serial_ports); else mcore->nr_serial_ports = 0; -@@ -190,16 +190,33 @@ static void ssb_mips_flash_detect(struct +@@ -189,17 +210,42 @@ static void ssb_mips_serial_init(struct + static void ssb_mips_flash_detect(struct ssb_mipscore *mcore) { struct ssb_bus *bus = mcore->dev->bus; ++ struct ssb_pflash *pflash = &mcore->pflash; - mcore->flash_buswidth = 2; - if (bus->chipco.dev) { @@ -738,11 +1101,11 @@ - mcore->flash_window_size = 0x02000000; + /* When there is no chipcommon on the bus there is 4MB flash */ + if (!ssb_chipco_available(&bus->chipco)) { -+ mcore->pflash.present = true; -+ mcore->pflash.buswidth = 2; -+ mcore->pflash.window = SSB_FLASH1; -+ mcore->pflash.window_size = SSB_FLASH1_SZ; -+ return; ++ pflash->present = true; ++ pflash->buswidth = 2; ++ pflash->window = SSB_FLASH1; ++ pflash->window_size = SSB_FLASH1_SZ; ++ goto ssb_pflash; + } + + /* There is ChipCommon, so use it to read info about flash */ @@ -754,23 +1117,30 @@ + break; + case SSB_CHIPCO_FLASHT_PARA: + pr_debug("Found parallel flash\n"); -+ mcore->pflash.present = true; -+ mcore->pflash.window = SSB_FLASH2; -+ mcore->pflash.window_size = SSB_FLASH2_SZ; ++ pflash->present = true; ++ pflash->window = SSB_FLASH2; ++ pflash->window_size = SSB_FLASH2_SZ; if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG) & SSB_CHIPCO_CFG_DS16) == 0) - mcore->flash_buswidth = 1; - } else { - mcore->flash_window = 0x1fc00000; - mcore->flash_window_size = 0x00400000; -+ mcore->pflash.buswidth = 1; ++ pflash->buswidth = 1; + else -+ mcore->pflash.buswidth = 2; ++ pflash->buswidth = 2; + break; ++ } ++ ++ssb_pflash: ++ if (pflash->present) { ++ ssb_pflash_data.width = pflash->buswidth; ++ ssb_pflash_resource.start = pflash->window; ++ ssb_pflash_resource.end = pflash->window + pflash->window_size; } } -@@ -211,9 +228,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m +@@ -211,9 +257,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) return ssb_pmu_get_cpu_clock(&bus->chipco); @@ -782,7 +1152,16 @@ ssb_chipco_get_clockcpu(&bus->chipco, &pll_type, &n, &m); } else return 0; -@@ -249,9 +266,9 @@ void ssb_mipscore_init(struct ssb_mipsco +@@ -241,7 +287,7 @@ void ssb_mipscore_init(struct ssb_mipsco + if (!mcore->dev) + return; /* We don't have a MIPS core */ + +- ssb_dprintk(KERN_INFO PFX "Initializing MIPS core...\n"); ++ ssb_dbg("Initializing MIPS core...\n"); + + bus = mcore->dev->bus; + hz = ssb_clockspeed(bus); +@@ -249,9 +295,9 @@ void ssb_mipscore_init(struct ssb_mipsco hz = 100000000; ns = 1000000000 / hz; @@ -794,6 +1173,71 @@ ssb_chipco_timing_init(&bus->chipco, ns); /* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */ +@@ -289,7 +335,7 @@ void ssb_mipscore_init(struct ssb_mipsco + break; + } + } +- ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n"); ++ ssb_dbg("after irq reconfiguration\n"); + dump_irq(bus); + + ssb_mips_serial_init(mcore); +--- a/drivers/ssb/driver_pcicore.c ++++ b/drivers/ssb/driver_pcicore.c +@@ -263,8 +263,7 @@ int ssb_pcicore_plat_dev_init(struct pci + return -ENODEV; + } + +- ssb_printk(KERN_INFO "PCI: Fixing up device %s\n", +- pci_name(d)); ++ ssb_info("PCI: Fixing up device %s\n", pci_name(d)); + + /* Fix up interrupt lines */ + d->irq = ssb_mips_irq(extpci_core->dev) + 2; +@@ -285,12 +284,12 @@ static void ssb_pcicore_fixup_pcibridge( + if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0) + return; + +- ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev)); ++ ssb_info("PCI: Fixing up bridge %s\n", pci_name(dev)); + + /* Enable PCI bridge bus mastering and memory space */ + pci_set_master(dev); + if (pcibios_enable_device(dev, ~0) < 0) { +- ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n"); ++ ssb_err("PCI: SSB bridge enable failed\n"); + return; + } + +@@ -299,8 +298,8 @@ static void ssb_pcicore_fixup_pcibridge( + + /* Make sure our latency is high enough to handle the devices behind us */ + lat = 168; +- ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n", +- pci_name(dev), lat); ++ ssb_info("PCI: Fixing latency timer of device %s to %u\n", ++ pci_name(dev), lat); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); + } + DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge); +@@ -323,7 +322,7 @@ static void __devinit ssb_pcicore_init_h + return; + extpci_core = pc; + +- ssb_dprintk(KERN_INFO PFX "PCIcore in host mode found\n"); ++ ssb_dbg("PCIcore in host mode found\n"); + /* Reset devices on the external PCI bus */ + val = SSB_PCICORE_CTL_RST_OE; + val |= SSB_PCICORE_CTL_CLK_OE; +@@ -338,7 +337,7 @@ static void __devinit ssb_pcicore_init_h + udelay(1); /* Assertion time demanded by the PCI standard */ + + if (pc->dev->bus->has_cardbus_slot) { +- ssb_dprintk(KERN_INFO PFX "CardBus slot detected\n"); ++ ssb_dbg("CardBus slot detected\n"); + pc->cardbusmode = 1; + /* GPIO 1 resets the bridge */ + ssb_gpio_out(pc->dev->bus, 1, 1); --- a/drivers/ssb/embedded.c +++ b/drivers/ssb/embedded.c @@ -4,11 +4,13 @@ @@ -810,7 +1254,7 @@ #include #include #include -@@ -32,6 +34,39 @@ int ssb_watchdog_timer_set(struct ssb_bu +@@ -32,6 +34,38 @@ int ssb_watchdog_timer_set(struct ssb_bu } EXPORT_SYMBOL(ssb_watchdog_timer_set); @@ -837,9 +1281,8 @@ + bus->busnumber, &wdt, + sizeof(wdt)); + if (IS_ERR(pdev)) { -+ ssb_dprintk(KERN_INFO PFX -+ "can not register watchdog device, err: %li\n", -+ PTR_ERR(pdev)); ++ ssb_dbg("can not register watchdog device, err: %li\n", ++ PTR_ERR(pdev)); + return PTR_ERR(pdev); + } + @@ -860,7 +1303,18 @@ #include #include #include -@@ -433,6 +434,11 @@ static void ssb_devices_unregister(struc +@@ -274,8 +275,8 @@ int ssb_devices_thaw(struct ssb_freeze_c + + err = sdrv->probe(sdev, &sdev->id); + if (err) { +- ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n", +- dev_name(sdev->dev)); ++ ssb_err("Failed to thaw device %s\n", ++ dev_name(sdev->dev)); + result = err; + } + ssb_device_put(sdev); +@@ -433,10 +434,23 @@ static void ssb_devices_unregister(struc if (sdev->dev) device_unregister(sdev->dev); } @@ -872,7 +1326,63 @@ } void ssb_bus_unregister(struct ssb_bus *bus) -@@ -561,6 +567,8 @@ static int __devinit ssb_attach_queued_b + { ++ int err; ++ ++ err = ssb_gpio_unregister(bus); ++ if (err == -EBUSY) ++ ssb_dbg("Some GPIOs are still in use\n"); ++ else if (err) ++ ssb_dbg("Can not unregister GPIO driver: %i\n", err); ++ + ssb_buses_lock(); + ssb_devices_unregister(bus); + list_del(&bus->list); +@@ -482,8 +496,7 @@ static int ssb_devices_register(struct s + + devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL); + if (!devwrap) { +- ssb_printk(KERN_ERR PFX +- "Could not allocate device\n"); ++ ssb_err("Could not allocate device\n"); + err = -ENOMEM; + goto error; + } +@@ -522,9 +535,7 @@ static int ssb_devices_register(struct s + sdev->dev = dev; + err = device_register(dev); + if (err) { +- ssb_printk(KERN_ERR PFX +- "Could not register %s\n", +- dev_name(dev)); ++ ssb_err("Could not register %s\n", dev_name(dev)); + /* Set dev to NULL to not unregister + * dev on error unwinding. */ + sdev->dev = NULL; +@@ -534,6 +545,22 @@ static int ssb_devices_register(struct s + dev_idx++; + } + ++#ifdef CONFIG_SSB_DRIVER_MIPS ++ if (bus->mipscore.pflash.present) { ++ err = platform_device_register(&ssb_pflash_dev); ++ if (err) ++ pr_err("Error registering parallel flash\n"); ++ } ++#endif ++ ++#ifdef CONFIG_SSB_SFLASH ++ if (bus->mipscore.sflash.present) { ++ err = platform_device_register(&ssb_sflash_dev); ++ if (err) ++ pr_err("Error registering serial flash\n"); ++ } ++#endif ++ + return 0; + error: + /* Unwind the already registered devices. */ +@@ -561,6 +588,8 @@ static int __devinit ssb_attach_queued_b if (err) goto error; ssb_pcicore_init(&bus->pcicore); @@ -881,7 +1391,7 @@ ssb_bus_may_powerdown(bus); err = ssb_devices_register(bus); -@@ -796,7 +804,14 @@ static int __devinit ssb_bus_register(st +@@ -796,7 +825,13 @@ static int __devinit ssb_bus_register(st if (err) goto err_pcmcia_exit; ssb_chipcommon_init(&bus->chipco); @@ -889,14 +1399,62 @@ ssb_mipscore_init(&bus->mipscore); + err = ssb_gpio_init(bus); + if (err == -ENOTSUPP) -+ ssb_dprintk(KERN_DEBUG PFX "GPIO driver not activated\n"); ++ ssb_dbg("GPIO driver not activated\n"); + else if (err) -+ ssb_dprintk(KERN_ERR PFX -+ "Error registering GPIO driver: %i\n", err); ++ ssb_dbg("Error registering GPIO driver: %i\n", err); err = ssb_fetch_invariants(bus, get_invariants); if (err) { ssb_bus_may_powerdown(bus); -@@ -1118,8 +1133,7 @@ static u32 ssb_tmslow_reject_bitmask(str +@@ -847,11 +882,11 @@ int __devinit ssb_bus_pcibus_register(st + + err = ssb_bus_register(bus, ssb_pci_get_invariants, 0); + if (!err) { +- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " +- "PCI device %s\n", dev_name(&host_pci->dev)); ++ ssb_info("Sonics Silicon Backplane found on PCI device %s\n", ++ dev_name(&host_pci->dev)); + } else { +- ssb_printk(KERN_ERR PFX "Failed to register PCI version" +- " of SSB with error %d\n", err); ++ ssb_err("Failed to register PCI version of SSB with error %d\n", ++ err); + } + + return err; +@@ -872,8 +907,8 @@ int __devinit ssb_bus_pcmciabus_register + + err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr); + if (!err) { +- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " +- "PCMCIA device %s\n", pcmcia_dev->devname); ++ ssb_info("Sonics Silicon Backplane found on PCMCIA device %s\n", ++ pcmcia_dev->devname); + } + + return err; +@@ -895,8 +930,8 @@ int __devinit ssb_bus_sdiobus_register(s + + err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0); + if (!err) { +- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " +- "SDIO device %s\n", sdio_func_id(func)); ++ ssb_info("Sonics Silicon Backplane found on SDIO device %s\n", ++ sdio_func_id(func)); + } + + return err; +@@ -915,8 +950,8 @@ int __devinit ssb_bus_ssbbus_register(st + + err = ssb_bus_register(bus, get_invariants, baseaddr); + if (!err) { +- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at " +- "address 0x%08lX\n", baseaddr); ++ ssb_info("Sonics Silicon Backplane found at address 0x%08lX\n", ++ baseaddr); + } + + return err; +@@ -1118,8 +1153,7 @@ static u32 ssb_tmslow_reject_bitmask(str case SSB_IDLOW_SSBREV_27: /* same here */ return SSB_TMSLOW_REJECT; /* this is a guess */ default: @@ -906,9 +1464,589 @@ } return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23); } +@@ -1311,7 +1345,7 @@ out: + #endif + return err; + error: +- ssb_printk(KERN_ERR PFX "Bus powerdown failed\n"); ++ ssb_err("Bus powerdown failed\n"); + goto out; + } + EXPORT_SYMBOL(ssb_bus_may_powerdown); +@@ -1334,7 +1368,7 @@ int ssb_bus_powerup(struct ssb_bus *bus, + + return 0; + error: +- ssb_printk(KERN_ERR PFX "Bus powerup failed\n"); ++ ssb_err("Bus powerup failed\n"); + return err; + } + EXPORT_SYMBOL(ssb_bus_powerup); +@@ -1442,15 +1476,13 @@ static int __init ssb_modinit(void) + + err = b43_pci_ssb_bridge_init(); + if (err) { +- ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge " +- "initialization failed\n"); ++ ssb_err("Broadcom 43xx PCI-SSB-bridge initialization failed\n"); + /* don't fail SSB init because of this */ + err = 0; + } + err = ssb_gige_init(); + if (err) { +- ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet " +- "driver initialization failed\n"); ++ ssb_err("SSB Broadcom Gigabit Ethernet driver initialization failed\n"); + /* don't fail SSB init because of this */ + err = 0; + } +--- a/drivers/ssb/pci.c ++++ b/drivers/ssb/pci.c +@@ -56,7 +56,7 @@ int ssb_pci_switch_coreidx(struct ssb_bu + } + return 0; + error: +- ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx); ++ ssb_err("Failed to switch to core %u\n", coreidx); + return -ENODEV; + } + +@@ -67,10 +67,9 @@ int ssb_pci_switch_core(struct ssb_bus * + unsigned long flags; + + #if SSB_VERBOSE_PCICORESWITCH_DEBUG +- ssb_printk(KERN_INFO PFX +- "Switching to %s core, index %d\n", +- ssb_core_name(dev->id.coreid), +- dev->core_index); ++ ssb_info("Switching to %s core, index %d\n", ++ ssb_core_name(dev->id.coreid), ++ dev->core_index); + #endif + + spin_lock_irqsave(&bus->bar_lock, flags); +@@ -231,6 +230,15 @@ static inline u8 ssb_crc8(u8 crc, u8 dat + return t[crc ^ data]; + } + ++static void sprom_get_mac(char *mac, const u16 *in) ++{ ++ int i; ++ for (i = 0; i < 3; i++) { ++ *mac++ = in[i] >> 8; ++ *mac++ = in[i]; ++ } ++} ++ + static u8 ssb_sprom_crc(const u16 *sprom, u16 size) + { + int word; +@@ -278,7 +286,7 @@ static int sprom_do_write(struct ssb_bus + u32 spromctl; + u16 size = bus->sprom_size; + +- ssb_printk(KERN_NOTICE PFX "Writing SPROM. Do NOT turn off the power! Please stand by...\n"); ++ ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n"); + err = pci_read_config_dword(pdev, SSB_SPROMCTL, &spromctl); + if (err) + goto err_ctlreg; +@@ -286,17 +294,17 @@ static int sprom_do_write(struct ssb_bus + err = pci_write_config_dword(pdev, SSB_SPROMCTL, spromctl); + if (err) + goto err_ctlreg; +- ssb_printk(KERN_NOTICE PFX "[ 0%%"); ++ ssb_notice("[ 0%%"); + msleep(500); + for (i = 0; i < size; i++) { + if (i == size / 4) +- ssb_printk("25%%"); ++ ssb_cont("25%%"); + else if (i == size / 2) +- ssb_printk("50%%"); ++ ssb_cont("50%%"); + else if (i == (size * 3) / 4) +- ssb_printk("75%%"); ++ ssb_cont("75%%"); + else if (i % 2) +- ssb_printk("."); ++ ssb_cont("."); + writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2)); + mmiowb(); + msleep(20); +@@ -309,12 +317,12 @@ static int sprom_do_write(struct ssb_bus + if (err) + goto err_ctlreg; + msleep(500); +- ssb_printk("100%% ]\n"); +- ssb_printk(KERN_NOTICE PFX "SPROM written.\n"); ++ ssb_cont("100%% ]\n"); ++ ssb_notice("SPROM written\n"); + + return 0; + err_ctlreg: +- ssb_printk(KERN_ERR PFX "Could not access SPROM control register.\n"); ++ ssb_err("Could not access SPROM control register.\n"); + return err; + } + +@@ -339,10 +347,23 @@ static s8 r123_extract_antgain(u8 sprom_ + return (s8)gain; + } + ++static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in) ++{ ++ SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0); ++ SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0); ++ SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0); ++ SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0); ++ SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0); ++ SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0); ++ SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0); ++ SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0); ++ SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0); ++ SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO, ++ SSB_SPROM2_MAXP_A_LO_SHIFT); ++} ++ + static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in) + { +- int i; +- u16 v; + u16 loc[3]; + + if (out->revision == 3) /* rev 3 moved MAC */ +@@ -352,19 +373,10 @@ static void sprom_extract_r123(struct ss + loc[1] = SSB_SPROM1_ET0MAC; + loc[2] = SSB_SPROM1_ET1MAC; + } +- for (i = 0; i < 3; i++) { +- v = in[SPOFF(loc[0]) + i]; +- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v); +- } ++ sprom_get_mac(out->il0mac, &in[SPOFF(loc[0])]); + if (out->revision < 3) { /* only rev 1-2 have et0, et1 */ +- for (i = 0; i < 3; i++) { +- v = in[SPOFF(loc[1]) + i]; +- *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v); +- } +- for (i = 0; i < 3; i++) { +- v = in[SPOFF(loc[2]) + i]; +- *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v); +- } ++ sprom_get_mac(out->et0mac, &in[SPOFF(loc[1])]); ++ sprom_get_mac(out->et1mac, &in[SPOFF(loc[2])]); + } + SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0); + SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A, +@@ -372,6 +384,7 @@ static void sprom_extract_r123(struct ss + SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14); + SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15); + SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0); ++ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0); + if (out->revision == 1) + SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE, + SSB_SPROM1_BINF_CCODE_SHIFT); +@@ -398,8 +411,7 @@ static void sprom_extract_r123(struct ss + SSB_SPROM1_ITSSI_A_SHIFT); + SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0); + SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0); +- if (out->revision >= 2) +- SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0); ++ + SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8); + SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0); + +@@ -410,6 +422,8 @@ static void sprom_extract_r123(struct ss + out->antenna_gain.a1 = r123_extract_antgain(out->revision, in, + SSB_SPROM1_AGAIN_A, + SSB_SPROM1_AGAIN_A_SHIFT); ++ if (out->revision >= 2) ++ sprom_extract_r23(out, in); + } + + /* Revs 4 5 and 8 have partially shared layout */ +@@ -454,23 +468,20 @@ static void sprom_extract_r458(struct ss + + static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in) + { +- int i; +- u16 v; + u16 il0mac_offset; + + if (out->revision == 4) + il0mac_offset = SSB_SPROM4_IL0MAC; + else + il0mac_offset = SSB_SPROM5_IL0MAC; +- /* extract the MAC address */ +- for (i = 0; i < 3; i++) { +- v = in[SPOFF(il0mac_offset) + i]; +- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v); +- } ++ ++ sprom_get_mac(out->il0mac, &in[SPOFF(il0mac_offset)]); ++ + SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0); + SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A, + SSB_SPROM4_ETHPHY_ET1A_SHIFT); + SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0); ++ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0); + if (out->revision == 4) { + SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8); + SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0); +@@ -530,7 +541,7 @@ static void sprom_extract_r45(struct ssb + static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) + { + int i; +- u16 v, o; ++ u16 o; + u16 pwr_info_offset[] = { + SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, + SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 +@@ -539,11 +550,10 @@ static void sprom_extract_r8(struct ssb_ + ARRAY_SIZE(out->core_pwr_info)); + + /* extract the MAC address */ +- for (i = 0; i < 3; i++) { +- v = in[SPOFF(SSB_SPROM8_IL0MAC) + i]; +- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v); +- } ++ sprom_get_mac(out->il0mac, &in[SPOFF(SSB_SPROM8_IL0MAC)]); ++ + SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0); ++ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0); + SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8); + SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0); + SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0); +@@ -743,7 +753,7 @@ static int sprom_extract(struct ssb_bus + memset(out, 0, sizeof(*out)); + + out->revision = in[size - 1] & 0x00FF; +- ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision); ++ ssb_dbg("SPROM revision %d detected\n", out->revision); + memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */ + memset(out->et1mac, 0xFF, 6); + +@@ -752,7 +762,7 @@ static int sprom_extract(struct ssb_bus + * number stored in the SPROM. + * Always extract r1. */ + out->revision = 1; +- ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision); ++ ssb_dbg("SPROM treated as revision %d\n", out->revision); + } + + switch (out->revision) { +@@ -769,9 +779,8 @@ static int sprom_extract(struct ssb_bus + sprom_extract_r8(out, in); + break; + default: +- ssb_printk(KERN_WARNING PFX "Unsupported SPROM" +- " revision %d detected. Will extract" +- " v1\n", out->revision); ++ ssb_warn("Unsupported SPROM revision %d detected. Will extract v1\n", ++ out->revision); + out->revision = 1; + sprom_extract_r123(out, in); + } +@@ -791,7 +800,7 @@ static int ssb_pci_sprom_get(struct ssb_ + u16 *buf; + + if (!ssb_is_sprom_available(bus)) { +- ssb_printk(KERN_ERR PFX "No SPROM available!\n"); ++ ssb_err("No SPROM available!\n"); + return -ENODEV; + } + if (bus->chipco.dev) { /* can be unavailable! */ +@@ -810,7 +819,7 @@ static int ssb_pci_sprom_get(struct ssb_ + } else { + bus->sprom_offset = SSB_SPROM_BASE1; + } +- ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset); ++ ssb_dbg("SPROM offset is 0x%x\n", bus->sprom_offset); + + buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL); + if (!buf) +@@ -835,18 +844,15 @@ static int ssb_pci_sprom_get(struct ssb_ + * available for this device in some other storage */ + err = ssb_fill_sprom_with_fallback(bus, sprom); + if (err) { +- ssb_printk(KERN_WARNING PFX "WARNING: Using" +- " fallback SPROM failed (err %d)\n", +- err); ++ ssb_warn("WARNING: Using fallback SPROM failed (err %d)\n", ++ err); + } else { +- ssb_dprintk(KERN_DEBUG PFX "Using SPROM" +- " revision %d provided by" +- " platform.\n", sprom->revision); ++ ssb_dbg("Using SPROM revision %d provided by platform\n", ++ sprom->revision); + err = 0; + goto out_free; + } +- ssb_printk(KERN_WARNING PFX "WARNING: Invalid" +- " SPROM CRC (corrupt SPROM)\n"); ++ ssb_warn("WARNING: Invalid SPROM CRC (corrupt SPROM)\n"); + } + } + err = sprom_extract(bus, sprom, buf, bus->sprom_size); +--- a/drivers/ssb/pcihost_wrapper.c ++++ b/drivers/ssb/pcihost_wrapper.c +@@ -38,7 +38,7 @@ static int ssb_pcihost_resume(struct pci + struct ssb_bus *ssb = pci_get_drvdata(dev); + int err; + +- pci_set_power_state(dev, 0); ++ pci_set_power_state(dev, PCI_D0); + err = pci_enable_device(dev); + if (err) + return err; +--- a/drivers/ssb/pcmcia.c ++++ b/drivers/ssb/pcmcia.c +@@ -143,7 +143,7 @@ int ssb_pcmcia_switch_coreidx(struct ssb + + return 0; + error: +- ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx); ++ ssb_err("Failed to switch to core %u\n", coreidx); + return err; + } + +@@ -153,10 +153,9 @@ int ssb_pcmcia_switch_core(struct ssb_bu + int err; + + #if SSB_VERBOSE_PCMCIACORESWITCH_DEBUG +- ssb_printk(KERN_INFO PFX +- "Switching to %s core, index %d\n", +- ssb_core_name(dev->id.coreid), +- dev->core_index); ++ ssb_info("Switching to %s core, index %d\n", ++ ssb_core_name(dev->id.coreid), ++ dev->core_index); + #endif + + err = ssb_pcmcia_switch_coreidx(bus, dev->core_index); +@@ -192,7 +191,7 @@ int ssb_pcmcia_switch_segment(struct ssb + + return 0; + error: +- ssb_printk(KERN_ERR PFX "Failed to switch pcmcia segment\n"); ++ ssb_err("Failed to switch pcmcia segment\n"); + return err; + } + +@@ -549,44 +548,39 @@ static int ssb_pcmcia_sprom_write_all(st + bool failed = 0; + size_t size = SSB_PCMCIA_SPROM_SIZE; + +- ssb_printk(KERN_NOTICE PFX +- "Writing SPROM. Do NOT turn off the power! " +- "Please stand by...\n"); ++ ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n"); + err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEEN); + if (err) { +- ssb_printk(KERN_NOTICE PFX +- "Could not enable SPROM write access.\n"); ++ ssb_notice("Could not enable SPROM write access\n"); + return -EBUSY; + } +- ssb_printk(KERN_NOTICE PFX "[ 0%%"); ++ ssb_notice("[ 0%%"); + msleep(500); + for (i = 0; i < size; i++) { + if (i == size / 4) +- ssb_printk("25%%"); ++ ssb_cont("25%%"); + else if (i == size / 2) +- ssb_printk("50%%"); ++ ssb_cont("50%%"); + else if (i == (size * 3) / 4) +- ssb_printk("75%%"); ++ ssb_cont("75%%"); + else if (i % 2) +- ssb_printk("."); ++ ssb_cont("."); + err = ssb_pcmcia_sprom_write(bus, i, sprom[i]); + if (err) { +- ssb_printk(KERN_NOTICE PFX +- "Failed to write to SPROM.\n"); ++ ssb_notice("Failed to write to SPROM\n"); + failed = 1; + break; + } + } + err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS); + if (err) { +- ssb_printk(KERN_NOTICE PFX +- "Could not disable SPROM write access.\n"); ++ ssb_notice("Could not disable SPROM write access\n"); + failed = 1; + } + msleep(500); + if (!failed) { +- ssb_printk("100%% ]\n"); +- ssb_printk(KERN_NOTICE PFX "SPROM written.\n"); ++ ssb_cont("100%% ]\n"); ++ ssb_notice("SPROM written\n"); + } + + return failed ? -EBUSY : 0; +@@ -700,7 +694,7 @@ static int ssb_pcmcia_do_get_invariants( + return -ENOSPC; /* continue with next entry */ + + error: +- ssb_printk(KERN_ERR PFX ++ ssb_err( + "PCMCIA: Failed to fetch device invariants: %s\n", + error_description); + return -ENODEV; +@@ -722,7 +716,7 @@ int ssb_pcmcia_get_invariants(struct ssb + res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE, + ssb_pcmcia_get_mac, sprom); + if (res != 0) { +- ssb_printk(KERN_ERR PFX ++ ssb_err( + "PCMCIA: Failed to fetch MAC address\n"); + return -ENODEV; + } +@@ -733,7 +727,7 @@ int ssb_pcmcia_get_invariants(struct ssb + if ((res == 0) || (res == -ENOSPC)) + return 0; + +- ssb_printk(KERN_ERR PFX ++ ssb_err( + "PCMCIA: Failed to fetch device invariants\n"); + return -ENODEV; + } +@@ -843,6 +837,6 @@ int ssb_pcmcia_init(struct ssb_bus *bus) + + return 0; + error: +- ssb_printk(KERN_ERR PFX "Failed to initialize PCMCIA host device\n"); ++ ssb_err("Failed to initialize PCMCIA host device\n"); + return err; + } +--- a/drivers/ssb/scan.c ++++ b/drivers/ssb/scan.c +@@ -125,8 +125,7 @@ static u16 pcidev_to_chipid(struct pci_d + chipid_fallback = 0x4401; + break; + default: +- ssb_printk(KERN_ERR PFX +- "PCI-ID not in fallback list\n"); ++ ssb_err("PCI-ID not in fallback list\n"); + } + + return chipid_fallback; +@@ -152,8 +151,7 @@ static u8 chipid_to_nrcores(u16 chipid) + case 0x4704: + return 9; + default: +- ssb_printk(KERN_ERR PFX +- "CHIPID not in nrcores fallback list\n"); ++ ssb_err("CHIPID not in nrcores fallback list\n"); + } + + return 1; +@@ -320,15 +318,13 @@ int ssb_bus_scan(struct ssb_bus *bus, + bus->chip_package = 0; + } + } +- ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and " +- "package 0x%02X\n", bus->chip_id, bus->chip_rev, +- bus->chip_package); ++ ssb_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n", ++ bus->chip_id, bus->chip_rev, bus->chip_package); + if (!bus->nr_devices) + bus->nr_devices = chipid_to_nrcores(bus->chip_id); + if (bus->nr_devices > ARRAY_SIZE(bus->devices)) { +- ssb_printk(KERN_ERR PFX +- "More than %d ssb cores found (%d)\n", +- SSB_MAX_NR_CORES, bus->nr_devices); ++ ssb_err("More than %d ssb cores found (%d)\n", ++ SSB_MAX_NR_CORES, bus->nr_devices); + goto err_unmap; + } + if (bus->bustype == SSB_BUSTYPE_SSB) { +@@ -370,8 +366,7 @@ int ssb_bus_scan(struct ssb_bus *bus, + nr_80211_cores++; + if (nr_80211_cores > 1) { + if (!we_support_multiple_80211_cores(bus)) { +- ssb_dprintk(KERN_INFO PFX "Ignoring additional " +- "802.11 core\n"); ++ ssb_dbg("Ignoring additional 802.11 core\n"); + continue; + } + } +@@ -379,8 +374,7 @@ int ssb_bus_scan(struct ssb_bus *bus, + case SSB_DEV_EXTIF: + #ifdef CONFIG_SSB_DRIVER_EXTIF + if (bus->extif.dev) { +- ssb_printk(KERN_WARNING PFX +- "WARNING: Multiple EXTIFs found\n"); ++ ssb_warn("WARNING: Multiple EXTIFs found\n"); + break; + } + bus->extif.dev = dev; +@@ -388,8 +382,7 @@ int ssb_bus_scan(struct ssb_bus *bus, + break; + case SSB_DEV_CHIPCOMMON: + if (bus->chipco.dev) { +- ssb_printk(KERN_WARNING PFX +- "WARNING: Multiple ChipCommon found\n"); ++ ssb_warn("WARNING: Multiple ChipCommon found\n"); + break; + } + bus->chipco.dev = dev; +@@ -398,8 +391,7 @@ int ssb_bus_scan(struct ssb_bus *bus, + case SSB_DEV_MIPS_3302: + #ifdef CONFIG_SSB_DRIVER_MIPS + if (bus->mipscore.dev) { +- ssb_printk(KERN_WARNING PFX +- "WARNING: Multiple MIPS cores found\n"); ++ ssb_warn("WARNING: Multiple MIPS cores found\n"); + break; + } + bus->mipscore.dev = dev; +@@ -420,8 +412,7 @@ int ssb_bus_scan(struct ssb_bus *bus, + } + } + if (bus->pcicore.dev) { +- ssb_printk(KERN_WARNING PFX +- "WARNING: Multiple PCI(E) cores found\n"); ++ ssb_warn("WARNING: Multiple PCI(E) cores found\n"); + break; + } + bus->pcicore.dev = dev; +--- a/drivers/ssb/sprom.c ++++ b/drivers/ssb/sprom.c +@@ -54,7 +54,7 @@ static int hex2sprom(u16 *sprom, const c + while (cnt < sprom_size_words) { + memcpy(tmp, dump, 4); + dump += 4; +- err = strict_strtoul(tmp, 16, &parsed); ++ err = kstrtoul(tmp, 16, &parsed); + if (err) + return err; + sprom[cnt++] = swab16((u16)parsed); +@@ -127,13 +127,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_ + goto out_kfree; + err = ssb_devices_freeze(bus, &freeze); + if (err) { +- ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n"); ++ ssb_err("SPROM write: Could not freeze all devices\n"); + goto out_unlock; + } + res = sprom_write(bus, sprom); + err = ssb_devices_thaw(&freeze); + if (err) +- ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n"); ++ ssb_err("SPROM write: Could not thaw all devices\n"); + out_unlock: + mutex_unlock(&bus->sprom_mutex); + out_kfree: --- a/drivers/ssb/ssb_private.h +++ b/drivers/ssb/ssb_private.h -@@ -3,6 +3,7 @@ +@@ -3,21 +3,33 @@ #include #include @@ -916,7 +2054,37 @@ #define PFX "ssb: " -@@ -210,5 +211,63 @@ static inline void b43_pci_ssb_bridge_ex + + #ifdef CONFIG_SSB_SILENT +-# define ssb_printk(fmt, x...) do { /* nothing */ } while (0) ++# define ssb_printk(fmt, ...) \ ++ do { if (0) printk(fmt, ##__VA_ARGS__); } while (0) + #else +-# define ssb_printk printk ++# define ssb_printk(fmt, ...) \ ++ printk(fmt, ##__VA_ARGS__) + #endif /* CONFIG_SSB_SILENT */ + ++#define ssb_emerg(fmt, ...) ssb_printk(KERN_EMERG PFX fmt, ##__VA_ARGS__) ++#define ssb_err(fmt, ...) ssb_printk(KERN_ERR PFX fmt, ##__VA_ARGS__) ++#define ssb_warn(fmt, ...) ssb_printk(KERN_WARNING PFX fmt, ##__VA_ARGS__) ++#define ssb_notice(fmt, ...) ssb_printk(KERN_NOTICE PFX fmt, ##__VA_ARGS__) ++#define ssb_info(fmt, ...) ssb_printk(KERN_INFO PFX fmt, ##__VA_ARGS__) ++#define ssb_cont(fmt, ...) ssb_printk(KERN_CONT fmt, ##__VA_ARGS__) ++ + /* dprintk: Debugging printk; vanishes for non-debug compilation */ + #ifdef CONFIG_SSB_DEBUG +-# define ssb_dprintk(fmt, x...) ssb_printk(fmt , ##x) ++# define ssb_dbg(fmt, ...) \ ++ ssb_printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__) + #else +-# define ssb_dprintk(fmt, x...) do { /* nothing */ } while (0) ++# define ssb_dbg(fmt, ...) \ ++ do { if (0) printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__); } while (0) + #endif + + #ifdef CONFIG_SSB_DEBUG +@@ -210,5 +222,76 @@ static inline void b43_pci_ssb_bridge_ex /* driver_chipcommon_pmu.c */ extern u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc); extern u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc); @@ -937,6 +2105,14 @@ +} +#endif /* CONFIG_SSB_SFLASH */ + ++#ifdef CONFIG_SSB_DRIVER_MIPS ++extern struct platform_device ssb_pflash_dev; ++#endif ++ ++#ifdef CONFIG_SSB_SFLASH ++extern struct platform_device ssb_sflash_dev; ++#endif ++ +#ifdef CONFIG_SSB_DRIVER_EXTIF +extern u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks); +extern u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms); @@ -972,11 +2148,16 @@ + +#ifdef CONFIG_SSB_DRIVER_GPIO +extern int ssb_gpio_init(struct ssb_bus *bus); ++extern int ssb_gpio_unregister(struct ssb_bus *bus); +#else /* CONFIG_SSB_DRIVER_GPIO */ +static inline int ssb_gpio_init(struct ssb_bus *bus) +{ + return -ENOTSUPP; +} ++static inline int ssb_gpio_unregister(struct ssb_bus *bus) ++{ ++ return 0; ++} +#endif /* CONFIG_SSB_DRIVER_GPIO */ #endif /* LINUX_SSB_PRIVATE_H_ */ @@ -993,7 +2174,85 @@ #include -@@ -432,7 +434,11 @@ struct ssb_bus { +@@ -24,9 +26,9 @@ struct ssb_sprom_core_pwr_info { + + struct ssb_sprom { + u8 revision; +- u8 il0mac[6]; /* MAC address for 802.11b/g */ +- u8 et0mac[6]; /* MAC address for Ethernet */ +- u8 et1mac[6]; /* MAC address for 802.11a */ ++ u8 il0mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11b/g */ ++ u8 et0mac[6] __aligned(sizeof(u16)); /* MAC address for Ethernet */ ++ u8 et1mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11a */ + u8 et0phyaddr; /* MII address for enet0 */ + u8 et1phyaddr; /* MII address for enet1 */ + u8 et0mdcport; /* MDIO for enet0 */ +@@ -338,13 +340,61 @@ enum ssb_bustype { + #define SSB_BOARDVENDOR_DELL 0x1028 /* Dell */ + #define SSB_BOARDVENDOR_HP 0x0E11 /* HP */ + /* board_type */ ++#define SSB_BOARD_BCM94301CB 0x0406 ++#define SSB_BOARD_BCM94301MP 0x0407 ++#define SSB_BOARD_BU4309 0x040A ++#define SSB_BOARD_BCM94309CB 0x040B ++#define SSB_BOARD_BCM4309MP 0x040C ++#define SSB_BOARD_BU4306 0x0416 + #define SSB_BOARD_BCM94306MP 0x0418 + #define SSB_BOARD_BCM4309G 0x0421 + #define SSB_BOARD_BCM4306CB 0x0417 +-#define SSB_BOARD_BCM4309MP 0x040C ++#define SSB_BOARD_BCM94306PC 0x0425 /* pcmcia 3.3v 4306 card */ ++#define SSB_BOARD_BCM94306CBSG 0x042B /* with SiGe PA */ ++#define SSB_BOARD_PCSG94306 0x042D /* with SiGe PA */ ++#define SSB_BOARD_BU4704SD 0x042E /* with sdram */ ++#define SSB_BOARD_BCM94704AGR 0x042F /* dual 11a/11g Router */ ++#define SSB_BOARD_BCM94308MP 0x0430 /* 11a-only minipci */ ++#define SSB_BOARD_BU4318 0x0447 ++#define SSB_BOARD_CB4318 0x0448 ++#define SSB_BOARD_MPG4318 0x0449 + #define SSB_BOARD_MP4318 0x044A +-#define SSB_BOARD_BU4306 0x0416 +-#define SSB_BOARD_BU4309 0x040A ++#define SSB_BOARD_SD4318 0x044B ++#define SSB_BOARD_BCM94306P 0x044C /* with SiGe */ ++#define SSB_BOARD_BCM94303MP 0x044E ++#define SSB_BOARD_BCM94306MPM 0x0450 ++#define SSB_BOARD_BCM94306MPL 0x0453 ++#define SSB_BOARD_PC4303 0x0454 /* pcmcia */ ++#define SSB_BOARD_BCM94306MPLNA 0x0457 ++#define SSB_BOARD_BCM94306MPH 0x045B ++#define SSB_BOARD_BCM94306PCIV 0x045C ++#define SSB_BOARD_BCM94318MPGH 0x0463 ++#define SSB_BOARD_BU4311 0x0464 ++#define SSB_BOARD_BCM94311MC 0x0465 ++#define SSB_BOARD_BCM94311MCAG 0x0466 ++/* 4321 boards */ ++#define SSB_BOARD_BU4321 0x046B ++#define SSB_BOARD_BU4321E 0x047C ++#define SSB_BOARD_MP4321 0x046C ++#define SSB_BOARD_CB2_4321 0x046D ++#define SSB_BOARD_CB2_4321_AG 0x0066 ++#define SSB_BOARD_MC4321 0x046E ++/* 4325 boards */ ++#define SSB_BOARD_BCM94325DEVBU 0x0490 ++#define SSB_BOARD_BCM94325BGABU 0x0491 ++#define SSB_BOARD_BCM94325SDGWB 0x0492 ++#define SSB_BOARD_BCM94325SDGMDL 0x04AA ++#define SSB_BOARD_BCM94325SDGMDL2 0x04C6 ++#define SSB_BOARD_BCM94325SDGMDL3 0x04C9 ++#define SSB_BOARD_BCM94325SDABGWBA 0x04E1 ++/* 4322 boards */ ++#define SSB_BOARD_BCM94322MC 0x04A4 ++#define SSB_BOARD_BCM94322USB 0x04A8 /* dualband */ ++#define SSB_BOARD_BCM94322HM 0x04B0 ++#define SSB_BOARD_BCM94322USB2D 0x04Bf /* single band discrete front end */ ++/* 4312 boards */ ++#define SSB_BOARD_BU4312 0x048A ++#define SSB_BOARD_BCM4312MCGSG 0x04B5 + /* chip_package */ + #define SSB_CHIPPACK_BCM4712S 1 /* Small 200pin 4712 */ + #define SSB_CHIPPACK_BCM4712M 2 /* Medium 225pin 4712 */ +@@ -432,7 +482,11 @@ struct ssb_bus { #ifdef CONFIG_SSB_EMBEDDED /* Lock for GPIO register access. */ spinlock_t gpio_lock; @@ -1147,9 +2406,51 @@ + #endif /* CONFIG_SSB_DRIVER_EXTIF */ #endif /* LINUX_SSB_EXTIFCORE_H_ */ +--- a/include/linux/ssb/ssb_driver_gige.h ++++ b/include/linux/ssb/ssb_driver_gige.h +@@ -97,21 +97,16 @@ static inline bool ssb_gige_must_flush_p + return 0; + } + +-#ifdef CONFIG_BCM47XX +-#include + /* Get the device MAC address */ +-static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr) +-{ +- char buf[20]; +- if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0) +- return; +- nvram_parse_macaddr(buf, macaddr); +-} +-#else +-static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr) ++static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr) + { ++ struct ssb_gige *dev = pdev_to_ssb_gige(pdev); ++ if (!dev) ++ return -ENODEV; ++ ++ memcpy(macaddr, dev->dev->bus->sprom.et0mac, 6); ++ return 0; + } +-#endif + + extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev, + struct pci_dev *pdev); +@@ -175,6 +170,10 @@ static inline bool ssb_gige_must_flush_p + { + return 0; + } ++static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr) ++{ ++ return -ENODEV; ++} + + #endif /* CONFIG_SSB_DRIVER_GIGE */ + #endif /* LINUX_SSB_DRIVER_GIGE_H_ */ --- a/include/linux/ssb/ssb_driver_mips.h +++ b/include/linux/ssb/ssb_driver_mips.h -@@ -13,6 +13,12 @@ struct ssb_serial_port { +@@ -13,6 +13,24 @@ struct ssb_serial_port { unsigned int reg_shift; }; @@ -1159,10 +2460,22 @@ + u32 window; + u32 window_size; +}; ++ ++#ifdef CONFIG_SSB_SFLASH ++struct ssb_sflash { ++ bool present; ++ u32 window; ++ u32 blocksize; ++ u16 numblocks; ++ u32 size; ++ ++ void *priv; ++}; ++#endif struct ssb_mipscore { struct ssb_device *dev; -@@ -20,9 +26,7 @@ struct ssb_mipscore { +@@ -20,9 +38,10 @@ struct ssb_mipscore { int nr_serial_ports; struct ssb_serial_port serial_ports[4]; @@ -1170,12 +2483,35 @@ - u32 flash_window; - u32 flash_window_size; + struct ssb_pflash pflash; ++#ifdef CONFIG_SSB_SFLASH ++ struct ssb_sflash sflash; ++#endif }; extern void ssb_mipscore_init(struct ssb_mipscore *mcore); +@@ -41,6 +60,11 @@ void ssb_mipscore_init(struct ssb_mipsco + { + } + ++static inline unsigned int ssb_mips_irq(struct ssb_device *dev) ++{ ++ return 0; ++} ++ + #endif /* CONFIG_SSB_DRIVER_MIPS */ + + #endif /* LINUX_SSB_MIPSCORE_H_ */ --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h -@@ -289,11 +289,11 @@ +@@ -172,6 +172,7 @@ + #define SSB_SPROMSIZE_WORDS_R4 220 + #define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16)) + #define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16)) ++#define SSB_SPROMSIZE_WORDS_R10 230 + #define SSB_SPROM_BASE1 0x1000 + #define SSB_SPROM_BASE31 0x0800 + #define SSB_SPROM_REVISION 0x007E +@@ -289,11 +290,11 @@ #define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5 #define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */ #define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */ @@ -1192,7 +2528,7 @@ #define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */ #define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */ #define SSB_SPROM4_AGAIN0_SHIFT 0 -@@ -485,7 +485,7 @@ +@@ -485,7 +486,7 @@ #define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT 4 #define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL 0x0020 #define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT 5 @@ -1235,46 +2571,3 @@ break; #endif } ---- a/drivers/ssb/pci.c -+++ b/drivers/ssb/pci.c -@@ -339,6 +339,21 @@ static s8 r123_extract_antgain(u8 sprom_ - return (s8)gain; - } - -+static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in) -+{ -+ SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0); -+ SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0); -+ SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0); -+ SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0); -+ SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0); -+ SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0); -+ SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0); -+ SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0); -+ SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0); -+ SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO, -+ SSB_SPROM2_MAXP_A_LO_SHIFT); -+} -+ - static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in) - { - int i; -@@ -398,8 +413,7 @@ static void sprom_extract_r123(struct ss - SSB_SPROM1_ITSSI_A_SHIFT); - SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0); - SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0); -- if (out->revision >= 2) -- SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0); -+ - SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8); - SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0); - -@@ -410,6 +424,8 @@ static void sprom_extract_r123(struct ss - out->antenna_gain.a1 = r123_extract_antgain(out->revision, in, - SSB_SPROM1_AGAIN_A, - SSB_SPROM1_AGAIN_A_SHIFT); -+ if (out->revision >= 2) -+ sprom_extract_r23(out, in); - } - - /* Revs 4 5 and 8 have partially shared layout */ diff --git a/target/linux/generic/patches-3.6/025-bcma_backport.patch b/target/linux/generic/patches-3.6/025-bcma_backport.patch index 15f54a7162..9ad3ce3f53 100644 --- a/target/linux/generic/patches-3.6/025-bcma_backport.patch +++ b/target/linux/generic/patches-3.6/025-bcma_backport.patch @@ -1,6 +1,25 @@ +--- a/arch/mips/bcm47xx/serial.c ++++ b/arch/mips/bcm47xx/serial.c +@@ -62,7 +62,7 @@ static int __init uart8250_init_bcma(voi + + p->mapbase = (unsigned int) bcma_port->regs; + p->membase = (void *) bcma_port->regs; +- p->irq = bcma_port->irq + 2; ++ p->irq = bcma_port->irq; + p->uartclk = bcma_port->baud_base; + p->regshift = bcma_port->reg_shift; + p->iotype = UPIO_MEM; --- a/drivers/bcma/Kconfig +++ b/drivers/bcma/Kconfig -@@ -48,12 +48,12 @@ config BCMA_DRIVER_MIPS +@@ -26,6 +26,7 @@ config BCMA_HOST_PCI_POSSIBLE + config BCMA_HOST_PCI + bool "Support for BCMA on PCI-host bus" + depends on BCMA_HOST_PCI_POSSIBLE ++ default y + + config BCMA_DRIVER_PCI_HOSTMODE + bool "Driver for PCI core working in hostmode" +@@ -48,12 +49,12 @@ config BCMA_DRIVER_MIPS config BCMA_SFLASH bool @@ -15,7 +34,7 @@ default y config BCMA_DRIVER_GMAC_CMN -@@ -65,6 +65,14 @@ config BCMA_DRIVER_GMAC_CMN +@@ -65,6 +66,14 @@ config BCMA_DRIVER_GMAC_CMN If unsure, say N @@ -42,7 +61,16 @@ obj-$(CONFIG_BCMA) += bcma.o --- a/drivers/bcma/bcma_private.h +++ b/drivers/bcma/bcma_private.h -@@ -31,6 +31,8 @@ int __init bcma_bus_early_register(struc +@@ -22,6 +22,8 @@ + struct bcma_bus; + + /* main.c */ ++bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value, ++ int timeout); + int __devinit bcma_bus_register(struct bcma_bus *bus); + void bcma_bus_unregister(struct bcma_bus *bus); + int __init bcma_bus_early_register(struct bcma_bus *bus, +@@ -31,6 +33,8 @@ int __init bcma_bus_early_register(struc int bcma_bus_suspend(struct bcma_bus *bus); int bcma_bus_resume(struct bcma_bus *bus); #endif @@ -51,7 +79,11 @@ /* scan.c */ int bcma_bus_scan(struct bcma_bus *bus); -@@ -48,12 +50,13 @@ void bcma_chipco_serial_init(struct bcma +@@ -45,15 +49,17 @@ int bcma_sprom_get(struct bcma_bus *bus) + /* driver_chipcommon.c */ + #ifdef CONFIG_BCMA_DRIVER_MIPS + void bcma_chipco_serial_init(struct bcma_drv_cc *cc); ++extern struct platform_device bcma_pflash_dev; #endif /* CONFIG_BCMA_DRIVER_MIPS */ /* driver_chipcommon_pmu.c */ @@ -67,7 +99,7 @@ #else static inline int bcma_sflash_init(struct bcma_drv_cc *cc) { -@@ -65,6 +68,7 @@ static inline int bcma_sflash_init(struc +@@ -65,6 +71,7 @@ static inline int bcma_sflash_init(struc #ifdef CONFIG_BCMA_NFLASH /* driver_chipcommon_nflash.c */ int bcma_nflash_init(struct bcma_drv_cc *cc); @@ -75,7 +107,7 @@ #else static inline int bcma_nflash_init(struct bcma_drv_cc *cc) { -@@ -82,9 +86,21 @@ extern void __exit bcma_host_pci_exit(vo +@@ -82,9 +89,26 @@ extern void __exit bcma_host_pci_exit(vo /* driver_pci.c */ u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address); @@ -89,17 +121,75 @@ +#ifdef CONFIG_BCMA_DRIVER_GPIO +/* driver_gpio.c */ +int bcma_gpio_init(struct bcma_drv_cc *cc); ++int bcma_gpio_unregister(struct bcma_drv_cc *cc); +#else +static inline int bcma_gpio_init(struct bcma_drv_cc *cc) +{ + return -ENOTSUPP; +} ++static inline int bcma_gpio_unregister(struct bcma_drv_cc *cc) ++{ ++ return 0; ++} +#endif /* CONFIG_BCMA_DRIVER_GPIO */ + #endif --- a/drivers/bcma/core.c +++ b/drivers/bcma/core.c -@@ -65,7 +65,7 @@ void bcma_core_set_clockmode(struct bcma +@@ -9,6 +9,25 @@ + #include + #include + ++static bool bcma_core_wait_value(struct bcma_device *core, u16 reg, u32 mask, ++ u32 value, int timeout) ++{ ++ unsigned long deadline = jiffies + timeout; ++ u32 val; ++ ++ do { ++ val = bcma_aread32(core, reg); ++ if ((val & mask) == value) ++ return true; ++ cpu_relax(); ++ udelay(10); ++ } while (!time_after_eq(jiffies, deadline)); ++ ++ bcma_warn(core->bus, "Timeout waiting for register 0x%04X!\n", reg); ++ ++ return false; ++} ++ + bool bcma_core_is_enabled(struct bcma_device *core) + { + if ((bcma_aread32(core, BCMA_IOCTL) & (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC)) +@@ -25,13 +44,15 @@ void bcma_core_disable(struct bcma_devic + if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET) + return; + +- bcma_awrite32(core, BCMA_IOCTL, flags); +- bcma_aread32(core, BCMA_IOCTL); +- udelay(10); ++ bcma_core_wait_value(core, BCMA_RESET_ST, ~0, 0, 300); + + bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET); + bcma_aread32(core, BCMA_RESET_CTL); + udelay(1); ++ ++ bcma_awrite32(core, BCMA_IOCTL, flags); ++ bcma_aread32(core, BCMA_IOCTL); ++ udelay(10); + } + EXPORT_SYMBOL_GPL(bcma_core_disable); + +@@ -43,6 +64,7 @@ int bcma_core_enable(struct bcma_device + bcma_aread32(core, BCMA_IOCTL); + + bcma_awrite32(core, BCMA_RESET_CTL, 0); ++ bcma_aread32(core, BCMA_RESET_CTL); + udelay(1); + + bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags)); +@@ -65,7 +87,7 @@ void bcma_core_set_clockmode(struct bcma switch (clkmode) { case BCMA_CLKMODE_FAST: bcma_set32(core, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT); @@ -108,6 +198,21 @@ for (i = 0; i < 1500; i++) { if (bcma_read32(core, BCMA_CLKCTLST) & BCMA_CLKCTLST_HAVEHT) { +@@ -104,7 +126,13 @@ void bcma_core_pll_ctl(struct bcma_devic + if (i) + bcma_err(core->bus, "PLL enable timeout\n"); + } else { +- bcma_warn(core->bus, "Disabling PLL not supported yet!\n"); ++ /* ++ * Mask the PLL but don't wait for it to be disabled. PLL may be ++ * shared between cores and will be still up if there is another ++ * core using it. ++ */ ++ bcma_mask32(core, BCMA_CLKCTLST, ~req); ++ bcma_read32(core, BCMA_CLKCTLST); + } + } + EXPORT_SYMBOL_GPL(bcma_core_pll_ctl); --- a/drivers/bcma/driver_chipcommon.c +++ b/drivers/bcma/driver_chipcommon.c @@ -4,12 +4,15 @@ @@ -126,7 +231,7 @@ #include static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset, -@@ -22,20 +25,120 @@ static inline u32 bcma_cc_write32_masked +@@ -22,23 +25,130 @@ static inline u32 bcma_cc_write32_masked return value; } @@ -249,9 +354,21 @@ + bcma_core_chipcommon_early_init(cc); + if (cc->core->id.rev >= 20) { - bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0); - bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0); -@@ -56,15 +159,33 @@ void bcma_core_chipcommon_init(struct bc +- bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0); +- bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0); ++ u32 pullup = 0, pulldown = 0; ++ ++ if (cc->core->bus->chipinfo.id == BCMA_CHIP_ID_BCM43142) { ++ pullup = 0x402e0; ++ pulldown = 0x20500; ++ } ++ ++ bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, pullup); ++ bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, pulldown); + } + + if (cc->capabilities & BCMA_CC_CAP_PMU) +@@ -56,15 +166,33 @@ void bcma_core_chipcommon_init(struct bc ((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) | (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT))); } @@ -288,7 +405,7 @@ } void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value) -@@ -84,28 +205,99 @@ u32 bcma_chipco_gpio_in(struct bcma_drv_ +@@ -84,28 +212,99 @@ u32 bcma_chipco_gpio_in(struct bcma_drv_ u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value) { @@ -393,7 +510,7 @@ } #ifdef CONFIG_BCMA_DRIVER_MIPS -@@ -118,8 +310,7 @@ void bcma_chipco_serial_init(struct bcma +@@ -118,8 +317,7 @@ void bcma_chipco_serial_init(struct bcma struct bcma_serial_port *ports = cc->serial_ports; if (ccrev >= 11 && ccrev != 15) { @@ -403,24 +520,34 @@ if (ccrev >= 21) { /* Turn off UART clock before switching clocksource. */ bcma_cc_write32(cc, BCMA_CC_CORECTL, +@@ -141,7 +339,7 @@ void bcma_chipco_serial_init(struct bcma + return; + } + +- irq = bcma_core_mips_irq(cc->core); ++ irq = bcma_core_irq(cc->core); + + /* Determine the registers of the UARTs */ + cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART); --- a/drivers/bcma/driver_chipcommon_nflash.c +++ b/drivers/bcma/driver_chipcommon_nflash.c @@ -5,15 +5,40 @@ * Licensed under the GNU/GPL. See COPYING for details. */ ++#include "bcma_private.h" ++ +#include #include -#include -#include - #include "bcma_private.h" - +-#include "bcma_private.h" +struct platform_device bcma_nflash_dev = { + .name = "bcma_nflash", + .num_resources = 0, +}; -+ + /* Initialize NAND flash access */ int bcma_nflash_init(struct bcma_drv_cc *cc) { @@ -428,7 +555,7 @@ + struct bcma_bus *bus = cc->core->bus; + + if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4706 && -+ cc->core->id.rev != 0x38) { ++ cc->core->id.rev != 38) { + bcma_err(bus, "NAND flash on unsupported board!\n"); + return -ENOTSUPP; + } @@ -466,7 +593,143 @@ void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value) { -@@ -76,7 +77,10 @@ static void bcma_pmu_resources_init(stru +@@ -55,6 +56,109 @@ void bcma_chipco_regctl_maskset(struct b + } + EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset); + ++static u32 bcma_pmu_xtalfreq(struct bcma_drv_cc *cc) ++{ ++ u32 ilp_ctl, alp_hz; ++ ++ if (!(bcma_cc_read32(cc, BCMA_CC_PMU_STAT) & ++ BCMA_CC_PMU_STAT_EXT_LPO_AVAIL)) ++ return 0; ++ ++ bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ, ++ BIT(BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT)); ++ usleep_range(1000, 2000); ++ ++ ilp_ctl = bcma_cc_read32(cc, BCMA_CC_PMU_XTAL_FREQ); ++ ilp_ctl &= BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK; ++ ++ bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ, 0); ++ ++ alp_hz = ilp_ctl * 32768 / 4; ++ return (alp_hz + 50000) / 100000 * 100; ++} ++ ++static void bcma_pmu2_pll_init0(struct bcma_drv_cc *cc, u32 xtalfreq) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ u32 freq_tgt_target = 0, freq_tgt_current; ++ u32 pll0, mask; ++ ++ switch (bus->chipinfo.id) { ++ case BCMA_CHIP_ID_BCM43142: ++ /* pmu2_xtaltab0_adfll_485 */ ++ switch (xtalfreq) { ++ case 12000: ++ freq_tgt_target = 0x50D52; ++ break; ++ case 20000: ++ freq_tgt_target = 0x307FE; ++ break; ++ case 26000: ++ freq_tgt_target = 0x254EA; ++ break; ++ case 37400: ++ freq_tgt_target = 0x19EF8; ++ break; ++ case 52000: ++ freq_tgt_target = 0x12A75; ++ break; ++ } ++ break; ++ } ++ ++ if (!freq_tgt_target) { ++ bcma_err(bus, "Unknown TGT frequency for xtalfreq %d\n", ++ xtalfreq); ++ return; ++ } ++ ++ pll0 = bcma_chipco_pll_read(cc, BCMA_CC_PMU15_PLL_PLLCTL0); ++ freq_tgt_current = (pll0 & BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK) >> ++ BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT; ++ ++ if (freq_tgt_current == freq_tgt_target) { ++ bcma_debug(bus, "Target TGT frequency already set\n"); ++ return; ++ } ++ ++ /* Turn off PLL */ ++ switch (bus->chipinfo.id) { ++ case BCMA_CHIP_ID_BCM43142: ++ mask = (u32)~(BCMA_RES_4314_HT_AVAIL | ++ BCMA_RES_4314_MACPHY_CLK_AVAIL); ++ ++ bcma_cc_mask32(cc, BCMA_CC_PMU_MINRES_MSK, mask); ++ bcma_cc_mask32(cc, BCMA_CC_PMU_MAXRES_MSK, mask); ++ bcma_wait_value(cc->core, BCMA_CLKCTLST, ++ BCMA_CLKCTLST_HAVEHT, 0, 20000); ++ break; ++ } ++ ++ pll0 &= ~BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK; ++ pll0 |= freq_tgt_target << BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT; ++ bcma_chipco_pll_write(cc, BCMA_CC_PMU15_PLL_PLLCTL0, pll0); ++ ++ /* Flush */ ++ if (cc->pmu.rev >= 2) ++ bcma_cc_set32(cc, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD); ++ ++ /* TODO: Do we need to update OTP? */ ++} ++ ++static void bcma_pmu_pll_init(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ u32 xtalfreq = bcma_pmu_xtalfreq(cc); ++ ++ switch (bus->chipinfo.id) { ++ case BCMA_CHIP_ID_BCM43142: ++ if (xtalfreq == 0) ++ xtalfreq = 20000; ++ bcma_pmu2_pll_init0(cc, xtalfreq); ++ break; ++ } ++} ++ + static void bcma_pmu_resources_init(struct bcma_drv_cc *cc) + { + struct bcma_bus *bus = cc->core->bus; +@@ -65,6 +169,25 @@ static void bcma_pmu_resources_init(stru + min_msk = 0x200D; + max_msk = 0xFFFF; + break; ++ case BCMA_CHIP_ID_BCM43142: ++ min_msk = BCMA_RES_4314_LPLDO_PU | ++ BCMA_RES_4314_PMU_SLEEP_DIS | ++ BCMA_RES_4314_PMU_BG_PU | ++ BCMA_RES_4314_CBUCK_LPOM_PU | ++ BCMA_RES_4314_CBUCK_PFM_PU | ++ BCMA_RES_4314_CLDO_PU | ++ BCMA_RES_4314_LPLDO2_LVM | ++ BCMA_RES_4314_WL_PMU_PU | ++ BCMA_RES_4314_LDO3P3_PU | ++ BCMA_RES_4314_OTP_PU | ++ BCMA_RES_4314_WL_PWRSW_PU | ++ BCMA_RES_4314_LQ_AVAIL | ++ BCMA_RES_4314_LOGIC_RET | ++ BCMA_RES_4314_MEM_SLEEP | ++ BCMA_RES_4314_MACPHY_RET | ++ BCMA_RES_4314_WL_CORE_READY; ++ max_msk = 0x3FFFFFFF; ++ break; + default: + bcma_debug(bus, "PMU resource config unknown or not needed for device 0x%04X\n", + bus->chipinfo.id); +@@ -76,7 +199,10 @@ static void bcma_pmu_resources_init(stru if (max_msk) bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk); @@ -478,7 +741,7 @@ mdelay(2); } -@@ -101,7 +105,7 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct +@@ -101,7 +227,7 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct bcma_cc_write32(cc, BCMA_CC_CHIPCTL, val); } @@ -487,7 +750,7 @@ { struct bcma_bus *bus = cc->core->bus; -@@ -141,7 +145,7 @@ void bcma_pmu_workarounds(struct bcma_dr +@@ -141,7 +267,7 @@ void bcma_pmu_workarounds(struct bcma_dr } } @@ -496,7 +759,7 @@ { u32 pmucap; -@@ -150,7 +154,10 @@ void bcma_pmu_init(struct bcma_drv_cc *c +@@ -150,7 +276,10 @@ void bcma_pmu_init(struct bcma_drv_cc *c bcma_debug(cc->core->bus, "Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev, pmucap); @@ -507,7 +770,12 @@ if (cc->pmu.rev == 1) bcma_cc_mask32(cc, BCMA_CC_PMU_CTL, ~BCMA_CC_PMU_CTL_NOILPONW); -@@ -162,24 +169,40 @@ void bcma_pmu_init(struct bcma_drv_cc *c +@@ -158,28 +287,45 @@ void bcma_pmu_init(struct bcma_drv_cc *c + bcma_cc_set32(cc, BCMA_CC_PMU_CTL, + BCMA_CC_PMU_CTL_NOILPONW); + ++ bcma_pmu_pll_init(cc); + bcma_pmu_resources_init(cc); bcma_pmu_workarounds(cc); } @@ -553,7 +821,7 @@ default: bcma_warn(bus, "No ALP clock specified for %04X device, pmu rev. %d, using default %d Hz\n", bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK); -@@ -190,7 +213,7 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c +@@ -190,7 +336,7 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c /* Find the output of the "m" pll divider given pll controls that start with * pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc. */ @@ -562,7 +830,7 @@ { u32 tmp, div, ndiv, p1, p2, fc; struct bcma_bus *bus = cc->core->bus; -@@ -219,14 +242,14 @@ static u32 bcma_pmu_clock(struct bcma_dr +@@ -219,14 +365,14 @@ static u32 bcma_pmu_clock(struct bcma_dr ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT; /* Do calculation in Mhz */ @@ -579,16 +847,16 @@ { u32 tmp, ndiv, p1div, p2div; u32 clock; -@@ -257,7 +280,7 @@ static u32 bcma_pmu_clock_bcm4706(struct +@@ -257,7 +403,7 @@ static u32 bcma_pmu_clock_bcm4706(struct } /* query bus clock frequency for PMU-enabled chipcommon */ -u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc) -+static u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc) ++u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc) { struct bcma_bus *bus = cc->core->bus; -@@ -265,40 +288,42 @@ u32 bcma_pmu_get_clockcontrol(struct bcm +@@ -265,40 +411,43 @@ u32 bcma_pmu_get_clockcontrol(struct bcm case BCMA_CHIP_ID_BCM4716: case BCMA_CHIP_ID_BCM4748: case BCMA_CHIP_ID_BCM47162: @@ -622,6 +890,7 @@ } return BCMA_CC_PMU_HT_CLOCK; } ++EXPORT_SYMBOL_GPL(bcma_pmu_get_bus_clock); /* query cpu clock frequency for PMU-enabled chipcommon */ -u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc) @@ -642,7 +911,7 @@ BCMA_CC_PMU4706_MAINPLL_PLL0, BCMA_CC_PMU5_MAINPLL_CPU); case BCMA_CHIP_ID_BCM5356: -@@ -313,10 +338,11 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr +@@ -313,10 +462,11 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr break; } @@ -656,7 +925,7 @@ } static void bcma_pmu_spuravoid_pll_write(struct bcma_drv_cc *cc, u32 offset, -@@ -362,7 +388,7 @@ void bcma_pmu_spuravoid_pllupdate(struct +@@ -362,7 +512,7 @@ void bcma_pmu_spuravoid_pllupdate(struct tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT; bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp); @@ -665,7 +934,7 @@ break; case BCMA_CHIP_ID_BCM4331: -@@ -383,7 +409,7 @@ void bcma_pmu_spuravoid_pllupdate(struct +@@ -383,7 +533,7 @@ void bcma_pmu_spuravoid_pllupdate(struct bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2, 0x03000a08); } @@ -674,7 +943,7 @@ break; case BCMA_CHIP_ID_BCM43224: -@@ -416,7 +442,7 @@ void bcma_pmu_spuravoid_pllupdate(struct +@@ -416,7 +566,7 @@ void bcma_pmu_spuravoid_pllupdate(struct bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5, 0x88888815); } @@ -683,7 +952,7 @@ break; case BCMA_CHIP_ID_BCM4716: -@@ -450,7 +476,7 @@ void bcma_pmu_spuravoid_pllupdate(struct +@@ -450,7 +600,7 @@ void bcma_pmu_spuravoid_pllupdate(struct 0x88888815); } @@ -692,7 +961,7 @@ break; case BCMA_CHIP_ID_BCM43227: -@@ -486,7 +512,7 @@ void bcma_pmu_spuravoid_pllupdate(struct +@@ -486,7 +636,7 @@ void bcma_pmu_spuravoid_pllupdate(struct bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5, 0x88888815); } @@ -707,13 +976,14 @@ * Licensed under the GNU/GPL. See COPYING for details. */ ++#include "bcma_private.h" ++ +#include #include -#include -#include - #include "bcma_private.h" - +-#include "bcma_private.h" +static struct resource bcma_sflash_resource = { + .name = "bcma_sflash", + .start = BCMA_SOC_FLASH2, @@ -734,7 +1004,7 @@ + u16 numblocks; +}; + -+static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = { ++static const struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = { + { "M25P20", 0x11, 0x10000, 4, }, + { "M25P40", 0x12, 0x10000, 8, }, + @@ -745,7 +1015,7 @@ + { 0 }, +}; + -+static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = { ++static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = { + { "SST25WF512", 1, 0x1000, 16, }, + { "SST25VF512", 0x48, 0x1000, 16, }, + { "SST25WF010", 2, 0x1000, 32, }, @@ -763,7 +1033,7 @@ + { 0 }, +}; + -+static struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = { ++static const struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = { + { "AT45DB011", 0xc, 256, 512, }, + { "AT45DB021", 0x14, 256, 1024, }, + { "AT45DB041", 0x1c, 256, 2048, }, @@ -787,14 +1057,14 @@ + } + bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n"); +} -+ + /* Initialize serial flash access */ int bcma_sflash_init(struct bcma_drv_cc *cc) { - bcma_err(cc->core->bus, "Serial flash support is broken\n"); + struct bcma_bus *bus = cc->core->bus; + struct bcma_sflash *sflash = &cc->sflash; -+ struct bcma_sflash_tbl_e *e; ++ const struct bcma_sflash_tbl_e *e; + u32 id, id2; + + switch (cc->capabilities & BCMA_CC_CAP_FLASHT) { @@ -870,7 +1140,7 @@ } --- /dev/null +++ b/drivers/bcma/driver_gpio.c -@@ -0,0 +1,98 @@ +@@ -0,0 +1,114 @@ +/* + * Broadcom specific AMBA + * GPIO driver @@ -946,6 +1216,16 @@ + bcma_chipco_gpio_pullup(cc, 1 << gpio, 0); +} + ++static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) ++{ ++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip); ++ ++ if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC) ++ return bcma_core_irq(cc->core); ++ else ++ return -EINVAL; ++} ++ +int bcma_gpio_init(struct bcma_drv_cc *cc) +{ + struct gpio_chip *chip = &cc->gpio; @@ -958,6 +1238,7 @@ + chip->set = bcma_gpio_set_value; + chip->direction_input = bcma_gpio_direction_input; + chip->direction_output = bcma_gpio_direction_output; ++ chip->to_irq = bcma_gpio_to_irq; + chip->ngpio = 16; + /* There is just one SoC in one device and its GPIO addresses should be + * deterministic to address them more easily. The other buses could get @@ -969,9 +1250,48 @@ + + return gpiochip_add(chip); +} ++ ++int bcma_gpio_unregister(struct bcma_drv_cc *cc) ++{ ++ return gpiochip_remove(&cc->gpio); ++} --- a/drivers/bcma/driver_mips.c +++ b/drivers/bcma/driver_mips.c -@@ -74,11 +74,16 @@ static u32 bcma_core_mips_irqflag(struct +@@ -14,11 +14,33 @@ + + #include + ++#include ++#include + #include + #include + #include + #include + ++static const char * const part_probes[] = { "bcm47xxpart", NULL }; ++ ++static struct physmap_flash_data bcma_pflash_data = { ++ .part_probe_types = part_probes, ++}; ++ ++static struct resource bcma_pflash_resource = { ++ .name = "bcma_pflash", ++ .flags = IORESOURCE_MEM, ++}; ++ ++struct platform_device bcma_pflash_dev = { ++ .name = "physmap-flash", ++ .dev = { ++ .platform_data = &bcma_pflash_data, ++ }, ++ .resource = &bcma_pflash_resource, ++ .num_resources = 1, ++}; ++ + /* The 47162a0 hangs when reading MIPS DMP registers registers */ + static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev) + { +@@ -74,28 +96,41 @@ static u32 bcma_core_mips_irqflag(struct return dev->core_index; flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30); @@ -987,9 +1307,11 @@ + * If disabled, 5 is returned. + * If not supported, 6 is returned. */ - unsigned int bcma_core_mips_irq(struct bcma_device *dev) +-unsigned int bcma_core_mips_irq(struct bcma_device *dev) ++static unsigned int bcma_core_mips_irq(struct bcma_device *dev) { -@@ -87,13 +92,15 @@ unsigned int bcma_core_mips_irq(struct b + struct bcma_device *mdev = dev->bus->drv_mips.core; + u32 irqflag; unsigned int irq; irqflag = bcma_core_mips_irqflag(dev); @@ -1004,10 +1326,19 @@ - return 0; + return 5; ++} ++ ++unsigned int bcma_core_irq(struct bcma_device *dev) ++{ ++ unsigned int mips_irq = bcma_core_mips_irq(dev); ++ return mips_irq <= 4 ? mips_irq + 2 : 0; } - EXPORT_SYMBOL(bcma_core_mips_irq); +-EXPORT_SYMBOL(bcma_core_mips_irq); ++EXPORT_SYMBOL(bcma_core_irq); -@@ -114,8 +121,8 @@ static void bcma_core_mips_set_irq(struc + static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) + { +@@ -114,8 +149,8 @@ static void bcma_core_mips_set_irq(struc bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) & ~(1 << irqflag)); @@ -1018,7 +1349,7 @@ /* assign the new one */ if (irq == 0) { -@@ -123,9 +130,9 @@ static void bcma_core_mips_set_irq(struc +@@ -123,9 +158,9 @@ static void bcma_core_mips_set_irq(struc bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) | (1 << irqflag)); } else { @@ -1031,7 +1362,7 @@ struct bcma_device *core; /* backplane irq line is in use, find out who uses -@@ -133,7 +140,7 @@ static void bcma_core_mips_set_irq(struc +@@ -133,7 +168,7 @@ static void bcma_core_mips_set_irq(struc */ list_for_each_entry(core, &bus->cores, list) { if ((1 << bcma_core_mips_irqflag(core)) == @@ -1040,7 +1371,7 @@ bcma_core_mips_set_irq(core, 0); break; } -@@ -143,15 +150,31 @@ static void bcma_core_mips_set_irq(struc +@@ -143,15 +178,31 @@ static void bcma_core_mips_set_irq(struc 1 << irqflag); } @@ -1075,7 +1406,7 @@ for (i = 0; i <= 6; i++) printk(" %s%s", irq_name[i], i == irq ? "*" : " "); printk("\n"); -@@ -171,7 +194,7 @@ u32 bcma_cpu_clock(struct bcma_drv_mips +@@ -171,7 +222,7 @@ u32 bcma_cpu_clock(struct bcma_drv_mips struct bcma_bus *bus = mcore->core->bus; if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU) @@ -1084,11 +1415,12 @@ bcma_err(bus, "No PMU available, need this to get the cpu clock\n"); return 0; -@@ -181,85 +204,109 @@ EXPORT_SYMBOL(bcma_cpu_clock); +@@ -181,85 +232,143 @@ EXPORT_SYMBOL(bcma_cpu_clock); static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore) { struct bcma_bus *bus = mcore->core->bus; + struct bcma_drv_cc *cc = &bus->drv_cc; ++ struct bcma_pflash *pflash = &cc->pflash; - switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) { + switch (cc->capabilities & BCMA_CC_CAP_FLASHT) { @@ -1102,18 +1434,23 @@ bcma_debug(bus, "Found parallel flash\n"); - bus->drv_cc.pflash.window = 0x1c000000; - bus->drv_cc.pflash.window_size = 0x02000000; -+ cc->pflash.present = true; -+ cc->pflash.window = BCMA_SOC_FLASH2; -+ cc->pflash.window_size = BCMA_SOC_FLASH2_SZ; ++ pflash->present = true; ++ pflash->window = BCMA_SOC_FLASH2; ++ pflash->window_size = BCMA_SOC_FLASH2_SZ; - if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) & + if ((bcma_read32(cc->core, BCMA_CC_FLASH_CFG) & BCMA_CC_FLASH_CFG_DS) == 0) - bus->drv_cc.pflash.buswidth = 1; -+ cc->pflash.buswidth = 1; ++ pflash->buswidth = 1; else - bus->drv_cc.pflash.buswidth = 2; -+ cc->pflash.buswidth = 2; ++ pflash->buswidth = 2; ++ ++ bcma_pflash_data.width = pflash->buswidth; ++ bcma_pflash_resource.start = pflash->window; ++ bcma_pflash_resource.end = pflash->window + pflash->window_size; ++ break; default: bcma_err(bus, "Flash type not supported\n"); @@ -1143,6 +1480,32 @@ + + mcore->early_setup_done = true; +} ++ ++static void bcma_fix_i2s_irqflag(struct bcma_bus *bus) ++{ ++ struct bcma_device *cpu, *pcie, *i2s; ++ ++ /* Fixup the interrupts in 4716/4748 for i2s core (2010 Broadcom SDK) ++ * (IRQ flags > 7 are ignored when setting the interrupt masks) ++ */ ++ if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4716 && ++ bus->chipinfo.id != BCMA_CHIP_ID_BCM4748) ++ return; ++ ++ cpu = bcma_find_core(bus, BCMA_CORE_MIPS_74K); ++ pcie = bcma_find_core(bus, BCMA_CORE_PCIE); ++ i2s = bcma_find_core(bus, BCMA_CORE_I2S); ++ if (cpu && pcie && i2s && ++ bcma_aread32(cpu, BCMA_MIPS_OOBSELINA74) == 0x08060504 && ++ bcma_aread32(pcie, BCMA_MIPS_OOBSELINA74) == 0x08060504 && ++ bcma_aread32(i2s, BCMA_MIPS_OOBSELOUTA30) == 0x88) { ++ bcma_awrite32(cpu, BCMA_MIPS_OOBSELINA74, 0x07060504); ++ bcma_awrite32(pcie, BCMA_MIPS_OOBSELINA74, 0x07060504); ++ bcma_awrite32(i2s, BCMA_MIPS_OOBSELOUTA30, 0x87); ++ bcma_debug(bus, ++ "Moved i2s interrupt to oob line 7 instead of 8\n"); ++ } ++} + void bcma_core_mips_init(struct bcma_drv_mips *mcore) { @@ -1188,6 +1551,8 @@ - break; + bcma_core_mips_early_init(mcore); + ++ bcma_fix_i2s_irqflag(bus); ++ + switch (bus->chipinfo.id) { + case BCMA_CHIP_ID_BCM4716: + case BCMA_CHIP_ID_BCM4748: @@ -1224,7 +1589,7 @@ + break; + default: + list_for_each_entry(core, &bus->cores, list) { -+ core->irq = bcma_core_mips_irq(core) + 2; ++ core->irq = bcma_core_irq(core); } + bcma_err(bus, + "Unknown device (0x%x) found, can not configure IRQs\n", @@ -1284,7 +1649,130 @@ bcma_core_enable(pc->core, 0); return !mips_busprobe32(tmp, pc->core->io_addr); -@@ -396,6 +391,11 @@ void __devinit bcma_core_pci_hostmode_in +@@ -99,19 +94,19 @@ static int bcma_extpci_read_config(struc + if (dev == 0) { + /* we support only two functions on device 0 */ + if (func > 1) +- return -EINVAL; ++ goto out; + + /* accesses to config registers with offsets >= 256 + * requires indirect access. + */ + if (off >= PCI_CONFIG_SPACE_SIZE) { + addr = (func << 12); +- addr |= (off & 0x0FFF); ++ addr |= (off & 0x0FFC); + val = bcma_pcie_read_config(pc, addr); + } else { + addr = BCMA_CORE_PCI_PCICFG0; + addr |= (func << 8); +- addr |= (off & 0xfc); ++ addr |= (off & 0xFC); + val = pcicore_read32(pc, addr); + } + } else { +@@ -124,11 +119,9 @@ static int bcma_extpci_read_config(struc + goto out; + + if (mips_busprobe32(val, mmio)) { +- val = 0xffffffff; ++ val = 0xFFFFFFFF; + goto unmap; + } +- +- val = readl(mmio); + } + val >>= (8 * (off & 3)); + +@@ -156,7 +149,7 @@ static int bcma_extpci_write_config(stru + const void *buf, int len) + { + int err = -EINVAL; +- u32 addr = 0, val = 0; ++ u32 addr, val; + void __iomem *mmio = 0; + u16 chipid = pc->core->bus->chipinfo.id; + +@@ -164,16 +157,22 @@ static int bcma_extpci_write_config(stru + if (unlikely(len != 1 && len != 2 && len != 4)) + goto out; + if (dev == 0) { ++ /* we support only two functions on device 0 */ ++ if (func > 1) ++ goto out; ++ + /* accesses to config registers with offsets >= 256 + * requires indirect access. + */ +- if (off < PCI_CONFIG_SPACE_SIZE) { +- addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0; ++ if (off >= PCI_CONFIG_SPACE_SIZE) { ++ addr = (func << 12); ++ addr |= (off & 0x0FFC); ++ val = bcma_pcie_read_config(pc, addr); ++ } else { ++ addr = BCMA_CORE_PCI_PCICFG0; + addr |= (func << 8); +- addr |= (off & 0xfc); +- mmio = ioremap_nocache(addr, sizeof(val)); +- if (!mmio) +- goto out; ++ addr |= (off & 0xFC); ++ val = pcicore_read32(pc, addr); + } + } else { + addr = bcma_get_cfgspace_addr(pc, dev, func, off); +@@ -185,19 +184,17 @@ static int bcma_extpci_write_config(stru + goto out; + + if (mips_busprobe32(val, mmio)) { +- val = 0xffffffff; ++ val = 0xFFFFFFFF; + goto unmap; + } + } + + switch (len) { + case 1: +- val = readl(mmio); + val &= ~(0xFF << (8 * (off & 3))); + val |= *((const u8 *)buf) << (8 * (off & 3)); + break; + case 2: +- val = readl(mmio); + val &= ~(0xFFFF << (8 * (off & 3))); + val |= *((const u16 *)buf) << (8 * (off & 3)); + break; +@@ -205,13 +202,14 @@ static int bcma_extpci_write_config(stru + val = *((const u32 *)buf); + break; + } +- if (dev == 0 && !addr) { ++ if (dev == 0) { + /* accesses to config registers with offsets >= 256 + * requires indirect access. + */ +- addr = (func << 12); +- addr |= (off & 0x0FFF); +- bcma_pcie_write_config(pc, addr, val); ++ if (off >= PCI_CONFIG_SPACE_SIZE) ++ bcma_pcie_write_config(pc, addr, val); ++ else ++ pcicore_write32(pc, addr, val); + } else { + writel(val, mmio); + +@@ -282,7 +280,7 @@ static u8 __devinit bcma_find_pci_capabi + /* check for Header type 0 */ + bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val, + sizeof(u8)); +- if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL) ++ if ((byte_val & 0x7F) != PCI_HEADER_TYPE_NORMAL) + return cap_ptr; + + /* check if the capability pointer field exists */ +@@ -396,12 +394,19 @@ void __devinit bcma_core_pci_hostmode_in bcma_info(bus, "PCIEcore in host mode found\n"); @@ -1296,7 +1784,15 @@ pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL); if (!pc_host) { bcma_err(bus, "can not allocate memory"); -@@ -425,9 +425,9 @@ void __devinit bcma_core_pci_hostmode_in + return; + } + ++ spin_lock_init(&pc_host->cfgspace_lock); ++ + pc->host_controller = pc_host; + pc_host->pci_controller.io_resource = &pc_host->io_resource; + pc_host->pci_controller.mem_resource = &pc_host->mem_resource; +@@ -425,9 +430,9 @@ void __devinit bcma_core_pci_hostmode_in pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED; /* Reset RC */ @@ -1304,11 +1800,11 @@ + usleep_range(3000, 5000); pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE); - udelay(1000); -+ usleep_range(1000, 2000); ++ msleep(50); pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST | BCMA_CORE_PCI_CTL_RST_OE); -@@ -452,6 +452,8 @@ void __devinit bcma_core_pci_hostmode_in +@@ -452,6 +457,8 @@ void __devinit bcma_core_pci_hostmode_in pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + BCMA_SOC_PCI_MEM_SZ - 1; @@ -1317,7 +1813,7 @@ pci_membase_1G = BCMA_SOC_PCIE_DMA_H32; pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, tmp | BCMA_SOC_PCI_MEM); -@@ -459,6 +461,8 @@ void __devinit bcma_core_pci_hostmode_in +@@ -459,6 +466,8 @@ void __devinit bcma_core_pci_hostmode_in pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM; pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM + BCMA_SOC_PCI_MEM_SZ - 1; @@ -1326,7 +1822,7 @@ pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32; pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG; pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, -@@ -481,7 +485,7 @@ void __devinit bcma_core_pci_hostmode_in +@@ -481,10 +490,21 @@ void __devinit bcma_core_pci_hostmode_in * before issuing configuration requests to PCI Express * devices. */ @@ -1335,7 +1831,21 @@ bcma_core_pci_enable_crs(pc); -@@ -501,7 +505,7 @@ void __devinit bcma_core_pci_hostmode_in ++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706 || ++ bus->chipinfo.id == BCMA_CHIP_ID_BCM4716) { ++ u16 val16; ++ bcma_extpci_read_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL, ++ &val16, sizeof(val16)); ++ val16 |= (2 << 5); /* Max payload size of 512 */ ++ val16 |= (2 << 12); /* MRRS 512 */ ++ bcma_extpci_write_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL, ++ &val16, sizeof(val16)); ++ } ++ + /* Enable PCI bridge BAR0 memory & master access */ + tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp)); +@@ -501,7 +521,7 @@ void __devinit bcma_core_pci_hostmode_in set_io_port_base(pc_host->pci_controller.io_map_base); /* Give some time to the PCI controller to configure itself with the new * values. Not waiting at this point causes crashes of the machine. */ @@ -1344,7 +1854,7 @@ register_pci_controller(&pc_host->pci_controller); return; } -@@ -534,7 +538,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ +@@ -534,7 +554,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ static void bcma_core_pci_fixup_addresses(struct pci_dev *dev) { struct resource *res; @@ -1353,7 +1863,7 @@ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { /* This is not a device on the PCI-core bridge. */ -@@ -547,8 +551,12 @@ static void bcma_core_pci_fixup_addresse +@@ -547,8 +567,12 @@ static void bcma_core_pci_fixup_addresse for (pos = 0; pos < 6; pos++) { res = &dev->resource[pos]; @@ -1368,6 +1878,23 @@ } } DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses); +@@ -569,7 +593,7 @@ int bcma_core_pci_plat_dev_init(struct p + pr_info("PCI: Fixing up device %s\n", pci_name(dev)); + + /* Fix up interrupt lines */ +- dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2; ++ dev->irq = bcma_core_irq(pc_host->pdev->core); + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + + return 0; +@@ -588,6 +612,6 @@ int bcma_core_pci_pcibios_map_irq(const + + pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, + pci_ops); +- return bcma_core_mips_irq(pc_host->pdev->core) + 2; ++ return bcma_core_irq(pc_host->pdev->core); + } + EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq); --- a/drivers/bcma/host_pci.c +++ b/drivers/bcma/host_pci.c @@ -77,8 +77,8 @@ static void bcma_host_pci_write32(struct @@ -1425,14 +1952,16 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) }, -@@ -272,6 +273,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_ +@@ -272,7 +273,9 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) }, ++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4365) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) }, { 0, }, + }; --- a/drivers/bcma/host_soc.c +++ b/drivers/bcma/host_soc.c @@ -143,7 +143,7 @@ static void bcma_host_soc_awrite32(struc @@ -1454,7 +1983,7 @@ #include #include -@@ -80,6 +81,18 @@ struct bcma_device *bcma_find_core(struc +@@ -80,6 +81,37 @@ struct bcma_device *bcma_find_core(struc } EXPORT_SYMBOL_GPL(bcma_find_core); @@ -1469,14 +1998,53 @@ + } + return NULL; +} ++ ++bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value, ++ int timeout) ++{ ++ unsigned long deadline = jiffies + timeout; ++ u32 val; ++ ++ do { ++ val = bcma_read32(core, reg); ++ if ((val & mask) == value) ++ return true; ++ cpu_relax(); ++ udelay(10); ++ } while (!time_after_eq(jiffies, deadline)); ++ ++ bcma_warn(core->bus, "Timeout waiting for register 0x%04X!\n", reg); ++ ++ return false; ++} + static void bcma_release_core_dev(struct device *dev) { struct bcma_device *core = container_of(dev, struct bcma_device, dev); -@@ -136,6 +149,33 @@ static int bcma_register_cores(struct bc +@@ -107,6 +139,11 @@ static int bcma_register_cores(struct bc + continue; + } + ++ /* Only first GMAC core on BCM4706 is connected and working */ ++ if (core->id.id == BCMA_CORE_4706_MAC_GBIT && ++ core->core_unit > 0) ++ continue; ++ + core->dev.release = bcma_release_core_dev; + core->dev.bus = &bcma_bus_type; + dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id); +@@ -136,6 +173,41 @@ static int bcma_register_cores(struct bc dev_id++; } ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++ if (bus->drv_cc.pflash.present) { ++ err = platform_device_register(&bcma_pflash_dev); ++ if (err) ++ bcma_err(bus, "Error registering parallel flash\n"); ++ } ++#endif ++ +#ifdef CONFIG_BCMA_SFLASH + if (bus->drv_cc.sflash.present) { + err = platform_device_register(&bcma_sflash_dev); @@ -1507,7 +2075,7 @@ return 0; } -@@ -148,6 +188,8 @@ static void bcma_unregister_cores(struct +@@ -148,6 +220,8 @@ static void bcma_unregister_cores(struct if (core->dev_registered) device_unregister(&core->dev); } @@ -1516,7 +2084,7 @@ } int __devinit bcma_bus_register(struct bcma_bus *bus) -@@ -166,6 +208,20 @@ int __devinit bcma_bus_register(struct b +@@ -166,6 +240,20 @@ int __devinit bcma_bus_register(struct b return -1; } @@ -1537,28 +2105,28 @@ /* Init CC core */ core = bcma_find_core(bus, bcma_cc_core_id(bus)); if (core) { -@@ -181,10 +237,17 @@ int __devinit bcma_bus_register(struct b +@@ -181,10 +269,17 @@ int __devinit bcma_bus_register(struct b } /* Init PCIE core */ - core = bcma_find_core(bus, BCMA_CORE_PCIE); + core = bcma_find_core_unit(bus, BCMA_CORE_PCIE, 0); -+ if (core) { + if (core) { +- bus->drv_pci.core = core; +- bcma_core_pci_init(&bus->drv_pci); + bus->drv_pci[0].core = core; + bcma_core_pci_init(&bus->drv_pci[0]); + } + + /* Init PCIE core */ + core = bcma_find_core_unit(bus, BCMA_CORE_PCIE, 1); - if (core) { -- bus->drv_pci.core = core; -- bcma_core_pci_init(&bus->drv_pci); ++ if (core) { + bus->drv_pci[1].core = core; + bcma_core_pci_init(&bus->drv_pci[1]); } /* Init GBIT MAC COMMON core */ -@@ -194,13 +257,6 @@ int __devinit bcma_bus_register(struct b +@@ -194,13 +289,6 @@ int __devinit bcma_bus_register(struct b bcma_core_gmac_cmn_init(&bus->drv_gmac_cmn); } @@ -1572,11 +2140,18 @@ /* Register found cores */ bcma_register_cores(bus); -@@ -211,7 +267,17 @@ int __devinit bcma_bus_register(struct b +@@ -211,7 +299,24 @@ int __devinit bcma_bus_register(struct b void bcma_bus_unregister(struct bcma_bus *bus) { + struct bcma_device *cores[3]; ++ int err; ++ ++ err = bcma_gpio_unregister(&bus->drv_cc); ++ if (err == -EBUSY) ++ bcma_err(bus, "Some GPIOs are still in use.\n"); ++ else if (err) ++ bcma_err(bus, "Can not unregister GPIO driver: %i\n", err); + + cores[0] = bcma_find_core(bus, BCMA_CORE_MIPS_74K); + cores[1] = bcma_find_core(bus, BCMA_CORE_PCIE); @@ -1590,7 +2165,7 @@ } int __init bcma_bus_early_register(struct bcma_bus *bus, -@@ -248,18 +314,18 @@ int __init bcma_bus_early_register(struc +@@ -248,18 +353,18 @@ int __init bcma_bus_early_register(struc return -1; } @@ -1613,9 +2188,194 @@ } bcma_info(bus, "Early bus registered\n"); +--- a/drivers/bcma/scan.c ++++ b/drivers/bcma/scan.c +@@ -84,6 +84,8 @@ static const struct bcma_device_id_name + { BCMA_CORE_I2S, "I2S" }, + { BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" }, + { BCMA_CORE_SHIM, "SHIM" }, ++ { BCMA_CORE_PCIE2, "PCIe Gen2" }, ++ { BCMA_CORE_ARM_CR4, "ARM CR4" }, + { BCMA_CORE_DEFAULT, "Default" }, + }; + +@@ -137,19 +139,19 @@ static void bcma_scan_switch_core(struct + addr); + } + +-static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 **eromptr) ++static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 __iomem **eromptr) + { + u32 ent = readl(*eromptr); + (*eromptr)++; + return ent; + } + +-static void bcma_erom_push_ent(u32 **eromptr) ++static void bcma_erom_push_ent(u32 __iomem **eromptr) + { + (*eromptr)--; + } + +-static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 **eromptr) ++static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 __iomem **eromptr) + { + u32 ent = bcma_erom_get_ent(bus, eromptr); + if (!(ent & SCAN_ER_VALID)) +@@ -159,14 +161,14 @@ static s32 bcma_erom_get_ci(struct bcma_ + return ent; + } + +-static bool bcma_erom_is_end(struct bcma_bus *bus, u32 **eromptr) ++static bool bcma_erom_is_end(struct bcma_bus *bus, u32 __iomem **eromptr) + { + u32 ent = bcma_erom_get_ent(bus, eromptr); + bcma_erom_push_ent(eromptr); + return (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID)); + } + +-static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 **eromptr) ++static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 __iomem **eromptr) + { + u32 ent = bcma_erom_get_ent(bus, eromptr); + bcma_erom_push_ent(eromptr); +@@ -175,7 +177,7 @@ static bool bcma_erom_is_bridge(struct b + ((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE)); + } + +-static void bcma_erom_skip_component(struct bcma_bus *bus, u32 **eromptr) ++static void bcma_erom_skip_component(struct bcma_bus *bus, u32 __iomem **eromptr) + { + u32 ent; + while (1) { +@@ -189,7 +191,7 @@ static void bcma_erom_skip_component(str + bcma_erom_push_ent(eromptr); + } + +-static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 **eromptr) ++static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 __iomem **eromptr) + { + u32 ent = bcma_erom_get_ent(bus, eromptr); + if (!(ent & SCAN_ER_VALID)) +@@ -199,7 +201,7 @@ static s32 bcma_erom_get_mst_port(struct + return ent; + } + +-static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr, ++static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr, + u32 type, u8 port) + { + u32 addrl, addrh, sizel, sizeh = 0; --- a/drivers/bcma/sprom.c +++ b/drivers/bcma/sprom.c -@@ -507,7 +507,9 @@ static bool bcma_sprom_onchip_available( +@@ -72,12 +72,12 @@ fail: + * R/W ops. + **************************************************/ + +-static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom) ++static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom, ++ size_t words) + { + int i; +- for (i = 0; i < SSB_SPROMSIZE_WORDS_R4; i++) +- sprom[i] = bcma_read16(bus->drv_cc.core, +- offset + (i * 2)); ++ for (i = 0; i < words; i++) ++ sprom[i] = bcma_read16(bus->drv_cc.core, offset + (i * 2)); + } + + /************************************************** +@@ -124,29 +124,29 @@ static inline u8 bcma_crc8(u8 crc, u8 da + return t[crc ^ data]; + } + +-static u8 bcma_sprom_crc(const u16 *sprom) ++static u8 bcma_sprom_crc(const u16 *sprom, size_t words) + { + int word; + u8 crc = 0xFF; + +- for (word = 0; word < SSB_SPROMSIZE_WORDS_R4 - 1; word++) { ++ for (word = 0; word < words - 1; word++) { + crc = bcma_crc8(crc, sprom[word] & 0x00FF); + crc = bcma_crc8(crc, (sprom[word] & 0xFF00) >> 8); + } +- crc = bcma_crc8(crc, sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & 0x00FF); ++ crc = bcma_crc8(crc, sprom[words - 1] & 0x00FF); + crc ^= 0xFF; + + return crc; + } + +-static int bcma_sprom_check_crc(const u16 *sprom) ++static int bcma_sprom_check_crc(const u16 *sprom, size_t words) + { + u8 crc; + u8 expected_crc; + u16 tmp; + +- crc = bcma_sprom_crc(sprom); +- tmp = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_CRC; ++ crc = bcma_sprom_crc(sprom, words); ++ tmp = sprom[words - 1] & SSB_SPROM_REVISION_CRC; + expected_crc = tmp >> SSB_SPROM_REVISION_CRC_SHIFT; + if (crc != expected_crc) + return -EPROTO; +@@ -154,21 +154,25 @@ static int bcma_sprom_check_crc(const u1 + return 0; + } + +-static int bcma_sprom_valid(const u16 *sprom) ++static int bcma_sprom_valid(struct bcma_bus *bus, const u16 *sprom, ++ size_t words) + { + u16 revision; + int err; + +- err = bcma_sprom_check_crc(sprom); ++ err = bcma_sprom_check_crc(sprom, words); + if (err) + return err; + +- revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_REV; +- if (revision != 8 && revision != 9) { ++ revision = sprom[words - 1] & SSB_SPROM_REVISION_REV; ++ if (revision != 8 && revision != 9 && revision != 10) { + pr_err("Unsupported SPROM revision: %d\n", revision); + return -ENOENT; + } + ++ bus->sprom.revision = revision; ++ bcma_debug(bus, "Found SPROM revision %d\n", revision); ++ + return 0; + } + +@@ -208,15 +212,13 @@ static void bcma_sprom_extract_r8(struct + BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != + ARRAY_SIZE(bus->sprom.core_pwr_info)); + +- bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & +- SSB_SPROM_REVISION_REV; +- + for (i = 0; i < 3; i++) { + v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i]; + *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); + } + + SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0); ++ SPEX(board_type, SSB_SPROM1_SPID, ~0, 0); + + SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0, + SSB_SPROM4_TXPID2G0_SHIFT); +@@ -501,13 +503,15 @@ static bool bcma_sprom_onchip_available( + case BCMA_CHIP_ID_BCM4331: + present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT; + break; +- ++ case BCMA_CHIP_ID_BCM43142: + case BCMA_CHIP_ID_BCM43224: + case BCMA_CHIP_ID_BCM43225: /* for these chips OTP is always available */ present = true; break; @@ -1625,19 +2385,68 @@ present = chip_status & BCMA_CC_CHIPST_43228_OTP_PRESENT; break; default: -@@ -593,8 +595,11 @@ int bcma_sprom_get(struct bcma_bus *bus) +@@ -547,7 +551,9 @@ int bcma_sprom_get(struct bcma_bus *bus) + { + u16 offset = BCMA_CC_SPROM; + u16 *sprom; +- int err = 0; ++ size_t sprom_sizes[] = { SSB_SPROMSIZE_WORDS_R4, ++ SSB_SPROMSIZE_WORDS_R10, }; ++ int i, err = 0; + + if (!bus->drv_cc.core) + return -EOPNOTSUPP; +@@ -576,29 +582,37 @@ int bcma_sprom_get(struct bcma_bus *bus) + } + } + +- sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), +- GFP_KERNEL); +- if (!sprom) +- return -ENOMEM; +- + if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 || + bus->chipinfo.id == BCMA_CHIP_ID_BCM43431) + bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); + + bcma_debug(bus, "SPROM offset 0x%x\n", offset); +- bcma_sprom_read(bus, offset, sprom); ++ for (i = 0; i < ARRAY_SIZE(sprom_sizes); i++) { ++ size_t words = sprom_sizes[i]; ++ ++ sprom = kcalloc(words, sizeof(u16), GFP_KERNEL); ++ if (!sprom) ++ return -ENOMEM; ++ ++ bcma_sprom_read(bus, offset, sprom, words); ++ err = bcma_sprom_valid(bus, sprom, words); ++ if (!err) ++ break; ++ ++ kfree(sprom); ++ } + + if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 || + bus->chipinfo.id == BCMA_CHIP_ID_BCM43431) bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true); - err = bcma_sprom_valid(sprom); +- err = bcma_sprom_valid(sprom); - if (err) +- goto out; +- +- bcma_sprom_extract_r8(bus, sprom); + if (err) { -+ bcma_warn(bus, "invalid sprom read from the PCIe card, try to use fallback sprom\n"); ++ bcma_warn(bus, "Invalid SPROM read from the PCIe card, trying to use fallback SPROM\n"); + err = bcma_fill_sprom_with_fallback(bus, &bus->sprom); - goto out; ++ } else { ++ bcma_sprom_extract_r8(bus, sprom); ++ kfree(sprom); + } - bcma_sprom_extract_r8(bus, sprom); - +-out: +- kfree(sprom); + return err; + } --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -10,7 +10,7 @@ @@ -1649,15 +2458,25 @@ struct bcma_device; struct bcma_bus; -@@ -134,6 +134,7 @@ struct bcma_host_ops { +@@ -134,12 +134,17 @@ struct bcma_host_ops { #define BCMA_CORE_I2S 0x834 #define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */ #define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */ -+#define BCMA_CORE_ARM_CR4 0x83e ++#define BCMA_CORE_PHY_AC 0x83B ++#define BCMA_CORE_PCIE2 0x83C /* PCI Express Gen2 */ ++#define BCMA_CORE_USB30_DEV 0x83D ++#define BCMA_CORE_ARM_CR4 0x83E #define BCMA_CORE_DEFAULT 0xFFF #define BCMA_MAX_NR_CORES 16 -@@ -157,6 +158,7 @@ struct bcma_host_ops { + + /* Chip IDs of PCIe devices */ + #define BCMA_CHIP_ID_BCM4313 0x4313 ++#define BCMA_CHIP_ID_BCM43142 43142 + #define BCMA_CHIP_ID_BCM43224 43224 + #define BCMA_PKG_ID_BCM43224_FAB_CSM 0x8 + #define BCMA_PKG_ID_BCM43224_FAB_SMIC 0xa +@@ -157,6 +162,7 @@ struct bcma_host_ops { /* Chip IDs of SoCs */ #define BCMA_CHIP_ID_BCM4706 0x5300 @@ -1665,7 +2484,7 @@ #define BCMA_CHIP_ID_BCM4716 0x4716 #define BCMA_PKG_ID_BCM4716 8 #define BCMA_PKG_ID_BCM4717 9 -@@ -166,7 +168,11 @@ struct bcma_host_ops { +@@ -166,7 +172,65 @@ struct bcma_host_ops { #define BCMA_CHIP_ID_BCM4749 0x4749 #define BCMA_CHIP_ID_BCM5356 0x5356 #define BCMA_CHIP_ID_BCM5357 0x5357 @@ -1674,10 +2493,64 @@ +#define BCMA_PKG_ID_BCM5357 11 #define BCMA_CHIP_ID_BCM53572 53572 +#define BCMA_PKG_ID_BCM47188 9 ++ ++/* Board types (on PCI usually equals to the subsystem dev id) */ ++/* BCM4313 */ ++#define BCMA_BOARD_TYPE_BCM94313BU 0X050F ++#define BCMA_BOARD_TYPE_BCM94313HM 0X0510 ++#define BCMA_BOARD_TYPE_BCM94313EPA 0X0511 ++#define BCMA_BOARD_TYPE_BCM94313HMG 0X051C ++/* BCM4716 */ ++#define BCMA_BOARD_TYPE_BCM94716NR2 0X04CD ++/* BCM43224 */ ++#define BCMA_BOARD_TYPE_BCM943224X21 0X056E ++#define BCMA_BOARD_TYPE_BCM943224X21_FCC 0X00D1 ++#define BCMA_BOARD_TYPE_BCM943224X21B 0X00E9 ++#define BCMA_BOARD_TYPE_BCM943224M93 0X008B ++#define BCMA_BOARD_TYPE_BCM943224M93A 0X0090 ++#define BCMA_BOARD_TYPE_BCM943224X16 0X0093 ++#define BCMA_BOARD_TYPE_BCM94322X9 0X008D ++#define BCMA_BOARD_TYPE_BCM94322M35E 0X008E ++/* BCM43228 */ ++#define BCMA_BOARD_TYPE_BCM943228BU8 0X0540 ++#define BCMA_BOARD_TYPE_BCM943228BU9 0X0541 ++#define BCMA_BOARD_TYPE_BCM943228BU 0X0542 ++#define BCMA_BOARD_TYPE_BCM943227HM4L 0X0543 ++#define BCMA_BOARD_TYPE_BCM943227HMB 0X0544 ++#define BCMA_BOARD_TYPE_BCM943228HM4L 0X0545 ++#define BCMA_BOARD_TYPE_BCM943228SD 0X0573 ++/* BCM4331 */ ++#define BCMA_BOARD_TYPE_BCM94331X19 0X00D6 ++#define BCMA_BOARD_TYPE_BCM94331X28 0X00E4 ++#define BCMA_BOARD_TYPE_BCM94331X28B 0X010E ++#define BCMA_BOARD_TYPE_BCM94331PCIEBT3AX 0X00E4 ++#define BCMA_BOARD_TYPE_BCM94331X12_2G 0X00EC ++#define BCMA_BOARD_TYPE_BCM94331X12_5G 0X00ED ++#define BCMA_BOARD_TYPE_BCM94331X29B 0X00EF ++#define BCMA_BOARD_TYPE_BCM94331CSAX 0X00EF ++#define BCMA_BOARD_TYPE_BCM94331X19C 0X00F5 ++#define BCMA_BOARD_TYPE_BCM94331X33 0X00F4 ++#define BCMA_BOARD_TYPE_BCM94331BU 0X0523 ++#define BCMA_BOARD_TYPE_BCM94331S9BU 0X0524 ++#define BCMA_BOARD_TYPE_BCM94331MC 0X0525 ++#define BCMA_BOARD_TYPE_BCM94331MCI 0X0526 ++#define BCMA_BOARD_TYPE_BCM94331PCIEBT4 0X0527 ++#define BCMA_BOARD_TYPE_BCM94331HM 0X0574 ++#define BCMA_BOARD_TYPE_BCM94331PCIEDUAL 0X059B ++#define BCMA_BOARD_TYPE_BCM94331MCH5 0X05A9 ++#define BCMA_BOARD_TYPE_BCM94331CS 0X05C6 ++#define BCMA_BOARD_TYPE_BCM94331CD 0X05DA ++/* BCM53572 */ ++#define BCMA_BOARD_TYPE_BCM953572BU 0X058D ++#define BCMA_BOARD_TYPE_BCM953572NR2 0X058E ++#define BCMA_BOARD_TYPE_BCM947188NR2 0X058F ++#define BCMA_BOARD_TYPE_BCM953572SDRNR2 0X0590 ++/* BCM43142 */ ++#define BCMA_BOARD_TYPE_BCM943142HM 0X05E0 struct bcma_device { struct bcma_bus *bus; -@@ -251,7 +257,7 @@ struct bcma_bus { +@@ -251,7 +315,7 @@ struct bcma_bus { u8 num; struct bcma_drv_cc drv_cc; @@ -1686,7 +2559,7 @@ struct bcma_drv_mips drv_mips; struct bcma_drv_gmac_cmn drv_gmac_cmn; -@@ -345,6 +351,7 @@ extern void bcma_core_set_clockmode(stru +@@ -345,6 +409,7 @@ extern void bcma_core_set_clockmode(stru enum bcma_clkmode clkmode); extern void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status, bool on); @@ -1706,6 +2579,15 @@ /** ChipCommon core registers. **/ #define BCMA_CC_ID 0x0000 #define BCMA_CC_ID_ID 0x0000FFFF +@@ -24,7 +27,7 @@ + #define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */ + #define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */ + #define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ +-#define BCMA_CC_FLASHT_NFLASH 0x00000200 /* NAND flash */ ++#define BCMA_CC_FLASHT_NAND 0x00000300 /* NAND flash */ + #define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ + #define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ + #define BCMA_PLLTYPE_NONE 0x00000000 @@ -100,6 +103,8 @@ #define BCMA_CC_CHIPST_4706_SFLASH_TYPE BIT(2) /* 0: 8b-p/ST-s flash, 1: 16b-p/Atmal-s flash */ #define BCMA_CC_CHIPST_4706_MIPS_BENDIAN BIT(3) /* 0: little, 1: big endian */ @@ -1755,9 +2637,24 @@ #define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400 #define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ #define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ -@@ -325,6 +356,60 @@ +@@ -299,6 +330,8 @@ + #define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */ + #define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */ + #define BCMA_CC_PMU_STAT 0x0608 /* PMU status */ ++#define BCMA_CC_PMU_STAT_EXT_LPO_AVAIL 0x00000100 ++#define BCMA_CC_PMU_STAT_WDRESET 0x00000080 + #define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */ + #define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */ + #define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */ +@@ -324,7 +357,66 @@ + #define BCMA_CC_REGCTL_DATA 0x065C #define BCMA_CC_PLLCTL_ADDR 0x0660 #define BCMA_CC_PLLCTL_DATA 0x0664 ++#define BCMA_CC_PMU_STRAPOPT 0x0668 /* (corerev >= 28) */ ++#define BCMA_CC_PMU_XTAL_FREQ 0x066C /* (pmurev >= 10) */ ++#define BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK 0x00001FFF ++#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_MASK 0x80000000 ++#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT 31 #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ +/* NAND flash MLC controller registers (corerev >= 38) */ +#define BCMA_CC_NAND_REVISION 0x0C00 @@ -1816,7 +2713,31 @@ /* Divider allocation in 4716/47162/5356 */ #define BCMA_CC_PMU5_MAINPLL_CPU 1 -@@ -415,6 +500,13 @@ +@@ -350,6 +442,23 @@ + #define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK 0x00000007 + #define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT 0 + ++/* PMU rev 15 */ ++#define BCMA_CC_PMU15_PLL_PLLCTL0 0 ++#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_MASK 0x00000003 ++#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_SHIFT 0 ++#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK 0x003FFFFC ++#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT 2 ++#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_MASK 0x00C00000 ++#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_SHIFT 22 ++#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_MASK 0x07000000 ++#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_SHIFT 24 ++#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_MASK 0x38000000 ++#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_SHIFT 27 ++#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_MASK 0x40000000 ++#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_SHIFT 30 ++#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_MASK 0x80000000 ++#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_SHIFT 31 ++ + /* ALP clock on pre-PMU chips */ + #define BCMA_CC_PMU_ALP_CLOCK 20000000 + /* HT clock for systems with PMU-enabled chipcommon */ +@@ -415,6 +524,44 @@ /* 4313 Chip specific ChipControl register bits */ #define BCMA_CCTRL_4313_12MA_LED_DRIVE 0x00000007 /* 12 mA drive strengh for later 4313 */ @@ -1826,11 +2747,42 @@ +#define BCMA_CHIPCTL_5357_NFLASH BIT(16) +#define BCMA_CHIPCTL_5357_I2S_PINS_ENABLE BIT(18) +#define BCMA_CHIPCTL_5357_I2CSPI_PINS_ENABLE BIT(19) ++ ++#define BCMA_RES_4314_LPLDO_PU BIT(0) ++#define BCMA_RES_4314_PMU_SLEEP_DIS BIT(1) ++#define BCMA_RES_4314_PMU_BG_PU BIT(2) ++#define BCMA_RES_4314_CBUCK_LPOM_PU BIT(3) ++#define BCMA_RES_4314_CBUCK_PFM_PU BIT(4) ++#define BCMA_RES_4314_CLDO_PU BIT(5) ++#define BCMA_RES_4314_LPLDO2_LVM BIT(6) ++#define BCMA_RES_4314_WL_PMU_PU BIT(7) ++#define BCMA_RES_4314_LNLDO_PU BIT(8) ++#define BCMA_RES_4314_LDO3P3_PU BIT(9) ++#define BCMA_RES_4314_OTP_PU BIT(10) ++#define BCMA_RES_4314_XTAL_PU BIT(11) ++#define BCMA_RES_4314_WL_PWRSW_PU BIT(12) ++#define BCMA_RES_4314_LQ_AVAIL BIT(13) ++#define BCMA_RES_4314_LOGIC_RET BIT(14) ++#define BCMA_RES_4314_MEM_SLEEP BIT(15) ++#define BCMA_RES_4314_MACPHY_RET BIT(16) ++#define BCMA_RES_4314_WL_CORE_READY BIT(17) ++#define BCMA_RES_4314_ILP_REQ BIT(18) ++#define BCMA_RES_4314_ALP_AVAIL BIT(19) ++#define BCMA_RES_4314_MISC_PWRSW_PU BIT(20) ++#define BCMA_RES_4314_SYNTH_PWRSW_PU BIT(21) ++#define BCMA_RES_4314_RX_PWRSW_PU BIT(22) ++#define BCMA_RES_4314_RADIO_PU BIT(23) ++#define BCMA_RES_4314_VCO_LDO_PU BIT(24) ++#define BCMA_RES_4314_AFE_LDO_PU BIT(25) ++#define BCMA_RES_4314_RX_LDO_PU BIT(26) ++#define BCMA_RES_4314_TX_LDO_PU BIT(27) ++#define BCMA_RES_4314_HT_AVAIL BIT(28) ++#define BCMA_RES_4314_MACPHY_CLK_AVAIL BIT(29) + /* Data for the PMU, if available. * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) */ -@@ -425,11 +517,35 @@ struct bcma_chipcommon_pmu { +@@ -425,11 +572,36 @@ struct bcma_chipcommon_pmu { #ifdef CONFIG_BCMA_DRIVER_MIPS struct bcma_pflash { @@ -1849,6 +2801,7 @@ + u32 size; + + struct mtd_info *mtd; ++ void *priv; +}; +#endif + @@ -1866,7 +2819,7 @@ struct bcma_serial_port { void *regs; unsigned long clockspeed; -@@ -445,15 +561,30 @@ struct bcma_drv_cc { +@@ -445,15 +617,30 @@ struct bcma_drv_cc { u32 capabilities; u32 capabilities_ext; u8 setup_done:1; @@ -1897,7 +2850,7 @@ }; /* Register access */ -@@ -470,14 +601,16 @@ struct bcma_drv_cc { +@@ -470,14 +657,16 @@ struct bcma_drv_cc { bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set)) extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc); @@ -1916,7 +2869,7 @@ void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value); -@@ -490,9 +623,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_d +@@ -490,9 +679,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_d u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value); u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value); u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value); @@ -1929,9 +2882,24 @@ extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value); +@@ -504,4 +696,6 @@ extern void bcma_chipco_regctl_maskset(s + u32 offset, u32 mask, u32 set); + extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid); + ++extern u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc); ++ + #endif /* LINUX_BCMA_DRIVER_CC_H_ */ --- a/include/linux/bcma/bcma_driver_mips.h +++ b/include/linux/bcma/bcma_driver_mips.h -@@ -35,13 +35,15 @@ struct bcma_device; +@@ -28,6 +28,7 @@ + #define BCMA_MIPS_MIPS74K_GPIOEN 0x0048 + #define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0 + ++#define BCMA_MIPS_OOBSELINA74 0x004 + #define BCMA_MIPS_OOBSELOUTA30 0x100 + + struct bcma_device; +@@ -35,17 +36,24 @@ struct bcma_device; struct bcma_drv_mips { struct bcma_device *core; u8 setup_done:1; @@ -1942,12 +2910,34 @@ #ifdef CONFIG_BCMA_DRIVER_MIPS extern void bcma_core_mips_init(struct bcma_drv_mips *mcore); +extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore); ++ ++extern unsigned int bcma_core_irq(struct bcma_device *core); #else static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { } +static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { } ++ ++static inline unsigned int bcma_core_irq(struct bcma_device *core) ++{ ++ return 0; ++} #endif extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); + +-extern unsigned int bcma_core_mips_irq(struct bcma_device *dev); +- + #endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ +--- a/include/linux/bcma/bcma_driver_pci.h ++++ b/include/linux/bcma/bcma_driver_pci.h +@@ -179,6 +179,8 @@ struct pci_dev; + #define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */ + #define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */ + ++#define BCMA_CORE_PCI_CFG_DEVCTRL 0xd8 ++ + /* PCIE Root Capability Register bits (Host mode only) */ + #define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 + --- a/include/linux/bcma/bcma_regs.h +++ b/include/linux/bcma/bcma_regs.h @@ -11,11 +11,13 @@ -- cgit v1.2.3