From fb452f9a5ab5d05c5a21a75c14486adce0807b2f Mon Sep 17 00:00:00 2001
From: Imre Kaloz <kaloz@openwrt.org>
Date: Mon, 11 May 2009 18:27:33 +0000
Subject: add preliminary support for the successor of the storm port

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15772 3c298f89-4303-0410-b956-a3cf2f4a3e73
---
 .../linux/gemini/patches/002-wbd111_support.patch  | 149 +++++++++++++++++++++
 1 file changed, 149 insertions(+)
 create mode 100644 target/linux/gemini/patches/002-wbd111_support.patch

(limited to 'target/linux/gemini/patches/002-wbd111_support.patch')

diff --git a/target/linux/gemini/patches/002-wbd111_support.patch b/target/linux/gemini/patches/002-wbd111_support.patch
new file mode 100644
index 0000000000..3552ad06c3
--- /dev/null
+++ b/target/linux/gemini/patches/002-wbd111_support.patch
@@ -0,0 +1,149 @@
+--- /dev/null
++++ b/arch/arm/mach-gemini/board-wbd111.c
+@@ -0,0 +1,123 @@
++/*
++ *  Support for Wiliboard WBD-111
++ *
++ *  Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++#include <linux/input.h>
++#include <linux/gpio_keys.h>
++#include <linux/mdio-gpio.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/time.h>
++
++#include <mach/gmac.h>
++
++#include "common.h"
++
++static struct mdio_gpio_platform_data wbd111_mdio = {
++	.mdc		= 22,
++	.mdio		= 21,
++	.phy_mask	= ~(1 << 1),
++};
++
++static struct platform_device wbd111_phy_device = {
++	.name	= "mdio-gpio",
++	.id	= 0,
++	.dev	= {
++		.platform_data = &wbd111_mdio,
++	},
++};
++
++static struct gemini_gmac_platform_data gmac_data = {
++	.bus_id[0] = "0:01",
++	.interface[0] = PHY_INTERFACE_MODE_MII,
++};
++
++static struct gpio_keys_button wbd111_keys[] = {
++	{
++		.code		= KEY_SETUP,
++		.gpio		= 5,
++		.active_low	= 1,
++		.desc		= "reset",
++		.type		= EV_KEY,
++	},
++};
++
++static struct gpio_keys_platform_data wbd111_keys_data = {
++	.buttons	= wbd111_keys,
++	.nbuttons	= ARRAY_SIZE(wbd111_keys),
++};
++
++static struct platform_device wbd111_keys_device = {
++	.name	= "gpio-keys",
++	.id	= -1,
++	.dev	= {
++		.platform_data = &wbd111_keys_data,
++	},
++};
++
++static struct gpio_led wbd111_leds[] = {
++	{
++		.name			= "L3red",
++		.gpio			= 1,
++	},
++	{
++		.name			= "L4green",
++		.gpio			= 2,
++	},
++	{
++		.name			= "L4red",
++		.gpio			= 3,
++	},
++	{
++		.name			= "L3green",
++		.gpio			= 5,
++	},
++};
++
++static struct gpio_led_platform_data wbd111_leds_data = {
++	.num_leds	= ARRAY_SIZE(wbd111_leds),
++	.leds		= wbd111_leds,
++};
++
++static struct platform_device wbd111_leds_device = {
++	.name	= "leds-gpio",
++	.id	= -1,
++	.dev	= {
++		.platform_data = &wbd111_leds_data,
++	},
++};
++
++static struct sys_timer wbd111_timer = {
++	.init	= gemini_timer_init,
++};
++
++static void __init wbd111_init(void)
++{
++	gemini_gpio_init();
++	platform_register_uart();
++	platform_register_pflash(SZ_8M, NULL, 0);
++	platform_device_register(&wbd111_leds_device);
++	platform_device_register(&wbd111_keys_device);
++	platform_device_register(&wbd111_phy_device);
++	platform_register_ethernet(&gmac_data);
++}
++
++MACHINE_START(WBD111, "Wiliboard WBD-111")
++	.phys_io	= 0x7fffc000,
++	.io_pg_offst	= ((0xffffc000) >> 18) & 0xfffc,
++	.boot_params	= 0x100,
++	.map_io		= gemini_map_io,
++	.init_irq	= gemini_init_irq,
++	.timer		= &wbd111_timer,
++	.init_machine	= wbd111_init,
++MACHINE_END
+--- a/arch/arm/mach-gemini/Kconfig
++++ b/arch/arm/mach-gemini/Kconfig
+@@ -16,6 +16,13 @@ config MACH_RUT100
+ 	  Say Y here if you intend to run this kernel on a
+ 	  Teltonika 3G Router RUT100.
+ 
++config MACH_WBD111
++	bool "Wiliboard WBD-111"
++	select GEMINI_MEM_SWAP
++	help
++	  Say Y here if you intend to run this kernel on a
++	  Wiliboard WBD-111.
++
+ endmenu
+ 
+ config GEMINI_MEM_SWAP
+--- a/arch/arm/mach-gemini/Makefile
++++ b/arch/arm/mach-gemini/Makefile
+@@ -11,3 +11,4 @@ obj-$(CONFIG_PCI)	+= pci.o
+ # Board-specific support
+ obj-$(CONFIG_MACH_NAS4220B)	+= board-nas4220b.o
+ obj-$(CONFIG_MACH_RUT100)	+= board-rut1xx.o
++obj-$(CONFIG_MACH_WBD111)	+= board-wbd111.o
-- 
cgit v1.2.3