From f1ff3a410f3bf5b9d7324ce6bddce142e977ba82 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 6 Jun 2008 20:12:05 +0000 Subject: finally fixes etrax toolchain problems, thanks nbd SVN-Revision: 11383 --- target/linux/etrax/patches/100-compile_fixes.patch | 213 ++++++++++++++++++--- target/linux/etrax/patches/301-usb_support.patch | 39 ++-- 2 files changed, 203 insertions(+), 49 deletions(-) (limited to 'target/linux/etrax/patches') diff --git a/target/linux/etrax/patches/100-compile_fixes.patch b/target/linux/etrax/patches/100-compile_fixes.patch index 0455f1f447..a33582ca00 100644 --- a/target/linux/etrax/patches/100-compile_fixes.patch +++ b/target/linux/etrax/patches/100-compile_fixes.patch @@ -1,21 +1,16 @@ Index: linux-2.6.25.4/arch/cris/arch-v10/boot/Makefile =================================================================== ---- linux-2.6.25.4.orig/arch/cris/arch-v10/boot/Makefile -+++ linux-2.6.25.4/arch/cris/arch-v10/boot/Makefile -@@ -2,10 +2,10 @@ +--- linux-2.6.25.4.orig/arch/cris/arch-v10/boot/Makefile 2008-06-06 20:20:55.000000000 +0100 ++++ linux-2.6.25.4/arch/cris/arch-v10/boot/Makefile 2008-06-06 20:21:20.000000000 +0100 +@@ -2,7 +2,6 @@ # arch/cris/arch-v10/boot/Makefile # -OBJCOPY = objcopy-cris -+OBJCOPY = /usr/local/cris/objcopy-cris OBJCOPYFLAGS = -O binary --remove-section=.bss --subdir- := compressed rescue -+subdir- := compressed - targets := Image - - $(obj)/Image: vmlinux FORCE -@@ -14,7 +14,6 @@ $(obj)/Image: vmlinux FORCE + subdir- := compressed rescue +@@ -14,7 +13,6 @@ $(obj)/compressed/vmlinux: $(obj)/Image FORCE $(Q)$(MAKE) $(build)=$(obj)/compressed $@ @@ -25,40 +20,39 @@ Index: linux-2.6.25.4/arch/cris/arch-v10/boot/Makefile @cp $< $@ Index: linux-2.6.25.4/arch/cris/arch-v10/boot/compressed/Makefile =================================================================== ---- linux-2.6.25.4.orig/arch/cris/arch-v10/boot/compressed/Makefile -+++ linux-2.6.25.4/arch/cris/arch-v10/boot/compressed/Makefile -@@ -2,12 +2,11 @@ +--- linux-2.6.25.4.orig/arch/cris/arch-v10/boot/compressed/Makefile 2008-06-06 20:20:55.000000000 +0100 ++++ linux-2.6.25.4/arch/cris/arch-v10/boot/compressed/Makefile 2008-06-06 20:56:01.000000000 +0100 +@@ -2,12 +2,10 @@ # arch/cris/arch-v10/boot/compressed/Makefile # -CC = gcc-cris -melf $(LINUXINCLUDE) ccflags-y += -O2 -LD = ld-cris -+LD=/usr/local/cris/ld-cris ++LD = $(CROSS_COMPILE)ld -m criself ldflags-y += -T $(obj)/decompress.ld OBJECTS = $(obj)/head.o $(obj)/misc.o -OBJCOPY = objcopy-cris -+OBJCOPY = /usr/local/cris/objcopy-cris OBJCOPYFLAGS = -O binary --remove-section=.bss quiet_cmd_image = BUILD $@ -@@ -22,10 +21,10 @@ $(obj)/decompress.bin: $(obj)/decompress +@@ -22,10 +20,10 @@ $(call if_changed,objcopy) $(obj)/head.o: $(obj)/head.S .config - @$(CC) -D__ASSEMBLY__ -traditional -c $< -o $@ -+ /usr/local/cris/gcc-cris -melf $(LINUXINCLUDE) -D__ASSEMBLY__ -traditional -c $< -o $@ ++ @$(CC) -D__ASSEMBLY__ -traditional -Wa,--em=criself -c $< -o $@ $(obj)/misc.o: $(obj)/misc.c .config - @$(CC) -D__KERNEL__ -c $< -o $@ -+ /usr/local/cris/gcc-cris -melf $(LINUXINCLUDE) -D__KERNEL__ -c $< -o $@ ++ @$(CC) -D__KERNEL__ -Wa,--em=criself -c $< -o $@ $(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE $(call if_changed,image) Index: linux-2.6.25.4/arch/cris/arch-v10/boot/compressed/misc.c =================================================================== ---- linux-2.6.25.4.orig/arch/cris/arch-v10/boot/compressed/misc.c -+++ linux-2.6.25.4/arch/cris/arch-v10/boot/compressed/misc.c +--- linux-2.6.25.4.orig/arch/cris/arch-v10/boot/compressed/misc.c 2008-06-06 20:20:55.000000000 +0100 ++++ linux-2.6.25.4/arch/cris/arch-v10/boot/compressed/misc.c 2008-06-06 21:02:10.000000000 +0100 @@ -5,7 +5,7 @@ * adapted for Linux. * @@ -68,7 +62,7 @@ Index: linux-2.6.25.4/arch/cris/arch-v10/boot/compressed/misc.c * adaptation for Linux/CRIS Axis Communications AB, 1999 * */ -@@ -99,7 +99,7 @@ static void error(char *m); +@@ -99,12 +99,12 @@ static void gzip_mark(void **); static void gzip_release(void **); @@ -77,7 +71,14 @@ Index: linux-2.6.25.4/arch/cris/arch-v10/boot/compressed/misc.c /* the "heap" is put directly after the BSS ends, at end */ -@@ -139,7 +139,7 @@ static void gzip_release(void **ptr) +-extern int end; +-static long free_mem_ptr = (long)&end; ++extern int _end; ++static long free_mem_ptr = (long)&_end; + + #include "../../../../../lib/inflate.c" + +@@ -139,7 +139,7 @@ /* decompressor info and error messages to serial console */ static void @@ -86,7 +87,7 @@ Index: linux-2.6.25.4/arch/cris/arch-v10/boot/compressed/misc.c { #ifndef CONFIG_ETRAX_DEBUG_PORT_NULL while(*s) { -@@ -209,9 +209,9 @@ flush_window() +@@ -209,9 +209,9 @@ static void error(char *x) { @@ -99,7 +100,7 @@ Index: linux-2.6.25.4/arch/cris/arch-v10/boot/compressed/misc.c while(1); /* Halt */ } -@@ -257,14 +257,7 @@ decompress_kernel() +@@ -257,14 +257,7 @@ makecrc(); @@ -118,9 +119,9 @@ Index: linux-2.6.25.4/arch/cris/arch-v10/boot/compressed/misc.c } Index: linux-2.6.25.4/arch/cris/arch-v10/mm/init.c =================================================================== ---- linux-2.6.25.4.orig/arch/cris/arch-v10/mm/init.c -+++ linux-2.6.25.4/arch/cris/arch-v10/mm/init.c -@@ -184,6 +184,9 @@ paging_init(void) +--- linux-2.6.25.4.orig/arch/cris/arch-v10/mm/init.c 2008-06-06 20:20:55.000000000 +0100 ++++ linux-2.6.25.4/arch/cris/arch-v10/mm/init.c 2008-06-06 20:21:20.000000000 +0100 +@@ -184,6 +184,9 @@ free_area_init_node(0, &contig_page_data, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0); } @@ -130,3 +131,161 @@ Index: linux-2.6.25.4/arch/cris/arch-v10/mm/init.c /* Initialize remaps of some I/O-ports. It is important that this * is called before any driver is initialized. +Index: linux-2.6.25.4/arch/cris/arch-v10/boot/compressed/head.S +=================================================================== +--- linux-2.6.25.4.orig/arch/cris/arch-v10/boot/compressed/head.S 2008-06-06 20:20:55.000000000 +0100 ++++ linux-2.6.25.4/arch/cris/arch-v10/boot/compressed/head.S 2008-06-06 21:03:05.000000000 +0100 +@@ -10,13 +10,14 @@ + + #define ASSEMBLER_MACROS_ONLY + #include ++#include + + #define RAM_INIT_MAGIC 0x56902387 + #define COMMAND_LINE_MAGIC 0x87109563 + + ;; Exported symbols + +- .globl _input_data ++ .globl input_data + + + .text +@@ -26,7 +27,7 @@ + + ;; We need to initialze DRAM registers before we start using the DRAM + +- cmp.d RAM_INIT_MAGIC, r8 ; Already initialized? ++ cmp.d RAM_INIT_MAGIC, $r8 ; Already initialized? + beq dram_init_finished + nop + +@@ -36,91 +37,91 @@ + + ;; Initiate the PA and PB ports + +- move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, r0 +- move.b r0, [R_PORT_PA_DATA] ++ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0 ++ move.b $r0, [R_PORT_PA_DATA] + +- move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, r0 +- move.b r0, [R_PORT_PA_DIR] ++ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0 ++ move.b $r0, [R_PORT_PA_DIR] + +- move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, r0 +- move.b r0, [R_PORT_PB_DATA] ++ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0 ++ move.b $r0, [R_PORT_PB_DATA] + +- move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, r0 +- move.b r0, [R_PORT_PB_DIR] ++ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0 ++ move.b $r0, [R_PORT_PB_DIR] + + ;; Setup the stack to a suitably high address. + ;; We assume 8 MB is the minimum DRAM in an eLinux + ;; product and put the sp at the top for now. + +- move.d 0x40800000, sp ++ move.d 0x40800000, $sp + + ;; Figure out where the compressed piggyback image is + ;; in the flash (since we wont try to copy it to DRAM + ;; before unpacking). It is at _edata, but in flash. + ;; Use (_edata - basse) as offset to the current PC. + +-basse: move.d pc, r5 +- and.d 0x7fffffff, r5 ; strip any non-cache bit +- subq 2, r5 ; compensate for the move.d pc instr +- move.d r5, r0 ; save for later - flash address of 'basse' +- add.d _edata, r5 +- sub.d basse, r5 ; r5 = flash address of '_edata' ++basse: move.d $pc, $r5 ++ and.d 0x7fffffff, $r5 ; strip any non-cache bit ++ subq 2, $r5 ; compensate for the move.d pc instr ++ move.d $r5, $r0 ; save for later - flash address of 'basse' ++ add.d _edata, $r5 ++ sub.d basse, $r5 ; r5 = flash address of '_edata' + + ;; Copy text+data to DRAM + +- move.d basse, r1 ; destination +- move.d _edata, r2 ; end destination +-1: move.w [r0+], r3 +- move.w r3, [r1+] +- cmp.d r2, r1 ++ move.d basse, $r1 ; destination ++ move.d _edata, $r2 ; end destination ++1: move.w [$r0+], $r3 ++ move.w $r3, [$r1+] ++ cmp.d $r2, $r1 + bcs 1b + nop + +- move.d r5, [_input_data] ; for the decompressor ++ move.d $r5, [input_data] ; for the decompressor + + + ;; Clear the decompressors BSS (between _edata and _end) + +- moveq 0, r0 +- move.d _edata, r1 +- move.d _end, r2 +-1: move.w r0, [r1+] +- cmp.d r2, r1 ++ moveq 0, $r0 ++ move.d _edata, $r1 ++ move.d _end, $r2 ++1: move.w $r0, [$r1+] ++ cmp.d $r2, $r1 + bcs 1b + nop + + ;; Save command line magic and address. +- move.d _cmd_line_magic, $r12 ++ move.d cmd_line_magic, $r12 + move.d $r10, [$r12] +- move.d _cmd_line_addr, $r12 ++ move.d cmd_line_addr, $r12 + move.d $r11, [$r12] + + ;; Do the decompression and save compressed size in _inptr + +- jsr _decompress_kernel ++ jsr decompress_kernel + + ;; Put start address of root partition in r9 so the kernel can use it + ;; when mounting from flash + +- move.d [_input_data], r9 ; flash address of compressed kernel +- add.d [_inptr], r9 ; size of compressed kernel ++ move.d [input_data], $r9 ; flash address of compressed kernel ++ add.d [inptr], $r9 ; size of compressed kernel + + ;; Restore command line magic and address. +- move.d _cmd_line_magic, $r10 ++ move.d cmd_line_magic, $r10 + move.d [$r10], $r10 +- move.d _cmd_line_addr, $r11 ++ move.d cmd_line_addr, $r11 + move.d [$r11], $r11 + + ;; Enter the decompressed kernel +- move.d RAM_INIT_MAGIC, r8 ; Tell kernel that DRAM is initialized ++ move.d RAM_INIT_MAGIC, $r8 ; Tell kernel that DRAM is initialized + jump 0x40004000 ; kernel is linked to this address + + .data + +-_input_data: ++input_data: + .dword 0 ; used by the decompressor +-_cmd_line_magic: ++cmd_line_magic: + .dword 0 +-_cmd_line_addr: ++cmd_line_addr: + .dword 0 + #include "../../lib/hw_settings.S" diff --git a/target/linux/etrax/patches/301-usb_support.patch b/target/linux/etrax/patches/301-usb_support.patch index bfe5c70cf0..8e80eea536 100644 --- a/target/linux/etrax/patches/301-usb_support.patch +++ b/target/linux/etrax/patches/301-usb_support.patch @@ -1,8 +1,7 @@ -Index: linux-2.6.25.4/drivers/usb/Makefile -=================================================================== ---- linux-2.6.25.4.orig/drivers/usb/Makefile -+++ linux-2.6.25.4/drivers/usb/Makefile -@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD) += host/ +diff -x .org -x .orig -x '.c*' -x '.h*' -x .git -x .git -urN clean-2.6.25-rc8/drivers/usb/Makefile source-2.6.25-rc8/drivers/usb/Makefile +--- clean-2.6.25-rc8/drivers/usb/Makefile 2008-04-07 10:26:24.000000000 +0200 ++++ source-2.6.25-rc8/drivers/usb/Makefile 2008-04-07 10:29:40.000000000 +0200 +@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_SL811_HCD) += host/ obj-$(CONFIG_USB_U132_HCD) += host/ obj-$(CONFIG_USB_R8A66597_HCD) += host/ @@ -10,20 +9,18 @@ Index: linux-2.6.25.4/drivers/usb/Makefile obj-$(CONFIG_USB_ACM) += class/ obj-$(CONFIG_USB_PRINTER) += class/ -Index: linux-2.6.25.4/drivers/usb/host/Makefile -=================================================================== ---- linux-2.6.25.4.orig/drivers/usb/host/Makefile -+++ linux-2.6.25.4/drivers/usb/host/Makefile -@@ -17,3 +17,5 @@ obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o +diff -x .org -x .orig -x '.c*' -x '.h*' -x .git -x .git -urN clean-2.6.25-rc8/drivers/usb/host/Makefile source-2.6.25-rc8/drivers/usb/host/Makefile +--- clean-2.6.25-rc8/drivers/usb/host/Makefile 2008-04-07 10:26:24.000000000 +0200 ++++ source-2.6.25-rc8/drivers/usb/host/Makefile 2008-04-07 10:29:40.000000000 +0200 +@@ -17,3 +17,5 @@ obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o +#obj-$(CONFIG_USB_CARNEOL) += hc-crisv10.o +obj-$(CONFIG_ETRAX_USB_HOST) += hc-crisv10.o -Index: linux-2.6.25.4/drivers/usb/host/hc-cris-dbg.h -=================================================================== ---- /dev/null -+++ linux-2.6.25.4/drivers/usb/host/hc-cris-dbg.h +diff -x .org -x .orig -x '.c*' -x '.h*' -x .git -x .git -urN clean-2.6.25-rc8/drivers/usb/host/hc-cris-dbg.h source-2.6.25-rc8/drivers/usb/host/hc-cris-dbg.h +--- clean-2.6.25-rc8/drivers/usb/host/hc-cris-dbg.h 1970-01-01 01:00:00.000000000 +0100 ++++ source-2.6.25-rc8/drivers/usb/host/hc-cris-dbg.h 2008-04-07 10:29:40.000000000 +0200 @@ -0,0 +1,143 @@ + +/* macros for debug output */ @@ -168,10 +165,9 @@ Index: linux-2.6.25.4/drivers/usb/host/hc-cris-dbg.h + }; \ + s; \ + }) -Index: linux-2.6.25.4/drivers/usb/host/hc-crisv10.c -=================================================================== ---- /dev/null -+++ linux-2.6.25.4/drivers/usb/host/hc-crisv10.c +diff -x .org -x .orig -x '.c*' -x '.h*' -x .git -x .git -urN clean-2.6.25-rc8/drivers/usb/host/hc-crisv10.c source-2.6.25-rc8/drivers/usb/host/hc-crisv10.c +--- clean-2.6.25-rc8/drivers/usb/host/hc-crisv10.c 1970-01-01 01:00:00.000000000 +0100 ++++ source-2.6.25-rc8/drivers/usb/host/hc-crisv10.c 2008-04-07 10:29:40.000000000 +0200 @@ -0,0 +1,4800 @@ +/* + * @@ -4973,10 +4969,9 @@ Index: linux-2.6.25.4/drivers/usb/host/hc-crisv10.c +/* Module hooks */ +module_init(module_hcd_init); +module_exit(module_hcd_exit); -Index: linux-2.6.25.4/drivers/usb/host/hc-crisv10.h -=================================================================== ---- /dev/null -+++ linux-2.6.25.4/drivers/usb/host/hc-crisv10.h +diff -x .org -x .orig -x '.c*' -x '.h*' -x .git -x .git -urN clean-2.6.25-rc8/drivers/usb/host/hc-crisv10.h source-2.6.25-rc8/drivers/usb/host/hc-crisv10.h +--- clean-2.6.25-rc8/drivers/usb/host/hc-crisv10.h 1970-01-01 01:00:00.000000000 +0100 ++++ source-2.6.25-rc8/drivers/usb/host/hc-crisv10.h 2008-04-07 10:29:40.000000000 +0200 @@ -0,0 +1,331 @@ +#ifndef __LINUX_ETRAX_USB_H +#define __LINUX_ETRAX_USB_H -- cgit v1.2.3