From f460388ce20403692d06dfbd6ddd7685b15ff555 Mon Sep 17 00:00:00 2001
From: Mirko Vogt <mirko@openwrt.org>
Date: Tue, 5 Feb 2013 14:57:40 +0000
Subject: add support for board named RTA770W

Actually this board is the very same as the rta770bw,
where the additional 'b' within the name just
indicates 'Annex B'. The ADSL Modem itself is able
to handle both, Annex A as well as Annex B -
the loaded firmware makes the only difference

SVN-Revision: 35500
---
 .../brcm63xx/patches-3.8/556-board_rta770w.patch   | 71 ++++++++++++++++++++++
 1 file changed, 71 insertions(+)
 create mode 100644 target/linux/brcm63xx/patches-3.8/556-board_rta770w.patch

(limited to 'target/linux/brcm63xx/patches-3.8/556-board_rta770w.patch')

diff --git a/target/linux/brcm63xx/patches-3.8/556-board_rta770w.patch b/target/linux/brcm63xx/patches-3.8/556-board_rta770w.patch
new file mode 100644
index 0000000000..e0eedad1e7
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/556-board_rta770w.patch
@@ -0,0 +1,71 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -796,6 +796,60 @@
+ 		},
+ 	},
+ };
++
++// Actually this board is the very same as the rta770bw,
++// where the additional 'b' within the name just
++// just indicates 'Annex B'. The ADSL Modem itself is able
++// to handle both Annex A as well as Annex B -
++// the loaded firmware makes the only difference
++static struct board_info __initdata board_rta770w = {
++	.name				= "RTA770W",
++	.expected_cpu_id		= 0x6345,
++
++	.has_uart0			= 1,
++
++	.has_enet0			= 1,
++
++	.enet0 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++	.leds = {
++		{
++			.name		= "RTA770W:green:usb",
++			.gpio		= 7,
++			.active_low	= 1,
++		},
++		{
++			.name		= "RTA770W:green:adsl",
++			.gpio		= 8,
++		},
++		{
++			.name		= "RTA770W:green:diag",
++			.gpio		= 10,
++			.active_low	= 1,
++		},
++		{
++			.name		= "RTA770W:green:wlan",
++			.gpio		= 11,
++			.active_low	= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 13,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.active_low	= 1,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
+ #endif
+ 
+ /*
+@@ -3750,6 +3804,7 @@
+ #ifdef CONFIG_BCM63XX_CPU_6345
+ 	&board_96345gw2,
+ 	&board_rta770bw,
++	&board_rta770w,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6348
+ 	&board_96348r,
-- 
cgit v1.2.3