From f5919b65d4c671fd5083838c7a445f319f9a13c8 Mon Sep 17 00:00:00 2001 From: Stijn Tintel Date: Sat, 10 Nov 2018 13:03:18 +0200 Subject: brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel --- ...-net-phy-add-paged-phy-register-accessors.patch | 208 +++++++++++++++++++++ 1 file changed, 208 insertions(+) create mode 100644 target/linux/brcm2708/patches-4.14/950-0295-net-phy-add-paged-phy-register-accessors.patch (limited to 'target/linux/brcm2708/patches-4.14/950-0295-net-phy-add-paged-phy-register-accessors.patch') diff --git a/target/linux/brcm2708/patches-4.14/950-0295-net-phy-add-paged-phy-register-accessors.patch b/target/linux/brcm2708/patches-4.14/950-0295-net-phy-add-paged-phy-register-accessors.patch new file mode 100644 index 0000000000..51866b4485 --- /dev/null +++ b/target/linux/brcm2708/patches-4.14/950-0295-net-phy-add-paged-phy-register-accessors.patch @@ -0,0 +1,208 @@ +From 8a74a77e9df9565c247da3df37657d6eabb314c6 Mon Sep 17 00:00:00 2001 +From: Russell King +Date: Tue, 2 Jan 2018 10:58:43 +0000 +Subject: [PATCH 295/454] net: phy: add paged phy register accessors + +commit 78ffc4acceff48522b92d8fbf8f4a0ffe78838b2 upstream. + +Add a set of paged phy register accessors which are inherently safe in +their design against other accesses interfering with the paged access. + +Signed-off-by: Russell King +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/phy/phy-core.c | 157 +++++++++++++++++++++++++++++++++++++ + include/linux/phy.h | 11 +++ + 2 files changed, 168 insertions(+) + +--- a/drivers/net/phy/phy-core.c ++++ b/drivers/net/phy/phy-core.c +@@ -305,3 +305,160 @@ int __phy_modify(struct phy_device *phyd + return ret; + } + EXPORT_SYMBOL_GPL(__phy_modify); ++ ++static int __phy_read_page(struct phy_device *phydev) ++{ ++ return phydev->drv->read_page(phydev); ++} ++ ++static int __phy_write_page(struct phy_device *phydev, int page) ++{ ++ return phydev->drv->write_page(phydev, page); ++} ++ ++/** ++ * phy_save_page() - take the bus lock and save the current page ++ * @phydev: a pointer to a &struct phy_device ++ * ++ * Take the MDIO bus lock, and return the current page number. On error, ++ * returns a negative errno. phy_restore_page() must always be called ++ * after this, irrespective of success or failure of this call. ++ */ ++int phy_save_page(struct phy_device *phydev) ++{ ++ mutex_lock(&phydev->mdio.bus->mdio_lock); ++ return __phy_read_page(phydev); ++} ++EXPORT_SYMBOL_GPL(phy_save_page); ++ ++/** ++ * phy_select_page() - take the bus lock, save the current page, and set a page ++ * @phydev: a pointer to a &struct phy_device ++ * @page: desired page ++ * ++ * Take the MDIO bus lock to protect against concurrent access, save the ++ * current PHY page, and set the current page. On error, returns a ++ * negative errno, otherwise returns the previous page number. ++ * phy_restore_page() must always be called after this, irrespective ++ * of success or failure of this call. ++ */ ++int phy_select_page(struct phy_device *phydev, int page) ++{ ++ int ret, oldpage; ++ ++ oldpage = ret = phy_save_page(phydev); ++ if (ret < 0) ++ return ret; ++ ++ if (oldpage != page) { ++ ret = __phy_write_page(phydev, page); ++ if (ret < 0) ++ return ret; ++ } ++ ++ return oldpage; ++} ++EXPORT_SYMBOL_GPL(phy_select_page); ++ ++/** ++ * phy_restore_page() - restore the page register and release the bus lock ++ * @phydev: a pointer to a &struct phy_device ++ * @oldpage: the old page, return value from phy_save_page() or phy_select_page() ++ * @ret: operation's return code ++ * ++ * Release the MDIO bus lock, restoring @oldpage if it is a valid page. ++ * This function propagates the earliest error code from the group of ++ * operations. ++ * ++ * Returns: ++ * @oldpage if it was a negative value, otherwise ++ * @ret if it was a negative errno value, otherwise ++ * phy_write_page()'s negative value if it were in error, otherwise ++ * @ret. ++ */ ++int phy_restore_page(struct phy_device *phydev, int oldpage, int ret) ++{ ++ int r; ++ ++ if (oldpage >= 0) { ++ r = __phy_write_page(phydev, oldpage); ++ ++ /* Propagate the operation return code if the page write ++ * was successful. ++ */ ++ if (ret >= 0 && r < 0) ++ ret = r; ++ } else { ++ /* Propagate the phy page selection error code */ ++ ret = oldpage; ++ } ++ ++ mutex_unlock(&phydev->mdio.bus->mdio_lock); ++ ++ return ret; ++} ++EXPORT_SYMBOL_GPL(phy_restore_page); ++ ++/** ++ * phy_read_paged() - Convenience function for reading a paged register ++ * @phydev: a pointer to a &struct phy_device ++ * @page: the page for the phy ++ * @regnum: register number ++ * ++ * Same rules as for phy_read(). ++ */ ++int phy_read_paged(struct phy_device *phydev, int page, u32 regnum) ++{ ++ int ret = 0, oldpage; ++ ++ oldpage = phy_select_page(phydev, page); ++ if (oldpage >= 0) ++ ret = __phy_read(phydev, regnum); ++ ++ return phy_restore_page(phydev, oldpage, ret); ++} ++EXPORT_SYMBOL(phy_read_paged); ++ ++/** ++ * phy_write_paged() - Convenience function for writing a paged register ++ * @phydev: a pointer to a &struct phy_device ++ * @page: the page for the phy ++ * @regnum: register number ++ * @val: value to write ++ * ++ * Same rules as for phy_write(). ++ */ ++int phy_write_paged(struct phy_device *phydev, int page, u32 regnum, u16 val) ++{ ++ int ret = 0, oldpage; ++ ++ oldpage = phy_select_page(phydev, page); ++ if (oldpage >= 0) ++ ret = __phy_write(phydev, regnum, val); ++ ++ return phy_restore_page(phydev, oldpage, ret); ++} ++EXPORT_SYMBOL(phy_write_paged); ++ ++/** ++ * phy_modify_paged() - Convenience function for modifying a paged register ++ * @phydev: a pointer to a &struct phy_device ++ * @page: the page for the phy ++ * @regnum: register number ++ * @mask: bit mask of bits to clear ++ * @set: bit mask of bits to set ++ * ++ * Same rules as for phy_read() and phy_write(). ++ */ ++int phy_modify_paged(struct phy_device *phydev, int page, u32 regnum, ++ u16 mask, u16 set) ++{ ++ int ret = 0, oldpage; ++ ++ oldpage = phy_select_page(phydev, page); ++ if (oldpage >= 0) ++ ret = __phy_modify(phydev, regnum, mask, set); ++ ++ return phy_restore_page(phydev, oldpage, ret); ++} ++EXPORT_SYMBOL(phy_modify_paged); +--- a/include/linux/phy.h ++++ b/include/linux/phy.h +@@ -644,6 +644,9 @@ struct phy_driver { + int (*write_mmd)(struct phy_device *dev, int devnum, u16 regnum, + u16 val); + ++ int (*read_page)(struct phy_device *dev); ++ int (*write_page)(struct phy_device *dev, int page); ++ + /* Get the size and type of the eeprom contained within a plug-in + * module */ + int (*module_info)(struct phy_device *dev, +@@ -832,6 +835,14 @@ static inline bool phy_is_pseudo_fixed_l + */ + int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val); + ++int phy_save_page(struct phy_device *phydev); ++int phy_select_page(struct phy_device *phydev, int page); ++int phy_restore_page(struct phy_device *phydev, int oldpage, int ret); ++int phy_read_paged(struct phy_device *phydev, int page, u32 regnum); ++int phy_write_paged(struct phy_device *phydev, int page, u32 regnum, u16 val); ++int phy_modify_paged(struct phy_device *phydev, int page, u32 regnum, ++ u16 mask, u16 set); ++ + struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, + bool is_c45, + struct phy_c45_device_ids *c45_ids); -- cgit v1.2.3