From f5919b65d4c671fd5083838c7a445f319f9a13c8 Mon Sep 17 00:00:00 2001 From: Stijn Tintel Date: Sat, 10 Nov 2018 13:03:18 +0200 Subject: brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel --- ...erlays-Add-combine-option-to-i2c-overlays.patch | 104 +++++++++++++++++++++ 1 file changed, 104 insertions(+) create mode 100644 target/linux/brcm2708/patches-4.14/950-0277-overlays-Add-combine-option-to-i2c-overlays.patch (limited to 'target/linux/brcm2708/patches-4.14/950-0277-overlays-Add-combine-option-to-i2c-overlays.patch') diff --git a/target/linux/brcm2708/patches-4.14/950-0277-overlays-Add-combine-option-to-i2c-overlays.patch b/target/linux/brcm2708/patches-4.14/950-0277-overlays-Add-combine-option-to-i2c-overlays.patch new file mode 100644 index 0000000000..3981686cc8 --- /dev/null +++ b/target/linux/brcm2708/patches-4.14/950-0277-overlays-Add-combine-option-to-i2c-overlays.patch @@ -0,0 +1,104 @@ +From 1b02fe3ab446613cadcfac08d611b90becb02189 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 18 Apr 2018 17:04:23 +0100 +Subject: [PATCH 277/454] overlays: Add 'combine' option to i2c overlays + +The i2c0-bcm2708 and i2c1-bcm2708 overlays allow the I2C pin usage to +be changed. The names also suggest they revert to the old i2c_bcm2708 +driver, but they don't. The newer i2c_bcm2835 driver forces +transactions to be combined where possible, but this breaks some +devices. + +Add an option to disable transaction combining, which is currently +implemented by reverting to the old driver. + +See: https://github.com/raspberrypi/firmware/issues/828 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/README | 12 ++++++++++-- + arch/arm/boot/dts/overlays/i2c0-bcm2708-overlay.dts | 8 ++++++++ + arch/arm/boot/dts/overlays/i2c1-bcm2708-overlay.dts | 9 +++++++++ + 3 files changed, 27 insertions(+), 2 deletions(-) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -865,8 +865,9 @@ Params: addr Set the + + + Name: i2c0-bcm2708 +-Info: Enable the i2c_bcm2708 driver for the i2c0 bus. Not all pin combinations +- are usable on all platforms. ++Info: Change i2c0 pin usage. Not all pin combinations are usable on all ++ platforms - platforms other then Compute Modules can only use this ++ to disable transaction combining. + Load: dtoverlay=i2c0-bcm2708,= + Params: sda0_pin GPIO pin for SDA0 (deprecated - use pins_*) + scl0_pin GPIO pin for SCL0 (deprecated - use pins_*) +@@ -874,15 +875,22 @@ Params: sda0_pin GPIO pin + pins_28_29 Use pins 28 and 29 + pins_44_45 Use pins 44 and 45 + pins_46_47 Use pins 46 and 47 ++ combine Allow transactions to be combined (default ++ "yes") + + + Name: i2c1-bcm2708 ++Info: Change i2c1 pin usage. Not all pin combinations are usable on all ++ platforms - platforms other then Compute Modules can only use this ++ to disable transaction combining. + Info: Enable the i2c_bcm2708 driver for the i2c1 bus + Load: dtoverlay=i2c1-bcm2708,= + Params: sda1_pin GPIO pin for SDA1 (2 or 44 - default 2) + scl1_pin GPIO pin for SCL1 (3 or 45 - default 3) + pin_func Alternative pin function (4 (alt0), 6 (alt2) - + default 4) ++ combine Allow transactions to be combined (default ++ "yes") + + + Name: i2s-gpio28-31 +--- a/arch/arm/boot/dts/overlays/i2c0-bcm2708-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c0-bcm2708-overlay.dts +@@ -50,6 +50,13 @@ + }; + }; + ++ fragment@5 { ++ target = <&i2c0>; ++ __dormant__ { ++ compatible = "brcm,bcm2708-i2c"; ++ }; ++ }; ++ + __overrides__ { + sda0_pin = <&frag1>,"brcm,pins:0"; + scl0_pin = <&frag1>,"brcm,pins:4"; +@@ -57,5 +64,6 @@ + pins_28_29 = <0>,"-1+2-3-4"; + pins_44_45 = <0>,"-1-2+3-4"; + pins_46_47 = <0>,"-1-2-3+4"; ++ combine = <0>, "!5"; + }; + }; +--- a/arch/arm/boot/dts/overlays/i2c1-bcm2708-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c1-bcm2708-overlay.dts +@@ -26,9 +26,18 @@ + brcm,function = <4>; /* alt 0 */ + }; + }; ++ ++ fragment@2 { ++ target = <&i2c1>; ++ __dormant__ { ++ compatible = "brcm,bcm2708-i2c"; ++ }; ++ }; ++ + __overrides__ { + sda1_pin = <&pins>,"brcm,pins:0"; + scl1_pin = <&pins>,"brcm,pins:4"; + pin_func = <&pins>,"brcm,function:0"; ++ combine = <0>, "!2"; + }; + }; -- cgit v1.2.3